Question about EliteGroup ECS A780GM-A Motherboard - AMD 780G, Socket AM2+, ATX, Audio, Video, HDMI, PCI Express 2.0, Gigabit

1 Answer

ECS A780GM-A USB Problem

Hello, I am using ECS A780GM-A mainboard with 32 bit Vista SP1 included. I have a big problem with my Philips SRM 5100 dongle with this mainboard. When I plug and play SRM 5100 USB Dongle Vista automaticaly setup the USB driver and my remote working exactly. After restarting Vista , USB Dongle Driver became UNKNOWN USB DRIVER on the device maneger, and SRM 5100 doesnt work at all. In order to use SRM 5100 every time when Vista starts, i have to unplug the USB dongle then plug the USB dongle. Any advice about this boring problem? Thanks a lot.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

I had a simular problem  turn off your computer  hit the power button and go to bios  make sure the dongle is plugged in  is the computer trying to load from the dongle  disable this item if it is  are you running a raid on this computer if not  select the ide option in bios  you should have three choises  RAID APHCI  IDE  choose IDE and then recheck  thats how i fixed my simular problem  i hope that helps 

Posted on Mar 28, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Crashes from DDR 1 ram over 2 gigs and all usb devices.

Hello from here you can download a manual:

It supports:

Dual channel DDR memory architecture
DDR400/333/266 DDR SDRAM
4 x 184-pin DDR SDRAM DIMM socket support up to 4 GB

One of the ram modules could have a defect
Try insert one at the time.
You must have a windows 64 bit system to use more than 3 Gb
Try to update the mainboard drivers
The one for the chipset
The ram slots probably not take modules bigger than 1 Gb
There is too types of ram Ecc and non Ecc.
Ecc ram does not work on this mainboard.

Good luck

Oct 27, 2012 | ECS Elitegroup Kn1 Sli Lite Socket 939...

1 Answer

I have a QMAX ADM 3000+ motherboard Model LC-B350TX. Can I use this with Windows 7 Home Addition?

Hello this mainboard should match:

A 32 bit windows will probably run fine on this.

You can use this software to find more detailed info:

It could also be this mainboard:

Here is only drivers for vista but some times it will run on win 7.

Check for the mainboard number it should be stamped in near the pci socket or the ram

Good luck

Oct 26, 2012 | Motherboards

1 Answer

Driver install

If you are installing windows 7 32-Bit then you can use windows vista 32-bit driver for ECS RC410m
I`v gone through just install windows vista`s drivers..

Mar 18, 2010 | MSI RC410M-L Motherboard

1 Answer

Green lines in black/grey screen (only vista, xp runs normal)

It's the onboard video try removing the CMOS battery and placing it back in after serveral hours, if that doen;t work it's the onboard Video replace it with a PCI Express Video Card.

Jul 27, 2009 | EliteGroup ECS A780GM-A Motherboard - AMD...

1 Answer

Hi .. i got some problems with a780gm-a plz help :

try to re install the audio driver or dowload it

then if the same problem. check the hardware the audio device

Apr 09, 2009 | EliteGroup ECS A780GM-A Motherboard - AMD...

1 Answer

I plug in just about anything USB and the problems start

if u using any external usb hub than u must ignore the hub and plug ur usb device directly on usb . if u arent using external usb hub than u must install compatible chipset driver for ur system or re install usb drivers too.enjoy and good luck

Mar 26, 2009 | EliteGroup ECS A780GM-A Motherboard - AMD...

1 Answer

ECS780G USB Problem


this sounds like a driver issue as it is not being recognised upon boot up try and download the lastest driver for this device


Jan 23, 2009 | EliteGroup ECS A780GM-A Motherboard - AMD...

2 Answers

ECS 761GX-M754(V3.0A) Motherboard, No Graphics Acceleration in Xp

Were the correct drivers installed into XP.
It seems to me no video drivers are in XP and you are running on the windows ones

Nov 12, 2008 | EliteGroup ECS 761GX-M754(3.0A) Socket...

2 Answers

VIA CBP 4.0 Modem Driver for Windows Vista Ultimate!

This is driver for VIA CBP USB for Vista 32-bit

Oct 14, 2008 | Intel Motherboard

Not finding what you are looking for?
EliteGroup ECS A780GM-A Motherboard - AMD 780G, Socket AM2+, ATX, Audio, Video, HDMI, PCI Express 2.0, Gigabit Logo

385 people viewed this question

Ask a Question

Usually answered in minutes!

Top EliteGroup Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

5660 Answers


Level 3 Expert

733 Answers

Are you an EliteGroup Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides