Question about Motorola FV200 2-Way Radio

1 Answer

NnIn my FV200 estatic noise is continuos and RX signal is always light. Wow can i solve the problem ??

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Prodigy:

    An expert who has answered 500 questions.

  • Expert
  • 607 Answers

Hi,

The problem you have is a problem many others have with these little radios, you only have to read through the other entries on this sight to see that you are not alone.

Motorola is a good brand/Make, but these little units are mass produced under licence in China for a price, and to a specific standard.

My advice, as it has been given to others with your problem, is to buy a reasonable radio, say a 5 watt CB radio HH on ebay, with charger. they are reasonably priced and if something goes wrong, there is always help available to fix them.

You only get what you pay for, and this is very true with radio equipment.

Sorry, that I can't help with your radio, but a better quality radio always gets a fix. To people who take this hobby seriously, we refer to these Chinese made units as toys...

I wish you luck in getting a better radio.

Cheers,
Peter

Posted on Mar 05, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Uniden gmr2638_2ck is always stuck on receive. Rd is always showing and static coming from the speaker


Adjust your SQUELCH control or setting so that the noise disappears. The RX indicator will go out.

Mar 01, 2015 | Uniden Radio Communications

2 Answers

Car wont start....


WOW !! could be so many things and any advice would be a shot in the dark....I would suggest taking it to a machanic

Aug 13, 2012 | 2008 Nissan Maxima

1 Answer

When i play dvds through my rx-v1000 the pro logic light is always on. shouldnt it be decoding a digital signal when im playing a dvd?


Hello,there is a chance that dolby digital isnt turned on on the dvd players audio settings, make sure in the dvd menu its not set to pcm.

Feb 08, 2011 | Yamaha RX-V1000 Receiver

1 Answer

Please send me Canon Ir all model Error code. How can solve it?


Error codes for iR2016i,2020i for other machines codes you need to get the specific manual, these manuals can be downloaded from Ebay, look for user ID ultimate_sacrifice A seller on Ebay.
No. Tx/Rx Description
##0100 [Tx] at time of transmission, the procedural signal has been transmitted more than
specified.
##0101 [Tx/Rx] the modem speed does not match that of the other party.
##0102 [Tx] at time of transmission, fall-back cannot be used.
##0103 [Rx] at time of reception, EOL cannot be detected for 5 sec (15 sec if CBT).
##0104 [Tx] at time of transmission, RTN or PIN is received.
##0106 [Rx] at time of reception, the procedural signal is received for 6 sec while in wait for the
signal.
##0107 [Rx] at time of reception, the transmitting party cannot use fall-back.
##0109 [Tx] at time of transmission, a signal other than DIS, DTC, FTT, CFR, or CRP is
received, and the procedural signal has been sent more than specified.
##0111 [Tx/Rx] memory error has occurred.
##0114 [Rx] at time of reception, RTN is transmitted.
##0200 [Rx] at time of reception, no image carrier is detected for 5 sec.
##0201 [Tx/Rx] DCN is received outside the normal parity procedure.
##0220 [Tx/Rx] system error (main program out of control) has occurred.
##0232 [Tx] encoding error has occurred.
##0237 [Rx] decoding error has occurred.
##0261 [Tx/Rx] system error has occurred.
##0280 [Tx] at time of transmission, the procedural signal has been transmitted more than
specified.
##0281 [Tx] at time of transmission, the procedural signal has been transmitted more than
specified.
##0282 [Tx] at time of transmission, the procedural signal has been transmitted more than
specified.
##0283 [Tx] at time of transmission, the procedural signal has been transmitted more than
specified.
##0284 [Tx] at time of transmission, DCN is received after transmission of TCF.
##0285 [Tx] at time of transmission, DCN is received after transmission of EOP.
##0286 [Tx] at time of transmission, DCN is received after transmission of EOM.
##0287 [Tx] at time of transmission DCN is received after transmission of MPS.
##0288 [Tx] after transmission of EOP, a signal other than PIN, PIP, MCF, RTP, or RTN has
been received.
##0289 [Tx] after transmission of EOM, a signal other than PIN, PIP, MCF, RTP, or RTN has
been received.
##0290 [Tx] after transmission of MPS, a signal other than PIN, PIP, MCF, RTP, or RTN has
been received.
##0670 [Tx] at time of V.8 late start, the V.8 ability of DIS front the receiving party is expected
to be detected, and the CI signal is expected to be transmitted in response; however,
the procedure fails to advance, and the line is released because of T1 time-out.
##0671 [Rx] at time of V.8 arrival, procedure fails to move to phase 2 after detection of CM
signal from caller, causing T1 time-out and releasing line
##0672 [Tx] at time of V.34 transmission, a shift in procedure from phase 2 to phase 3 and
thereafter stops, causing the machine to release the line and suffer T1 timeout.

Dec 12, 2009 | Office Equipment & Supplies

1 Answer

Uniden uh064sx-2 2-Way RX Stuck On


Didyou have any luck resolving this issue? We currently have exactly the same problem

Aug 05, 2009 | Uniden GMR1038-2 (7 Channels) 2-Way Radio

1 Answer

I have a J JVC RX-558V. The mute light is always on so it does not play sound. I can't find the key sequence on the front of the unit to disable Mute?


I have a J JVC RX-558V. The mute light is always on so it does not play sound. I can't find the key sequence on the front of the unit to disable Mute?

Apr 19, 2009 | JVC RX-558V

2 Answers

Motorola FV200 Walkie-Talkie


Scanning Channels
Use scanning to monitor channels for transmissions or to find someone
in your group who has accidentally changed channels.
1. Short press
MENU until the "Z" appears. The current setting
On/Off will flash.
2. Press either
+ or to turn On or Off.
3. Press the PTT to confirm or
MENU to continue set up.

Here is a link to the manual http://www.motorola.com/mdirect/manuals/FV200_userguide.pdf

Oct 23, 2008 | Motorola FV200AA GMRS/FRS 2-Way Radio...

1 Answer

Heavy static noise


Sounds like interference getting in caused by your connecting cables. Suggest upgrading to higher quality ones.

Aug 31, 2008 | Sherwood RX-4103 Receiver

Not finding what you are looking for?
Motorola FV200 2-Way Radio Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1654 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

SHARCNET-USA
SHARCNET-USA

Level 3 Expert

2130 Answers

Are you a Motorola Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...