Question about Linksys Wireless-G WRT54GS Router (e125894)

1 Answer

Change the existing password to new password - Linksys Wireless-G WRT54GS Router (e125894)

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Linksys Master
  • 32,281 Answers

To reset the Linksys back to the default settings - Press and hold the pinhole RESET button at the back of the router with the power ON for 20 secs. then release the RESET button.
To connect to your wireless router, the router's wireless settings needs to be configured with the SSID, encryption etc. and also the wireless cards in all the laptops/computers needs to be configured with these router's wireless settings. Then the laptops/desktop computers can communicate with your wireless router.
Connect a LAN cable from the Linksys to the LAN port on your computer.
Open a browser and enter the Linksys configuration URL
http://192.168.1.1
The default login = admin
The default PW = admin
You can protect your router by changing the default admin PW (write it down and put it in a safe place)
Go to the wireless configuration and set up the SSID and WPA or WPA2 encryption to protect your wireless network and Internet from unauthorized access.
Now apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on this link and follow my instructions :- http://www.fixya.com/support/r3559128-wireless_router_security

Posted on Jan 13, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What do I do when asked to change my password because my existing one has expired?


Once a password has expired it can't be changed because in order to change a password, you must first enter the old existing password and then change it. So what you have to do is re-register. Since you haven't been specific about what the product is I can only answer in generalities.

Sep 22, 2014 | Active Password Recovery Software Active@...

1 Answer

How to get a new user account password


for xp

Click the "Start" button.

Double-click "User Accounts."

Select the user account you wish to change.

Select "Change My Password." If you wish to remove the password, select "Remove My Password."

Enter the existing password in the first field.

Enter your new password in the second and third fields.

Enter a password hint in the fourth field.

Click "Change Password."

hope this helps


Aug 31, 2012 | Computers & Internet

2 Answers

Need a password for a Phillips DVD player. i accidently put parent control on my DVD and now it will not play without a password, How can I fix this?


Select this to set the password for Parental control and Disc
Lock. The default password is '136900'.
To change the password:
1) Press OK twice to access the change password menu.
Old Password
New Password
Confirm PWD
OK
2) Use the numeric keypad 0-9 on the remote control to
enter your existing six-digit password at { Old Password }.
Note: When doing this for the first time or if you forget your
existing password, enter '136900'.
3) Enter the new six-digit password at { New Password }.
4) Enter the new six-digit password again at { Confirm PWD }.
5) Press OK to confirm and exit.

Jun 12, 2011 | Computers & Internet

2 Answers

Change user name


Hello,

Please indicate the Model of the router you are referring to.

If its Cisco, first do a no username xxx password nnn command on the existing configuration. Then on the global configuration mode insert a new command with the new username and password. See example below:

#configure terminal
(config)# no username old-username password old-password
(config)# username new-username privilege 15 password new-password
(config)# exit
# wr memory

May 05, 2011 | Computers & Internet

1 Answer

I have new e-mail address, and they say there is an existing account associated with my new address. Problem logging into facebook. I beleive the existing account is mind. Changed internet providers.


If the email is yours, you should be able to log in with it. If you forgot the password associated with it, have them send you the password to that email address and check the email for the lost password. If it is not yours, then you are out of luck...

May 02, 2011 | Facebook Computers & Internet

1 Answer

DVD players requires a password to operate. Don't know it. How do you reset it


I am not sure of your model, but if it is a Philips DVD player, the manual for a DVP3982 (Philips) shows information about disc lock/parental control setup (page 44).

The default password is '136900'.

To change the password:
1) Press OK to access the change password menu.

2) Use the numeric keypad 0-9 on the remote control to enter your existing six-digit password at { Old Password }.

Note: When doing this for the first time or if you forget your existing password, enter '136900'.

3) Enter the new six-digit password at { New Password }.

4) Enter the new six-digit password again at { Confirm PWD }.

5) Press OK to confirm and exit.

You can but try it. It may or may not work. As I said, I am not sure of your model number (you didn't provide it).

Apr 21, 2011 | Philips Televison & Video

1 Answer

How to change password dont remem ber old one


The default password is 136900.

The user manual (page 44) briefly details the general setup preferences, including;

To change the password:

1) Press OK to access the change password menu.
2) Use the numeric keypad 0-9 on the remote control to enter your existing six-digit password at { Old Password }.

Note: When doing this for the first time or if you forget your existing password, enter '136900'.

3) Enter the new six-digit password at { New Password }.
4) Enter the new six-digit password again at { Confirm PWD }.
5) Press OK to confirm and exit.

It shouldn't matter what your old password was, if you forget it, try the default, then confirm and exit.

Mar 09, 2011 | Philips DVP3982 DVD Player

1 Answer

How it set passord ?


hello


to set the new password in your computer or replace the existing password you have to press CTRL+ALT+DEL and choose change password and if asking for old password, enter your old password and at the second box enter your new password and at the third box confirm your new password press ok and thats it.

enjoy

Mar 01, 2011 | Computers & Internet

1 Answer

Panasonic KX-T7633 - cannot change time


It has a password and it does exist. One that absolutely works is **1234. You could try those same digits in your login, but there's no guarantee. It also is only good at the phone wired to jack one unless the installer set it up in class of service.

Carl

Mar 24, 2009 | Panasonic KX-T7633 Corded Phone

2 Answers

Aip ssm password recovery


The following password recovery options exist:

If another Administrator account exists, the other Administrator can change the password.

If a Service account exists, you can log in to the service account and switch to user root using the command su - root.
Use the password command to change the CLI Administrator account's password.
For example, if the Administrator username is "adminu," the command is password adminu. You are prompted to enter the new password twice.

You can also reimage the sensor using either the recovery partition or a system image file. This will default the device.

Mar 13, 2008 | Computers & Internet

Not finding what you are looking for?
Linksys Wireless-G WRT54GS Router (e125894) Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Galve
Michael Galve

Level 3 Expert

1269 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...