SL-75DRV5 audio driver

here is the download link for soltek sl 75DRV5 E.

Click here to Download

you can see online manual there which open in browser pdf format, you can save it to your computer from there.

Regards
manish

Note that 'SOLTEK' (not 'SOLTEX') was based in TAIWAN, before they went bankrupt. So, any "technical support" that was stored on their web-site is *NOT* available.

So, take a magnifying glass, a strong lamp, and try to read the tiny print embossed onto the motherboard, for any "hints" about which pins are for what purpose.

The manual can be downloaded from this address.

Http://www.k7jo.de/reviews/mainboards/soltek/sl75drv5/75drv5.pdf
On Page 31 of the pdf it shows which wires go to which

Hopefully this helps for you.

You need to install the VIA drivers from the Mainboard driver CD first, then the Audio driver on the same CD. Do it in that order!

HI
Try this Website.

http://www.motherboards.org/files/manuals/118/75drv5.pdf

Hope it helps

Cheers

Yes, you have 3 slots on your mobo, each slot supports 1 GB. Below is a link where you can buy compatible memory for your motherboard.

http://www.crucial.com/store/listparts.aspx?model=SL-75DRV5

send the mother board make and model

Your drivers will be at www.viaarena.com. For your board and windos XP, I would Suggest:

Chipset/AGP/IDE driver: ht tp://www.viaarena.com/Driver/VIA_4in1_443v.zip

Audio Driver: ht tp://www.viaarena.com/Driver/vinyl_v700b.zip

http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=23&Level=4&Conn=3&DownTypeID=3&GetDown=false

Are you saying that another processor is recognised (so board is OK) and that this processor is recognised in another board (so CPU is OK)or are you saying that it is recognised as something else? Have you updated the BIOS? Have you checked the switch settings? SW2 (front of case)should only have DIP6 on; SW1 (back)should either have DIP5 off for autodetect, or DIP1 off for 11.5 multiplier (I think!).