Question about Computers & Internet

4 Answers

HCL HCM780M CIRCUIT DIAGRAM

I am a HCL Monitor user .my monitor is classified as HCM780M ,17 inches .when i on my monitor some components starts burning on monitors mother board. i consulted a monitor mechanic he said that some components have badly burn,because of which he could not find its value.he said that it could'nt be repaired until
he gets a CIRCUIT DIAGRAM for my monitors mother board

please , any one provide me a circuit diagram for my monitors mother board
specified :
brand :hcl,no:HCM780M,17 inches
my e mail id :akhil.nair77@gmail.com

Posted by on

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

SIR..., regarding monitor...display block characteristics which is operated manually by buttons situated bottom of monitor is anytime coming at the centre of monitor display... The settings block comes on suddenly and we are unable to exit from the same sometimes the block goes off without any action and everything is fine till it is back again and it is come again and again.....by all this i did'nt work on my PC...all result it's useles......please sir giving your suggestion as soon as possible....... This has been happening for the last 1 year and is a real pain Please send some solution

Posted on Jul 27, 2010

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I have hcl hcm780m moniter circute diagaraam

Posted on May 07, 2011

  • umashankerpa
    umashankerpa Apr 17, 2013

    in my hcl monotor show horizenta line please give me help

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I am a HCL Monitor user .my monitor is classified as HCM782M ,17 inches .when i on my monitor some components starts burning on monitors mother board. i consulted a monitor mechanic he said that some components have badly burn,because of which he could not find its value.he said that it could'nt be repaired until he gets a CIRCUIT DIAGRAM for my monitors mother board please , any one provide me a circuit diagram for my monitors mother board specified : brand :hcl,no:HCM782M,17 inches my e mail id :u.kumar81@yahoo.com

Posted on Oct 13, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi Jafar, Request you to kindly mail me the circuit diagram of hcl hcm780m moniter circute diagram of hcl hcm780m Monitor. I am stuck with the power circuit board issue. Regards, Banan. kmbanan@gmail.com

Posted on Nov 06, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

BenQ Q24W5 LCD monitor circuit diagram


HI.............


Repairing BenQ 17′ LCD Monitor

benqlcd.jpg
I came across a common fault problem in BenQ 17′ LCD Monitor. The problem is have power but no display. Once you has opened the LCD cover, check the pico fuse for open circuit (very common), the push pull transistors C5707 for short circuit and the Buck royer circuit p-channel fet FQU11P06 also for short circuit too. For your information, if you can't get the FQU11p06 you can always use FU9024N as a replacement. Resolder all the high voltage transformer pins and replace the components above and I'm sure you will bring back the life of this BenQ 17′ LCD Monitor.
You may go to this fairchild semiconductor website to download the spec of the FQU11P06 P-channel FET.

http://www.fairchildsemi.com/ds/FQ/FQU11P06.pdf


GOOD LUCK.............

Sep 23, 2011 | Computers & Internet

1 Answer

17'' samsung synchmaster 794MG model display but screen shrinks from all sides ,After few seconds display becomes very small just about in single inch size .


hit your MONITOR lightly on left side or right side or on top & then observe ..........you will get normal picture or it comes & again it goes....if it is happening like that then following is the situation..........after 4 or 5 yrs in some monitors on main board ( also on CRT circuit board ) at some soldering joints crack develops....then due to loose contact picture becomes small in size or abnormal width,etc ...........when we hit that lightly then those loose contacts joins temporarly & again picture appears for some time............so solution is ......monitor main board & CRT circuit board should be observed carefully & most of the joints should be re-soldered.......only a good service engineer can do that........even after hitting monitor lightly if there is no response then main board has to be checked completely........in your case iam sure it is loose connection problem.........joints should be re - soldered ...100% it works again ................this problem cannot be solved by user unless user has idea about components( resisitors, transisitors, diodes,...etc) , have soldering iron , multimeter & other tools....................so contact good monitor service engineer .............iam from bangalore - 09986222774 - sathyavijayasarathibabu@ymail.com ( computers, laptop, printers, etc )..............

Apr 14, 2011 | Samsung SyncMaster 753S 17" CRT Monitor

1 Answer

Monitor ,crt, 17inc, in dead condition.(hcl)


He means it's not worth repairing it's cheaper to get a new one its value is zero $

Aug 04, 2009 | ViewSonic G70fB (Black) 17 inch CRT...

1 Answer

Monitor problem


Not a solution but I am having the same problem. Besides this time, it says on my screen, and half of my screen is outlined by a blue box and it a bit darker than the other half. My Monitor buttons do not work either ... (Besides the turn on/off)

Feb 24, 2009 | Computers & Internet

2 Answers

HCL 17" monitor display problem


Hi there ,
It seems that you have a vertical section problem ,It might be possible some capacitor might have gone wrong

Jan 24, 2009 | Samsung SyncMaster 753S 17" CRT Monitor

1 Answer

Monitor problem


Sounds like an inverter problem. If the power supply is internal replace the capacitors coming out of the voltage regulators. These are usually 1000mf and/or 470mf. If that doesn't do the trick look up the numbers on the 8-pin chips that drive the secondary transformers on the inverter to see if they are getting the right voltages.
Good Luck!

Feb 12, 2008 | Computers & Internet

2 Answers

Monitor display problem


It seems that your menu switch is short. If you can open up the Monitor check out the connection of your switch and the related components, clean with Spirit or alchohol, check out the switches, if found faultty replace it. That should solve the problem. Good luck.

Dec 05, 2007 | Relisys TL 700A (White) 17" LCD Monitor

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

2,616 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

98879 Answers

David Payne
David Payne

Level 3 Expert

14089 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...