Where can i get a user manual for a nuvelli solar powered hands free car kit

Cantz bluetooth speaker sometimes pairs with tower and as often not.

There's no manual available, but if you want to pair your headphones with a computer or a phone follow this steps:

1.- Fully charge headphones (leds turn from red to steady blue
2.- Press for 8 seconds the lower button on the right (it has a phone symbol)

pressing the "phone" button will turn on the headphones, but if you keep pressing it will force the device to go to " Pair mode" you call tell is ready by noticing the LEDs turning blue and red. onces pairing is successful you will see a steady blue LED.

Connecting a Bluetooth headset or car kit You can listen to music over a Bluetooth stereo headset, or have hands-free conversations using a compatible Bluetooth headset or car kit. It's the same procedure to set up stereo audio and hands-free.

• For you to listen to music with your headset or car kit, the headset or car kit must support the A2DP Bluetooth profile.
• Before you connect your headset, you need to make it discoverable so your phone can find it. You can find out how to do this by referring to your headset manual.

1. From the Home screen, press MENU, and then tap Settings > Wireless & networks.
2. Tap Bluetooth settings.
3. If the Bluetooth check box is not selected, select it to turn Bluetooth on.
4. Make sure that the headset is discoverable.
5. Tap Scan for devices. Your phone will start to scan for Bluetooth devices within range.
6. When you see the name of your headset displayed in the Bluetooth devices section, tap the name. Your phone then automatically tries to pair with the headset.
7. If automatic pairing fails, enter the passcode supplied with your headset.

The pairing and connection status is displayed below the hands-free headset or car kit name in the Bluetooth devices section. When the Bluetooth headset or car kit is connected to your phone, the Bluetooth connected icon is displayed in the status bar. Depending on the type of headset or car kit you have connected, you can then start using the headset or car kit to listen to music and/or make and receive phone calls.

http://www.scosche.com/ecom/download/CBHSOL5_SglPg.pdf

There are parrot hands free manuals available at http://www.parrot.com/uk/support/userguides/#CK3100

The 3300 is not there but pairing seems to be pretty standard on all the parrot hands free kits. I'd try the CK3100 as it appears to be a very similar kit.

Press and hold both the red and the rotary buttons for some 3 seconds, until the indicator light flashes alternately in red and green. It is in pairing mode now, thus visible for other devices, for the next 3 minutes. Then, make your phone's bluetooth application search for new devices. After a little while, your car kit should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '1234'. If the pairing process is successful, the car kit should sound a beep. By the way, if your car kit's user guide happens to be missing, feel free to download it from this location. You will find many details about settings for your car kit there.

Please, let me know if I can help you any further. Regards, Carlos

You need to put your hands free device into pairing mode this is usually done by turning the power on and keeping the power button pressed in for about 10 seconds after the power has come on. Then you should get a solid LED light up, (depends on device)

On the phone go into

1 Settings
2 Wireless and Networks
3 Bluetooth Settings
4 Turn on Bluetooth
5 Scan for devices

The name of your hands free kit should appear, select this and the phone will ask if you want to pair with the device, confirm this. You probably will get asked for a passkey or password this is usually four zeros or 1,2,3,4. enter this and confirm. Your device should now be paired and each time you want to use it just turn on your handset Bluetooth then your hands free device and your good to go.

Press and hold both the red and the rotary buttons for some 3 seconds, until the indicator light flashes alternately in red and green. It is in pairing mode now, thus visible for other devices, for the next 3 minutes. Then, make your phone's bluetooth application search for new devices. After a little while, your car kit should appear on-screen. Select it and make it connect. If a pairing code (or PIN, or passkey) is requested, enter '1234'. If the pairing process is successful, the car kit should sound a beep. By the way, if your car kit's user guide happens to be missing, feel free to download it from this location. You will find many details about settings for your car kit there.

Please, let me know if I can help you any further. Regards, Carlos

default pairing code is 1234.
Just search on your phone and select the parrot as your bluetooth device.
You can find a user guide for the parrot here.

good luck