Question about Mitsubishi VS-60607 TV

2 Answers

Mitsubishi vs 60607 circuit board

Hi, I am having the notorious power on/off issue with the mitsubishi vs 60607. Circuit board appears to be the problem for everyone else. I am fairly electronic skilled; Can I do this & do you sell the board?

Scott Norman
poohdog1@yahoo.com
Princeville, IL (near Peoria)

Posted by on

  • Anonymous Feb 04, 2009

    when i turn the tv on after 2 seconds it turns off

  • roberto hobbs Feb 04, 2009

    we have the same problem with my mitsubishi tv the same problem is the on and off problem can you help me please thank you.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

This isn't a notorious problem. many problems can cause this. the instant on/off behavior just says there is one of many fuses blown in the television. you can't just replace the fuse, when it fails get a failure code find out what it means and repair the problem. I would recommend paying someone to do it if you don't want to trash your mits set.
to get the code you hold down the menu and input button for 5 seconds after the on/off sequence. it is a 2 digit code with a pause inbetween, example 2 pause 2 pause 2 pause etc. is a 2.2 code

Posted on Feb 05, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a 2,4 code :( dont know what to do

Posted on Feb 03, 2013

  • luiscarlo632
    luiscarlo632 Feb 03, 2013

    i have a 2,4 code :( dont know what to do

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

VS-60607 turns on then off


2,1 is X-ray protection or excessive High voltage

It is a circuit repair or may be related to a Glycol leak

Mar 13, 2012 | Mitsubishi VS-60607 TV

1 Answer

60607 push button to come on and the code came up 2.2 could u please tell me the problem


This is an error for a short in the power supply/mother board. the fault can be traced by isolation of the circuit after checking the power supply - LT side - and proceeding to isolate the drivers which can be suspect.

Oct 02, 2011 | Mitsubishi VS-60607 TV

1 Answer

I thought i might need a lamp for my mitsubishi tv--model VS 60607 when my tv is fuzzy when turned on.should i simply replace the lamp or is there something else i should try? thank you!


This TV is a rear projection television and does not have a lamp. It has three CRT color guns (Red, Blue, and Green). You have a convergence issue (the red, blue and green color guns aren't aligned properly) and it doesn't sound like a very big one. You should be able to adjust this through the CONVERGENCE Menu in ADVANCED SETTINGS.
More details can be found in your manual, here. The model number isn't exactly the same but I'm sure the process is identical or really close. The other option would be a bad IC (integrated circuit) for the convergence control. This is unlikely unless your picture looks something like this: captainhawk1_15.jpg

May 29, 2011 | Mitsubishi VS-60607 TV

1 Answer

My mitsubishi vs 60607 big screen will not come on...green timer light comes on then off....tried holding down menu and input buttons and the code it gives me is 2 flashes and then 4 flashes...what does...


The 2,4 error code means a problem in the Vertical circuit.

This could (due to the age of the set) be bad solder connections at the vertical output chip or a part bad anywhere in the circuit.

Problem is in Vertical circuit.

If this told you something you did not know, rate this solution as very helpful as I do this here for free.

SD TECH

Aug 16, 2010 | Mitsubishi VS-60607 TV

1 Answer

Mitisubishi 60607 will come on the go right back off


you have a component failure. begin checking the on-board fuses. that should lead you to the circuit that failed. most often it is the convergence circuit. 2nd most is a loss of vertical deflection. this is a tube protection circuit that shuts the set off before it destroys the crt's.

Jan 06, 2010 | Mitsubishi VS-60607 TV

1 Answer

How can i get a schematic for the mitsubishi vs-60607 convergence circuit


U don't,the corporation does not allow it.U can get the convergence kit,comon prob.for all DLP tv.U know how to solders right?try this website for the convergence kit,use what in that kit,should solve ur convergence prob.

Oct 20, 2009 | Mitsubishi VS-60607 TV

2 Answers

When I attempt to turn on my 10-year old 60'' Mitsubish rear projection tv, the power light comes on for a few second and then goes off. Thus I can not power on the tv even after repeated atempts.


Hi, this is a common issue due to the age of this set. The internal power board has failed. You can fix this by replacing the internal power board. Its a single piece of circuitry that can be ordered and shipped to your home for a do it yourself or, you can call a service tech to do it for you.

Mar 09, 2009 | Mitsubishi VS-60607 TV

1 Answer

I need a schematic for a mitssubishi VS-60607 convergence circuit


send me yr email and I can send ya a schematic I have.

larry@riotgun.com

Feb 28, 2009 | Mitsubishi VS-60607 TV

1 Answer

My neighbor has this problem...Their 60" vs60607 Mitsubishi Projection TV turns on and immediately turns off. The timer light blinks when this happens. I looked at the troubleshooting where other people...


My big screen had the same problem. According to my service repair person, the units have a latent defect in the lamp seals. Apparently, the lamps are encased in a silicone based oil. When the seals at the bottom of the lamp housing fail, the oil leaks onto the main circuit board and shorts out the system. The board woudl probably need to be repair or replaced. Again, according to my service person, the manufacturer corrected the design problem in subsequent models by installing a plastic shield across the circuit board.

Jan 01, 2009 | Mitsubishi VS-60607 TV

Not finding what you are looking for?
Mitsubishi VS-60607 TV Logo

Related Topics:

406 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1207 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Jaime Hernandez

Level 3 Expert

2296 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...