Question about ViewSonic N3735W 37 in. LCD TV

1 Answer

Viewsonic LCD TV - Picture/Sound goes out after 1st power up

I just bought a Viewsonic LCD TV. After being turned off for hours (sleep, work, etc), when it is powered on it behaves fine for a few minutes. Then the sound will suddenly turn to crackling static, the picture will get neon lines overlayed, and it becomes unresponsive to remote AND power button on the unit. Once I unplug and replug in (no wait required) the unit will be fine for as long as its left on with no visible or audible lasting effects from the 'freak out'.

Any ideas?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 356 Answers

Hi visceran,
I am happy to help, unfortunatly your main/input board is malfunctioning, it is a problem with the processor. I had a 32' Viewsonic on my bench last week with the same symptoms.
If the tv is new you should contact Customer Service asap, also check on the return policy of the store you bought it from. Many times it is alot easier to return to the merchant than to ship to repair facility.
Let me know how it goes and if you need further assistance.
Please rate this solution. Lone99star

Posted on Jan 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Viewsonic LCD TV N4280p haven't picture and no sound ,but turn on


Hello
There is some missing output voltages from the power supply regulator board to your tv. Normally, these board are replaced as card basis. some of them are repairable too. You have to check this board first, to find whether it is repairable or not. If not replace it as card basis.
2_8_2012_4_19_29_pm.jpgTwo vies of the power baord to your TV is attached here. This board can be purchased either from the authorised service center for Viewsonic at your town, or from any electronic sparepart selling shops at your town.2_8_2012_4_20_00_pm.jpg

Feb 08, 2012 | ViewSonic N4280P TV

1 Answer

Viewsonic N2060w no picture but sound My Viewsonic was working fine yesterday, now when i Turn on there is power going to the TV but no picture on the screen?


LCD backlight has gone out , you can verify this by holding a flash light up to the scene to see image , www.partstore.com or www.shopjimy.com where you can buy the part and put it in yourself would save you money

Oct 04, 2011 | ViewSonic N2060w 20 in. LCD Television

1 Answer

Viewsonic N2060w no picture but sound My Viewsonic was working fine yesterday, now when i Turn on there is power going to the TV but no picture on the screen?


Can be related to a possible fault in the inverter board , failure of the back light . Please check the power to the board and check the back light circuit.

Oct 04, 2011 | ViewSonic N2060w 20 in. LCD Television

1 Answer

Please help>>>I just bought it...When


Any set just bought or within the 1 year warranty, I would not work on because it voids the warranty call the company and try to take back and get new one.

Mar 09, 2011 | ViewSonic VT2300LED 23 in LCD TV

1 Answer

My TV is just over a year old and out of warranty. When i turn the TV on, I can see a backlight/glow to the screen, but there is no picture, not even the usual screensaver blue screen I usually have on...


Sound like ur Tuner board have problems or dead.Tries unplug,replug the tv an hour later let it reset itself.The tv might work again,somtimes u have to turn the off/on the power button again couples times to make the tv work.Not replaced the Tuner signal board should solved ur problems.

Apr 19, 2010 | ViewSonic N4785p 47 in. LCD TV

1 Answer

Picture goes away not sound ,hit the back of tv


You need to take the back off the set, with the power off, turn it on, then probe around with a long, wooden chopstick until you find the problem.

Apr 05, 2010 | ViewSonic N2750w 27 in. HD-Ready LCD...

1 Answer

Screen Goes Black After About an Hour


Check the power board inside the TV, possible bad capacitors. I just had them replaced on mine.

Sep 21, 2008 | ViewSonic N3251w 32 in. LCD HDTV

3 Answers

Viewsonic N3000w LCD TV randomly shuts off...


It seems that the power fails quite often with this one burning the Inverter boards transformers. OZ960G chip may not be broken, so try getting a new power from somewhere. Measure the transformers. suppose to be somewhat 5 ohms. tolerance is +-1.5 ohm. of more, replace.

Nov 21, 2007 | ViewSonic N3000W 30 in. HD-Ready LCD...

1 Answer

Viewsonic w3250n no sound, no picture, beeping


Hi, Any other indicators aside from the beeping sound like blinking leds/lights? For the time being try to do a hard reset, unplug the LCD TV from the mains for a couple of hours and thereafter try again with a known good outlet.. If still a no go, post back, Good luck and kind regards.

Aug 26, 2007 | ViewSonic NextVision N3200w 32 in....

Not finding what you are looking for?
ViewSonic N3735W 37 in. LCD TV Logo

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top ViewSonic Flat Panel Televisions Experts

Cindy Wells

Level 3 Expert

4757 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a ViewSonic Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...