Question about Canon imagePROGRAF W6200 InkJet Printer

1 Answer

Print head error

I have a print read error ,and after replacing a new print head, this doesnt solve the problem, any ideas ? cheers in advance

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 254 Answers
Re: print head error

Did you try cleaning the contacts where the print head fits? You might try a qtip moistened with rubbing alcohol or electronic contact cleaner. Sometimes ink will find it's way onto the contact area. Also, make sure you removed the contact protect tape from the new cartrige assembly. Sounds obvious, but I've forgotten this a time or two.

Posted on Jul 10, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

2 Answers

I am getting an error telling me to replace all 4 print heads. I thought it was odd that all 4 would go out at the same time. Should i replace all 4 print heads or is the problem something else? Maybe

This is general problem in hp plotters..
understand the concept: If U R replaced any one of print head in good working printer, printer detects new print head & it will try to align it with others. Printer will print align page to read, while reading if its found any other print heads are poor quality or bad condition, it will say to replace them also.. Some times it may 2,3 or all.
If UR printer is trying to printing align page and reading it, definitely it will detects & displays the faulty /poor quality print heads. U have to replace it..
If UR feels its expensive, try to clean the print heads manually & try for UR luck...
Trailing cable error is 11:11...


Mar 24, 2014 | HP DesignJet 500 InkJet Printer

3 Answers

Lexmark Prospect Pro 205 printhead error

Sounds like you need new printhead. Take a look on amazon for replacement, here: Genuine Lexmark 100xl 100 Print Head 14N0700 14N1339 Printhead for Lexmark.... I hope this was helpful, Cheers


Jan 07, 2011 | Lexmark Printers & Copiers

1 Answer

Epson cx3200 error light is on and screen reads "printing error consult documentation if neccessary contact service" have tried reseting the protection counter but doesnt seem to work any ideas?

look for anything jamming the print head, then try lubricating the bar the print head runs on. power off then gently move the head left to right so spread the oil. hope this helps

Apr 02, 2010 | Epson Stylus CX3200 All-In-One InkJet...

2 Answers

My canon MP610 shows an error message U052 Incorrect print head

Sounds like you have to buy new printhead... take a look on amazon: Amazon com canon mp610 printhead. I hope this was helpful. Cheers

Mar 01, 2010 | Canon MP610 Photo All-In-One Printer

1 Answer

My printer DCP-115C show out the error code "Machine error 4F". How to solve it?

Unfortunately this is an error in print head and need replace.New print head will cost you as much more then new printer then think about new printer.

Nov 05, 2009 | Brother DCP 115C All-In-One InkJet Printer

1 Answer

New print head installed not working well

First thing I would look for is something on the print head contacts. Also is it a new black ink tank? Your old tank may be clogged and thus the ink can not even travel to the print head.

Sep 30, 2009 | Brother MFC-440CN InkJet Printer

4 Answers

Cant scan to computer

Unfortunately many of the All-In-One devices are like this. If the Cartridges are installed but empty the system is reading that fault code as the Cartridges not being installed. Even though you are not using the ink the printer is most likely doing a light head cleaning when it cycles. Replace teh cartridges and it should clear up.

Aug 27, 2009 | Canon PIXMA MP470 All-in-One Printer

1 Answer

Black ink not working

increase the colour back and if this doesnt work try deep cleaning and if that fails its the cartridge ........i have had the same problem and deep cleaning on the printer via the computer program for printers solved it .
go to start..then to control panel look for printers and faxs icon right click it then gpo to properties and look for advanced and in you go direct the computer to printer deep cleaning and then try that first cheers... tids2u@

Jan 21, 2009 | Canon PIXMA MP750 All-In-One InkJet...

2 Answers

I have a machine error 36 of brother dcp-115c help me

Machine error 36
**Head/carriage unit travel error***

Try to find any obstacles on the travel path of the head/carriage unit. If you cannot find, next steps are:

- Replace the carriage PCB.
- Replace the head/carriage unit.
- Replace the CR encoder strip.
- Replace the carriage motor.
- Replace the main PCB.
- Replace the power supply PCB.
- Replace the maintenance unit.

Nov 14, 2008 | Brother DCP 115C All-In-One InkJet Printer

2 Answers

Print head problem( no ink getting to head)

Did you ever find a solution to this seems like the EXACT same problem I have with this same printer......PLEASE HELPPPPPP!!!!!!!

Jul 24, 2007 | Canon imagePROGRAF W6200 InkJet Printer

Not finding what you are looking for?
Canon imagePROGRAF W6200 InkJet Printer Logo

Related Topics:

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Printers & Copiers Experts


Level 3 Expert

93738 Answers

old marine
old marine

Level 3 Expert

1293 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Canon Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides