- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
No these only fit on epson scanners due to the specific plug on the attached cable.you need and epson most models from 1200 series,1600 or 2400 series or 3600 will accept the transparency adapter.i have an old 1640 series that has one of these adapters.you can source a cheap scanner off eBay and download the drivers off epson site.then attach the scanner AFTER you install the software and it will find the scanner and connect to computer.Epson do provide a good scanning program as part of the download.you will need to choose negative or positive to scan.higher spec scanners have built in transparency hoods and can scan at higher resolutions.quite honestly if you are okay with say 6x4 inch prints a basic scanner is fine if it scans at least 2400 dpi.
Unfortunately the bulb on the scanner is not available on retail stores. Epson does not allow end users to take the scanner apart because they might not be able to put the scanner back in together because of the scanner's engineering design.
Please log on to support.epson.com. Click on help me find a service center to the right of the page to search for an epson certified servicer near to your area.
Please trash the twain driver completely. - Trash epson scan and epson scanner monitor from applications. - Go to hd. Go to library, then application support. Trash epson scanner module. - Go back to library. Click on image capture. Trash twain data sources. - Go to the hd. Click on users. Click on your computer name. Click on Library. Click on preferences. Click on the epson folder. Trash epson scan. - Empty the trash and restart your mac. Log on to epson.com. Install the epson11926.dmg.
The E6 Scanner lamp can be substituted by a standard F8T5CW lamp. It is 12 insches long, uses 8 watts, is in the T5 tube size with two prongs at each end and cool white, not warm white. The replacement lamp works fine.
Try this as a last ditch effort.
Remove the software.
Reboot the computer and come off line.
Disable the Anti Virus program.
Now install the soft ware.
If the red light still flashes then assume it is new scanner time.
Perhaps this: the scanner calibrates itself on a white strip above the
place where the lamp is in rest. When there is a spot on that white
strip, the scanner wil use the retreived information for the whole
scan, resulting in a line on your scan.