Question about Panasonic Car Audio & Video

1 Answer

How do I set radio stations into my car stereo?

I don't know how to program radio stations into my new stereo and the manual doesn't tell me.

Posted by on

  • 1 more comment 
  • phill_grant Jan 24, 2009

    I have a Panasonic CQ-RX300N which has Cd, USB, Ipod, Blue tooth capabilites which the manual tells me about. But there is 6 radio station buttons along the front and I don't know how to preset the stations to them? Can you help?
    Cheers Phill

  • Keith Methot
    Keith Methot May 11, 2010

    what kind of radio.....

  • Anonymous Mar 14, 2014

    When I remove the front panel from the stereo it forgets all my pre set stations . This means I have to re set them every time I get in the car


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 112 Answers

Have you tried just holding the preset button down ??

Posted on Jan 24, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why does the car radio change stations by it self

Sticking tuning buttons and their switches is quite a common fault.

Aug 03, 2014 | Metra 40-cr10 2007-2008 Dodge Caliber R/t...

1 Answer

How can I program the kenwood kdc252u to turn on and off with the ignition? As of now the unit stays on after I turn the vehicle off, or stays off after I turn it on.

you have wires crossed or not hook up ignition switch for radio stereo power wire connects to cars ignition.stereo memory (yellow or orange wire) connects to constant power for radios memory(rad stations /clock)

Feb 26, 2014 | Kenwood KDC-252U

3 Answers

Radio wont find any stations

tuner IC TEF6901 probably failed - needs new tuner unit that cannot be purchsed!

Jul 06, 2012 | Visteon Car Audio & Video

1 Answer

I recently purchased a JVC KD-R521 car stereo, was i have set the demo to off, clock set and radio stations programmed and turn ignition off it just goes back to factory settings. its driving me mad

try switching the main red and yellow power wires on the link harness with the shrouded push in connectors - i had the same problem and all sorted now!

Sep 13, 2011 | JVC Car Audio & Video

1 Answer

I have the Wharfedale ICS182 Bluetooth In-Car CD Radio but I have lost the manual. I remember reading that you could program up to 10 telephone numbers into the stereo, which can be used to dial through...

the other solution is so your stereo holds it's memory when you turn off the want to know how to store numbers into the unit...
try on here.......

May 20, 2011 | Car Audio & Video

1 Answer

Don't know how to save and assign radio channels

ok change the channel to what u want to listen to then hold the number 1 button for like 3 sec or 5 secs then that channel is programed to channel 1 repeat steps for button 2 3 4 5 ect... with ur other fav stations u like to listen to.. then u can press the fm button to go to fm 2 which again u can program 1 through how ever many channel numbers ur radio shows now program different stations other then the ones u just programed on fm 1 choose 5 or 6 other station the fm2 just offers u more stations to program other wise just program the normal 5 or 6 stations to ur radio

May 16, 2011 | Car Audio & Video

1 Answer

How do i set radio stations on my car stereo j.v.c. kd s6060

Select radio from the source and select FM as the band. Now use an auto search or a manual search and as the signal locks you can hold on the preset button ( start from1) to be memorized on the set. you can repeat this for all the other stations. Punch in the frequency if you know it and memorize.

Feb 08, 2011 | JVC Car Audio & Video

1 Answer

Having programmed by car stereo with the FM stations I required (newly bought car, 1 year old), I find that the programmed button number 3, which is programmed to station 97.3 jumps to 102.7 without...

you may have auto seek (rds) which when the signal is weak it will search for the same station or one it thinks is the same station with a stronger signal, you should be able to turn this function off, also the button normally acts as "2" presets so the switch may be defective

Jan 03, 2010 | Car Audio & Video

1 Answer

Radio manual terracan

Thank you for your quick response to my email but in the meantime a friend who has the same audio system in his car solve the problem for us.

Oct 18, 2009 | Car Audio & Video

1 Answer

Cannot play ipod in 99 daewoo lanos

instead of pressing the left/right scanning buttons hold them and then let go when you want to stop

Aug 15, 2009 | Daewoo Lanos 1999 Car Radio/stereo...

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

492 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4724 Answers


Level 3 Expert

63291 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Panasonic Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides