Question about Radio Shack Pro-82 Scanner

Open Question

Im trying to program my hyperscan pro-2040 - Radio Shack Pro-82 Scanner

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1274 Answers

SOURCE: im trying to program my Pro-70 Hyperscaner

Turn the unit on, Press MANUAL, enter the channel number, then press MANUAL, enter the frequency you want including the decimal point, then press E to enter, if you make a mistake, press CLR twice to erase....hope this was helpful...You can get your frequency's for your state at www.RadioReference.com .....

Posted on Apr 23, 2010

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Get lots of information on the Hyperscan


There is lots of information and discussion HERE at the Hyperscan forums.

on Mar 14, 2009 | Mattel Hyperscan Game Console

Tip

Games can be copied


The games that are for the Hyperscan console have no copy protection, and can be copied with freeware burning software.

on Mar 14, 2009 | Mattel Hyperscan Game Console

1 Answer

Can't scan the cards what do i do and it is the hyperscan system


Here is a link that will take you to the Hyperscan forum where other users blog their issues, and resolutions. Hope that this is of some use to you.

http://www.linuxforums.org/forum/other-linux-distributions/111485-using-linux-mattel-hyperscan-game-console.html

Mar 23, 2011 | Mattel Hyperscan Console

1 Answer

I have a hyperscan 200 channel pro-2039 can not pick up a channel!


Hi jermiah, my name is John. Welcome to FixYa. Press the MAN button, Enter the channel number you want to store the frequency in. Press the PGM button, using the number keys , enter the frequency you want. Then press the ENTER button. Thanks for choosing FixYa....John

Nov 29, 2010 | Radio Communications

1 Answer

I need a manual for a realistic pro 37 hyperscan scanner radio any suggestions


Your manual is no longer available as a single document, but you can download and print individual sections of it, at no cost, here:

http://support.radioshack.com/support_electronics/28537.htm

Bill B
Listening in since the 60's

Oct 08, 2010 | Radio Communications

1 Answer

I have a radio shack hyperscan 200 channel pro-2039 programmable scanner. How do I erase ALL the stored frequencies so I can start over again?


You can initialize the scanner to delete all information that you've programmed into it and return it to its original factory settings. To do this:

1. Turn the scanner OFF, then turn it ON again.
2. Press and hold down the CLEAR key and insert a pointed object, such as a paperclip or the point of a pen, into the RESET opening in the back of the scanner, and press the button inside the opening.
3. Release RESET. When information reappears on the scanner's display, release the CLEAR key.

NOTE: You must release the RESET button before releasing the CLEAR key.

Also note that this procedure may not be necessary. Programming a new frequency into a channel automatically deletes the frequency previously stored in that channel.

Bill B
Listening in since the 60's

Oct 05, 2010 | Radio Shack Radio Communications

1 Answer

Need programmer codes for a pro-64 hyperscan scanner


Programmer codes? If it's the operating frequencies for agencies in your area that you're looking for, you can find them and a lot of other useful scanning information at:

www.RadioReference.com

Need the operating manual for your scanner? You can download and print it here:

http://support.radioshack.com/support_electronics/36549.htm

Bill B

Jun 08, 2010 | Radio Communications

2 Answers

Im trying to program my Pro-70 Hyperscaner


To program a known frequency into your PRO-70:

- Press PGM. PGM appears on the display, indicating that the scanner is in programming mode.
- Enter the number of the channel that you wish to program (1 - 50), then press PGM again. As an alternative, press PGM repeatedly until the desired channel number appears on the display.
- Enter the desired frequency, including the decimal (for example, 156.045).
- Press E/L-OUT to store the frequency.
- Repeat steps 2 - 4 to program another frequency.

Your scanner's operating manual has details on other programming steps. If needed, you can download/print the manual here:

http://support.radioshack.com/support_electronics/doc62/62177.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:

www.RadioReference.com

Bill B

Apr 23, 2010 | Radio Shack Pro-97 Handheld Scanner

1 Answer

Yahoo and ims installing


when u go to internet explorer it wont allow u to enter because u r restricted by firewall one u allow the yahoo by giving permission to ur firewall otherwise u disable the firewall u can

Mar 16, 2008 | SonicWALL Pro 2040 Firewall

Not finding what you are looking for?
Radio Shack Pro-82 Scanner Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Shack Radio Communications Experts

John
John

Level 2 Expert

509 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Jason

Level 2 Expert

211 Answers

Are you a Radio Shack Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...