Question about Heating & Cooling
Thanks for your question,
more than likely it would be your Flame sensor, it is more than likely dirty and needs cleaning, it is the rod that the flame impinges on when the unit lites off, if it is dirty then its a matter of removing it and cleaning it with emery cloth, or replacing it, cleaning is the cheaper alternative, just look at the front of the burners, and you will see a pencil thin rod, thats your flame sensor, should be just one 1/4 hex head screw holding it in place, a quarter inch nut driver works great for this, then remove, clean, and reinstall, make sure you have the power off while preforming this task, hope that fixes your problem. please leave a rating for this, thanks again,
Posted on Jan 23, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jul 12, 2015 | Coleman Heating & Cooling
Jan 19, 2014 | Coleman Part 1474.0061 Model Hs780...
Here is a tip that will help you try to figure out why your furnace is not working.
Basic Furnace or Heating System Troubleshooting
Dec 21, 2010 | Heating & Cooling
Nov 29, 2010 | Coleman Heating & Cooling
Oct 24, 2009 | Coleman Heating & Cooling
Oct 25, 2008 | Heating & Cooling
Oct 21, 2008 | Heating & Cooling
May 30, 2008 | Heating & Cooling
May 21, 2008 | Heating & Cooling
May 01, 2008 | Heating & Cooling
266 people viewed this question
Usually answered in minutes!