Question about Husqvarna Viking 1

1 Answer

Removing the covers on a viking 980 - Husqvarna Viking 1

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Husqvarna Expert
  • 104 Answers

I assume you're talking about the main back and front cover. Unless you really are skilled, I'd leave this project to a professional.
I've worked on the Designer I, II type machine and I believe yours has similar construction. You need screwdriver bits with a 6 pointed "star" head. Screws in the cover itself are "H10" size. Screws in the base are "H15" size. The back cover has to be taken off first before you can get at screws for the front cover. Typically there are 5 screws on the back cover that have to be removed and 2 in the bottom of the base. Note that the front and back covers "snap" together and have to be unsnapped after the screws are removed. If you have to take off the front cover (requires removing more screws in the cover and base), be careful with the various wiring harnesses that attach to the main circuit board.

Posted on Jan 22, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi! I am looking to buy a used sewing machine, and I'm currently trying to figure out what is the difference between a viking prisma 980 and a viking prisma 990. What are the differences?


Be sure to check these machines out very carefully. They have electronic boards that, after 25-30 years, may be nearing their end of life with very few or no replacements available.

Jul 25, 2017 | Sewing Machines

1 Answer

How do you oil a Viking 980 sewing machine


most all machines have a red mark or circle by the holes in the machine that take the oil

Oct 07, 2014 | Sewing Machines

1 Answer

Viking 980 foot pedal not making contact with machine although machine has power.


It could be lint jammed into the jack the cord plugs into. Make sure the jack and plug are both clean and free of lint. It also could be a damaged cord. If a friend has a working Viking pedal try borrowing theirs to see if it works on your machine. If not, your machine might need service.

Sep 15, 2014 | Husqvarna Viking 1

1 Answer

Viking 980 foot pedal not making contact with machine although machine has power.


Are you sure the cords are not broken inside the wiring? It happens to lots of electronic things.

Sep 15, 2014 | Husqvarna Viking 1

1 Answer

How do i dismantel a viking sewing machine 6000 model 6440?


You can remove the rear cover by taking out two screws on the back cover and a screw at the lower rear corner on the side. With this cover removed you can see most of the internal levers and mechanism and be able to access some (not all) components.

Jul 03, 2014 | Husqvarna Viking 1

1 Answer

Bobbin threading


you can check youtube to see if they have a video
or check with husqvarna to see if they have a manual
also
sewingpartsonline.com
sewusa.com

May 29, 2012 | Husqvarna Viking 1

1 Answer

Husqvarna Viking Prisma 980 pop then smoke, but still works


Suggest that it be serviced by an authorized Husqvarna Viking Dealer. You can find the nearest dealer by click on the "Dealer" link at http://www.husqvarnaviking.com
Good luck.

Apr 11, 2009 | Husqvarna Viking 1

1 Answer

My Husqvarna Viking 980 continues to sew when I take my foot off the petal. Sometimes the stich get very tight when this occurs. Could this be the foot petal or is my circuit board going out?


I have never seen it be the circuit board, always is the foot control switch. I dont understand the stitch getting tight though. And yes, it could be the circuit board.

Mar 07, 2009 | Husqvarna Viking 1

Not finding what you are looking for?
Sewing Machines Logo

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

184 Answers

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...