Question about Office Equipment & Supplies

1 Answer

Canon copier ir 3100 cn error code E000602 - 0202

The copier statrs up normally then shows error code and no further action occurs

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 38 Answers

The hard drive containing the software that drives the machine has an error. Corrective steps would be to contact to a Canon technician, who can first try to re-install the software, and if this doesn't work the hard drive has probably crashed, meaning that the drive will need to be replaced and the software re-installed

Posted on Jan 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon ir 3100 cn E805 003


E805 fan error
Description

With the ITB fan in operation, the machine does not detect a lock state for 5 sec continuously.
Remedy
Turn off the main power, and check the DC controller PCB; then, turn the power back on.
Remarks
Disconnected fan connector; absence of lock signal because of fault in fan.

Nov 09, 2010 | Canon Office Equipment & Supplies

1 Answer

IR 3100 error. E020-01A9, E020-02A9,


E020-01A9 Error Code : iR C3100 Series
Hi there
I have looked it up and what it says about it I have put down for you so you can gave it a try hope it works for you.
Approved
Symptom
E020-01A9 Error Code.

Cause
For ATR control, the detected Toner/Density ratio exceeds the lower limit (3%) 3 times continuously for Yellow

Action
The ATR Sensor and Patch Image Read Sensor both determine toner density. Depending on the density readings the copier will or will not add toner. Check the status of the Drum Unit under COPIER>DISPLAY>MISC>DRUM-LIFE. The Patch Image Read Sensor looks at a patch of toner that is generated on the drum for each colour and determines the amount of toner that is in the patch by the amount of reflected light. If the drum is not creating the patch correctly, the patch reading will be affected. Replace the Drum Unit if it is 80% of its rated life or higher. ..

Feb 16, 2010 | Canon iRC3100 Printer

2 Answers

Ir3100 : E00070-003 error code


canon ir 3100 error code E00070-003

Oct 23, 2009 | Canon imageRUNNER C3200 Copier

3 Answers

Error


E000007-0000 code is Fixing Film error.
FM2-3346-000
1 FIXING FILM ASSEMBLY 120V
FM2-3353-000
1 FIXING FILM ASSEMBLY 230V EXCEPT CN
FM2-3329-000
1 FIXING FILM ASSEMBLY 230V CN

Sep 11, 2009 | Canon iR 2016i Black and White Copier

1 Answer

Canon IR 3100 CN needs pasword


you need to clear thepassword in this order touch ADD FUNC key then the 2 and 8 keys together then touch ADD FUNC key again lcd screen should change touch copier then function then clear then pwd then ok then yellow reset 3 times that should do it

Aug 24, 2009 | Canon imageRUNNER C3200 Copier

3 Answers

Error 805 and 803


Hello sir; The error code you display 803 & 805 could be come from same problem, both all are composite board 24 volt supply problem, replace composite board will take care this problem. good luck.

Jul 24, 2009 | Canon imageRUNNER 400S Copier

2 Answers

Cannon IR 3100 CN Itermediate Transfer Belt error code E00070-000


The E00070-000 is not a ITB problem, but a full wastetoner. Open the front cover find the white bottle in the middle, remove the black screw, remove the cover over the top of the bottle and empty the bottle. Be sure to clean the top of the bottle so the sensor can see that the bottle is empty. Restart the copier.

Jun 04, 2009 | Canon iRC3100 Printer

1 Answer

I have a problem with the printer in ir 3100 cn


Change the printer properties setting on the computer from Normal or Draft where it is not to Best. That'll fix you up.

May 25, 2009 | Canon iRC3100 Printer

4 Answers

Canon ir 3100 cn error code e000020-0081


HP Photosmart C 310series-driver Vindows Vista

Aug 09, 2008 | Canon imageRUNNER C3200 Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

390 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...