Question about Air Tools & Compressors

Open Question

How to use the cleaning kit for hitachi koki nt65gs

Gas finsih nailer nt65gs

Posted by on


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 1388 Answers

SOURCE: I want to buy a head rebuild kit, for Hitachi coil

I buy most of my parts from The headvalve is the only part that wears in the head. It will leak when the rubber/vinyl seat material begins to crack(new models use rubber). If the head valve looks ok with no cracks then no problem in head. If you are having problems with the gun please post again describing issue. Good luck

Posted on Oct 16, 2010


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My hitachi nail gun won't fire,I opened back up and fan is lying loose inside.Can I fix this

YES always replace the parts and keep safety for all if in doubt clean regulary the cilinder internally because its very thin These cylinders break easily if something is faltering.

Feb 25, 2016 | Hitachi Tools & Hardware - Others

1 Answer

How do I put my NT65GS hitachi nailer back together? I opened it up to clean the connection from the gun to battery and can't seem to get it back together, as I opened it springs fell out and

courageously forward with the drawing , i have it done two times when the cilinder was torn everything is exact on measurements bolts are not longer as needed and neccesary you can replace all thing but make no mistake the ignitioncable must in a gap and having a special lenght its long enough but don,t have tention on that cable it should fitted without tension but its a puzzle the first time .

Oct 13, 2014 | Hitachi NT65GS 2-1-2" 16 Gauge Gas Powered...

1 Answer

Just bought a Nail gun never used one before no manual came with it It's a Hitachi Finish nail gun NT 65MA4

Go to the following address and click on "power tools". Look for "instruction manuals" lower right. Good luck with your new tool.

Aug 21, 2011 | Tools & Hardware - Others

1 Answer

Cleaning instructions for Hitachi NT 65 GS gas nailer please this is a link to a cleaning kit for your hitachi wich should make sure you have everything you need to properly clean the nailer

Aug 04, 2011 | Hitachi Garden

1 Answer

I have an air leak, where can I purchase a gasket set for my framing nailer

Best place for parts is They do not sell a gasket kit. The parts are listed individually. oring kits are available on ebay for about 20.dollars. Use key search "hitachi oring kit". If you have question about your leak and specific cause of leak post again with exact area of leak. Good luck with your repair

May 30, 2011 | Hitachi 3 - 1/4" Framing Strip Nailer

1 Answer

Anybody know where i can get spare parts online for my hitachi nt65gs nail gun

The best is or you could also try

Hope this helps!

Jan 31, 2010 | Hitachi NT65GS 2-1-2" 16 Gauge Gas Powered...

Not finding what you are looking for?
Air Tools & Compressors Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1388 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

205 Answers

Brad Brown

Level 3 Expert

16973 Answers

Are you an Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides