Question about Projection Televisions

1 Answer

I have 4 polaroid tv's and three of them have lines in them, green or have completely stopped working. One is a 37" lcd flatscreen, and one is a 15" ? lcd flatscreen and one is a little older that is not a flatscreen so please help because I have no warranties and they are junk and why is that

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 140 Answers

You guessed it. They are junk.

Just to make sure things are ok on your end. Have someone check your incoming voltages on your household power. Just to make sure that you voltage is running too high or low. You can even call the power company they will come out and do it for free. Just let them know that you are loosing electronics and are concerned.

In addition, cantact your cable provider and have the check in incoming signal on the house to make sure that it is not being overdriven.

Once you are sure that YOUR utilites are fine then chauk it up to bad design in the TVs and never by polaroid again.

Posted on Jan 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A horizontal band of green and red lines across the screen


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent.
Type in the brand name to your device, in the search box [at the top right] of the display window and the Search will start at once as you type in, and will show you all the related posts. It will make surf easy.

Mar 17, 2015 | Panasonic TC-P46C2 - 46 Inch 720P Plasma...

1 Answer

I have a 50" Phillips


Check ur owner manual or call Philip support Tech. ask it this tv model have a colors wheel design into it tv.Not sure for a Philip model tv 50" DLP tv,but the Samsung model 50" DLP tv this problems alway causes by a dying colors wheel that design into it tv.Which the colors wheel it is warp worn out and spinning off of it motor mount axis to cause grinding noises and tv colors to mess up and flashes or have flashes Black & White within it picture.

Jun 07, 2011 | Philips 50PL9126D/37B 50" DLP TV

1 Answer

TV click on and off.When it come on it has a green screen with lines. Stay on just for about 3 sec. than click off.


The green crt is dawning to much current, and that is why the TV is shutting down, if you remove the speaker cover, there is a focus block, that has six controls, on it three are for red blue, and green screen voltages, if you turn green down where the retrace lines go away, the TV should stay on, it is not worth fixing, you would be better off getting a new LCD.

Feb 11, 2011 | Mitsubishi VS-60707 60" Rear Projection...

1 Answer

37 INCH LCD MAGNAVOX TV WILL NOT TURN ON. MUST BE


This problems,very common in LCD tv,after the tv was in used about a year or two.The new technalogy LCD tv don't handle heat very well,not like the old CRT Tube Tvs.The power supply board tend to have bad capacitors componnents leakage,that bulges up it top or puff up gases escape,that why it take times or couples pushes to the power botton to turn the tv on.U know basic electronic's,and have soldering tools and solders?Take the tv aparts,check for these bad capacitors,that bulges,puff up in the power supply board and replaced them,than ur power will work normal again.Or tries Websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Apr 29, 2010 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Turns off after 30 seconds


i think the convergence amps are weak, or the akb circut has caused the tubes to go bad, google your model number to see if it is in the tube problem. sony made some projos w/ bad tubes in them. tv lasts only three or four years,no cause i had one

Jul 10, 2009 | Sony KP-65WS500 65" Rear Projection...

1 Answer

I have a 32" tv, LCD HD tv Model number FLM323B w/built in HD tuner. It made a poping sound and went completely out. and then came back on for about 15min. and popped again and went completely out the...


Polaroid says the part is the control box,,Cost to fix is around 700.00. Yuck Yuck. Polaroid offered a refurbished tv in place of the one that doesn't work. they offered a 90 day warranty. The costs of shipping my old one back to them was at my expense.....
We are going to buy a new TV... Problem solved,,,Won't buy another Polaroid...

Aug 27, 2008 | Projection Televisions

1 Answer

Error 37


HELLO. the fist this is turn on the set and just let it do it's own thing.!!! for around 7mins to 15 min's and see what happen's and then tell me ok. let me know ok

Aug 18, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Powering on my tv


Dear smmmobil,
The problem lies with the SMPS (switch mode power supply ) of your TV. The smps board needs to be replaced.

ramesh22

Jun 15, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61249 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...