Question about Bulova Watch
I need instructions to set the time on my Nine West sports watch - its several years old. It has a "Mode" button on the left side, and an "Adjust" button and an "Alarm" button on the right side.
SOURCE: Casio PRT-10 Sports Watch
The easy way is to go to casio's web site, type in your country, the click support, click watches, click manual, then give them the information and you will be able to download a new manual, so that you are able to fix any of your current or future problems with it. Casio is a great brand and they offer great support.
Posted on Dec 05, 2007
Here is the manual from GAP customer service.
Dear gap.com Customer,
Thank you for your email regarding the Sporty Printed Watch user
instructions. Please accept our apologies that no directions were
received with your order.
The instructions are as follows:
Standard Time Adjustment:
1. To set the time, press the Mode button three times (The seconds and
the word Tuesday should start flashing).
2. If the seconds position shows less than 30 seconds, pressing the
Start button will reset the seconds to 00. If the seconds position shows
more than 30 seconds, pressing the Start button will reset the seconds
to 00 and the minutes will increase by 1.
3. Press the Reset button until the area you want to change starts
flashing (i.e., second, minute, hour, day, month, and weekend. Press
Start button once for per unit increment, press and hold for 3 seconds
for speedy advance.
4. At completion, press Mode button to resume standard time display.
To reset the Alarm:
Press the B: Mode button until you reach the alarm.
Press the D: Restart button.
Press the C: Restart button to get back to the time
Posted on Dec 13, 2008
I think I figured it out: (Start + Reset) = toggle alarm on/off ("ALM" will display in upper left corner when alarm is on. (press Mode once) will bring you in chrono mode, where "start" button starts and stops the chrono, and "reset" button resets it back to zero (press Mode once more) will bring you to setting of time for alarm. Set the "hour" value by pressing "start" repeatedly, then press "reset" and set the "minute" value by pressing "start" repeatedly (press Mode once more) will bring you to setting of time for actual time. Reset the "Seconds" value to zero by pressing "start" button once, then press "reset" and set the "minute" value by pressing "start" repeatedly, then press "reset" and set the "hour" value by pressing "start" repeatedly (if it shows "H" in upper right corner, time will be displayed euro-style 0:00-23:59, if it shows "A" time will be displayed 12am/12pm), then press "reset" and set the "day of month" value by pressing "start" repeatedly, then press "reset" and set the "month" value (1-12) by pressing "start" repeatedly, then press "reset" and set the "day of week" value (Su-Sa) by pressing "start" repeatedly (press Mode once more) voila!
Posted on Jun 12, 2009
Stop Solo Digital watch beeping every hour:
1 - Press and Hold RESET button
--- (keep holding while doing step two) ---
2 - Press START and you should notice the left circular display (with the alarm image) lose it's ring of blocks.
--- It should also beep once to indicate the change. ---
That should be it.
This was done with a black and gray Solo™ 30m Water Resist Digital Watch
Posted on May 21, 2010
Tips for a great answer:
Apr 30, 2011 | Armitron Digital Sport #40/8105GRY Watch...
Jun 20, 2010 | Watches
Feb 13, 2010 | Watches
Feb 03, 2010 | Watches
Jan 26, 2010 | Casio Phys Sports Gear Watch
May 01, 2009 | Timex T5G341 Sports Radio Control Watch
May 27, 2008 | Casio Wave Ceptor WV57HA-1AV Wrist Watch
438 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: