Question about Casio Parts Cash Register PC Desktop

1 Answer

CE-7000 Program Departmental Names and program post receipt print

Hi there,

I'm using a CE-7000 Cash Register and would like to change one of my department names , does anyone know the program code to do that?

Secondly, I am trying to program the cash register to reprint receipts, how can i program the CE7000 to reprint a post finalization receipt? Help, anyone know the code?

Hope to hear from someone soon!

Posted by on

  • kelvin_abcd Jan 29, 2009

    Hey Hey,

    Thanks for your reply! can i just check for the post receipt programming, if i require more than one post receipt,do i just change the 1 to 3 if i wanna allow 3 post receipt prints ?


  • kelvin_abcd Jan 31, 2009

    Thanks so much for all the help!! It's been great, I can reprint my receipts now but only when the receipt on/off is switched to off mode, any idea if I can reprint a post receipt when the receipt on/off is switched to the on mode?

    Hope to hear from someone soon! Thanks so much!!!




×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 737 Answers

Hi.

Turn key to program.
3 SUBTOTAL
100000000000
RECEIPT
SUBTOTAL

That should allow you a post receipt.

To set dept names:


Turn key to program.
2 SUBTOTAL
Department number
05
SUBTOTAL
Type new name
CASH
SUBTOTAL

If it gives an error when pressing CASH, then repeat, but press 00 button before CASH (some models need this).

Posted on Jan 25, 2009

  • flexion1
    flexion1 Jan 29, 2009

    I think so.
    That's a lot of receipts. You must have quite a bit of accounting going on. Don't forget that you will have every transaction recorded on the journal roll as well. Always run a journal or you will severely damage the printer.

    Mark


  • flexion1
    flexion1 Jan 31, 2009

    The receipt switch must be set to off mode, or the machine does not keep the receipt in memory for re-prints.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to prints two receipts on a casio pcr-t500 cash register


Hi. Yes, it needs the setting for extra receipts turned on in advanced programming.
It is called "Allow to issue post receipt even when original one has been issued". Find that in your manual and there is an example showing how to program these settings.
If you have lost the manual, one of the users has a PCRT500 programming manual here:
http://the-checkout-tech.com/manuals/cashregisters/Casio_PCR-T500_PCR-T520_Operation_and_programming_manual.html

Apr 05, 2014 | Casio Cash Register

1 Answer

I have a Casio CE 6100. I need to change the Departmental names. I misplaced my manual. Kindly Help. Odipo Otieno!


hi. Try this
Turn key to program 2 SUBTOTAL Type the new name 00 - double zero button press the department

Oct 09, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

I have casio ce-3700 cash register and i have problem E04 and noies come beep any one help me plz.


This is caused by incomplete initialisation. it means the program may be corrupt from being unplugged for too long, or you may have a bad battery inside the machine (change it every five years).
Firstly, try a flag clear to jump it back to REG mode:
Turn power off at wall Turn key to program position Hold down RECEIPT FEED button. Keep your finger on it. Turn power on at wall Wait 5 seconds, then let go of RECEIPT FEED Press SUBTOTAL
Turn key back to REG mode and try it. If the programming is corrupt, you will often see the decimal point in the wrong place.
If you want to re-program it, there is a manual for the CE-3700 here:
http://the-checkout-tech.com/manuals/TOC/cashregisters/Casio/CE-3700%20operators%20and%20programming.TOC.pdf

Aug 26, 2010 | Casio Parts Cash Register PC Desktop

1 Answer

CASH REGISTER CASIO CE 3115 DISPLAY E 03 AND ALARM


This ino might help: Cleaning ERRORS: ______________________________

1.- Turn the Mode lock to OFF
2.- Press down the RECEIPT FEED button
3.- Turn the key to PROGRAM
4.- Lift up RECEIPT FEED button (FFFFFFFFFF)
appears on the display panel
5.- Press SUBTOTAL (wait for receipt to issue)
6.- Turn Mode Switch back to REG and use as Normal.
Also another bit goes like this:
RESET: _______________________________________

1.- Insert the OW key and turn to OFF
2.- Hold down the JOURNAL FEED button and turn the key to PROGRAM mode
3.- Release the JOURNAL FEED button. The display should shows "00000000".
4.- Turn the key to OFF
5.- Turn to REG1. The display shows "INIT" and "0.00"
6.- Press the number 10801 and then press SUBTOTAL. Initialisation is completed when the printer stops operation. The display shows: "_ 0.00"
Hope this helps in restting to factory settings................................sodeep

May 12, 2009 | Casio Parts Cash Register PC Desktop

2 Answers

Casio tk 3200 cash register as stoped responding


Hi.
Try a flag clear:

Turn key to PROGRAM mode.
Turn power off at wall.
Hold RECEIPT FEED down - keep your finger on it.
Turn power on at wall.
Wait 5 seconds, then let go of RECEIPT FEED.
You should see "FFFFFFFFFF" on display.
Press SUBTOTAL.

Now turn key back REG mode and try it.

May 08, 2009 | Casio Parts Cash Register PC Desktop

1 Answer

CASIO SA 1000


Hi.
I haven't worked on an SA-1000, but it will probably be the same as the other Casios.

This should work for the CE-7000 and possibly the SA-1000:

Turn key to program mode.
2 SUBTOTAL
Department number
05 SUBTOTAL
Type new name
00
CASH
SUBTOTAL

To input the new name, just use the keyboard. It will act as a character input keyboard. The layout should be shown in your user manual.

Mark

Jan 30, 2009 | Casio Parts Cash Register PC Desktop

2 Answers

A error in cash register casio ce-4250


Hi.
Try this:

Turn key to PROGRAM mode.
Turn power off at wall.
Hold RECEIPT FEED down.
Turn power on at wall.
When you see 'FFFFFFFFFF' on display, let go of RECEIPT FEED.
Press SUBTOTAL

Let me know if you still have trouble.

Mark

Jan 19, 2009 | Casio Parts Cash Register PC Desktop

1 Answer

When i start tk 7000 cash register i get er004 message


Hi.

Try this:

Turn key to PROGRAM mode.
Turn power off at wall.
Hold RECEIPT FEED down.
Turn power on at wall.
When you see 'FFFFFFFFFF' on display, let go of RECEIPT FEED.
Press SUBTOTAL

Now look at the print out and tell me what the big number is right at the bottom.

Mark

Dec 25, 2008 | Casio Parts Cash Register PC Desktop

2 Answers

Casio TK2300: how to programme a department name?


Hi.
To program department names,

Turn key to Program mode.

2 SUBTOTAL

Dept number

05

SUBTOTAL

Type new name

CASH

SUBTOTAL

To set two receipts,

3 SUBTOTAL

2001000000

Now press your receipt button

SUBTOTAL

Hope this sorts it out.
If you have any problems, let me know.

Mark

Oct 12, 2008 | Casio Parts Cash Register PC Desktop

6 Answers

Casio CE-3700 cash register MAC instructions


Hi. I would advise both of you to try a flag clear first to see if you have any program left.

Turn key to program. Power off at wall.
Hold RECEIPT FEED, and turn power on at wall.
Wait 10 seconds, then let go of RECEIPT FEED.
When you see 'FFFFFFFFF' press SUBTOTAL.
Turn key back to REG and try it.

If you still need help, let me know.

Mark

Apr 15, 2008 | Casio Parts Cash Register PC Desktop

Not finding what you are looking for?
Casio Parts Cash Register PC Desktop Logo

384 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Retail Supplies Experts

Electroboy
Electroboy

Level 3 Expert

1594 Answers

tomferryman

Level 1 Expert

42 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Are you a Casio Retail Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...