Question about Kenmore 22422 Top Load Washer

1 Answer

Kenmore series 70 washer won't stop agitating when lid Is lifted.

I have a Kenmore series 70 top load washer that, until recently, would stop when I lifted the lid during the wash cycle ... the aggitator would stop, allowing you to throw in more clothes safetly without getting splashed. Now when I lift the lid the aggitator keeps going. i know the lid switch is working because it stills stops the machine when I lift the lid during the spin cycle. The local service guy looked at the schematic, followed the cyce through the schematic, and told me he didn't think lifting the lid should make any difference during the wash cycle (i.e. he didn't think it was designed to stop aggitating). I'm certain that it used to stop. Can someone confirm that I am not imagining this "lift lid - stop behaviour" and advise how to fix the problem. That is, how can I make it so the aggitator stops when i lift the lid duriing wash cycle? Thanks.

PJ.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

I have a Series 80 and when I lift the lid it does not stop aggitating when in wash mode. When I lift the lid it does stop spinning when in rinse mode. As designed.

To stop wash-mode aggitation at lid-lift, using the existing lid switch and other electrical components, is not easy and not recommended. I can think of a way to do it (triple-pole lid switch) but I will not detail the idea .. for safety concerns.

To stop aggitation, simply use the main settings dial control. You'll save money and possibly prevent a fire hazard!

Posted on Jan 23, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore series 70 washer leaks during rinse?


the was exhaust hose is either plugged or cracked. also check the drain it is put into as this sometimes will be puleeged with fabric from the clothes you wash

Jul 10, 2009 | Kenmore 22422 Top Load Washer

1 Answer

Kenmore 70 series filled and stopped...


Lid switch problem. Press down on lid and try to start machine. Reply.

Jun 15, 2009 | Kenmore 22422 Top Load Washer

1 Answer

My kenmore top loading washer 70 series wont go into spin cycle


check the lid switch some washers will fill and was with the lid open but will not spin, if the lid is closed manually actuate the lid switch or bypass it electrically, or replace it.

Apr 07, 2009 | Kenmore 22422 Top Load Washer

1 Answer

I have a kenmore 70 make ratchet noise ,will not


Probably bad lid switch. Your ratchet noise is normal during the wash cycle.

Mar 24, 2009 | Maytag PAV2300 Top Load Washer

2 Answers

Washer agitates, drains OK, but spin doesn't start


Timer is defective. Your unit has a netural drain. When finished agitating, the shuts down and then starts up reversing to drain and spin. On the initial reverse start, the water drains without the transmission spinning. After a timed period 3-4 minutes, the timer is supposed to pause, stopping the motor for a few seconds. When the motor stops again, the transmission shift to the spin cycle and when the timer resumes power tothe motor it should spin. You are doing the same thing when you lift the lid...stopping the timer and then the tranny shifts and when you set the lid down, the washer spins. Replace the timer.......

Feb 09, 2009 | Kenmore 23822 Top Load Washer

1 Answer

Water won't drain


This is usually caused by the lid safety switch. When the switch malfunctions, The washer believes the lid is open and the washer will not spin or empty. The switch is intended to prevent injury during the spin cycle. The timer could be bad but it is usually the switch..

Jan 21, 2009 | Kenmore 24032\24036 Top Load Washer

1 Answer

Kenmore 70 series washer


the agitator dogs are problably remove agitator cap remove bolt holding agitator in ..dogs are part #80040

Jul 19, 2008 | Kenmore 22422 Top Load Washer

1 Answer

Kenmore 70 series


First thing is to remove the 2 screws from the console, they may be hidden in the front or bacl of console. After removing screws, lightly push the base of the console towards the front of the washer and pick up. This will expose your lid switch connection. Using a jumper wire, jump out the black and white wires then try advancing your washer into spin/drain. The culprit will usually be the lid switch assy.

Apr 04, 2008 | Kenmore 24032\24036 Top Load Washer

8 Answers

Kenmore 70 Series Washer


i have a kenmore 70 series washer model 10020722990
it will fill with water but will not wash. if you put it on spin the water will drain but it will not spin. it sounds like the motor turning. is it a clutch that has broken.

Sep 05, 2006 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Kenmore 22422 Top Load Washer Logo

434 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Sal De

Level 3 Expert

2672 Answers

fordexpert

Level 3 Expert

5627 Answers

Robert Rankin

Level 2 Expert

356 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...