Question about Sta Rite Sta-Rite Max-E-Therm High Effiency - Propane Heater - 333,000 BTU

Open Question

Reading the wrong temperature - Sta Rite Sta-Rite Max-E-Therm High Effiency - Propane Heater - 333,000 BTU

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a frigidare range and it is flashing F10 and Beeping repeatedly


The "F10" error code caused by the runaway temperature.

The first thing I would check is the resistance across the oven temperature probe (aka oven temperature sensor) terminals at the EOC (electronic oven control) plug.

It suppose to be about 1100 Ohms at the room temperature.

If the resistance at the EOC plug is wrong, then measure the oven temperature probe resistance at the probe plug.

If it's wrong - replace the oven temperature probe. It's better to hardwire it, using a high temperature ceramic wire nuts.

If the readings at the EOC and at the oven temperature probe plug are different - check the wire harness between the oven temperature probe and the EOC.

If there is nothing wrong with the oven temperature probe resistance - replace the EOC.
Here is the probe to order.
Here is the EOC to order.

Jan 07, 2013 | Frigidaire PLEF398AC Electric Kitchen...

2 Answers

2002 Ford explorer outside temperature reading is wrong. Changed temperature sensor between grill and radiator but still wrong temperature reading on dash. Reads 10 degrees too low all the time and it does...


This may be a wiring issue as the sensor is electronic in nature. Any loose wiring may cause the voltage across the sensor to differ resulting in an inaccurate reading.

Oct 16, 2011 | 2002 Ford Explorer

2 Answers

F10 oven code frequently beeps,often after cooking is over and oven is coolind down at different temperature settings tempermental some times it works sometimes it does not.


The "F10" error code caused by the runaway temperature.
The first thing I would check is the resistance across the oven temperature probe (aka oven temperature sensor) terminals at the EOC (electronic oven control) plug.
It suppose to be about 1100 Ohms at the room temperature.
If the resistance at the EOC plug is wrong, then measure the oven temperature probe resistance at the probe plug.
If it's wrong - replace the oven temperature probe. It's better to hardwire it, using a high temperature ceramic wire nuts.
If the readings at the EOC and at the oven temperature probe plug are different - check the wire harness between the oven temperature probe and the EOC.
If there is nothing wrong with the oven temperature probe resistance - replace the EOC.

Jul 15, 2011 | Frigidaire Ovens

1 Answer

Frigidaire FEF352BADB electric range gives an F3 error code when oven is turned on. The oven temperature sensor apparently is good as it reads about 1050 ohms. What else can I check and how?


F3 - Open oven temperature sensor (RTD)

Check sensor harness and harness connection between oven sensor and oven control. Replace oven temperature sensor (RTD) if wiring is ok.

It suppose to be about 1100 Ohms at the room temperature. If the reading there is wrong, check the sensor resistance at the sensor plug and the wire harness. If there is nothing wrong then replace the control board.

Hope helps.

Jun 14, 2011 | Kitchen Ranges

1 Answer

Was cleaning oven and error code F10 appeared what is a error code F10?


hello there"
The "F10" error code caused by the runaway temperature.

The first thing I would check is the resistance across the oven temperature probe (aka oven temperature sensor) terminals at the EOC (electronic oven control) plug.

It suppose to be about 1100 Ohms at the room temperature.

If the resistance at the EOC plug is wrong, then measure the oven temperature probe resistance at the probe plug.

If it's wrong - replace the oven temperature probe. It's better to hardwire it, using a high temperature ceramic wire nuts.

If the readings at the EOC and at the oven temperature probe plug are different - check the wire harness between the oven temperature probe and the EOC.

If there is nothing wrong with the oven temperature probe resistance - replace the EOC.

- The part number for the oven temperature probe is AP3704441

- The part number for the EOC is AP3776874

- The part number for the EOC overlay is AP3778486


Read more: http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4431-f10-error-code.html#ixzz156CO7RjB

Nov 12, 2010 | Frigidaire Ovens

1 Answer

Having issues with my temperature gauge. Replaced the thermostat, coolant temperature sensor, and we're still having issues. Thinking it may be temperature gauge sensor, but we replaced it with an older...


has to be either a sensor or a gauge ,reading the wrong resistance ,try taking some old resistors out of an old tv and putting them in line and seeing then if you get it to read right

Aug 09, 2010 | 1987 Chrysler LeBaron

1 Answer

Error code F 10 during broiling. model #790.78649601


The "F10" error code caused by the runaway temperature.

The first thing to check is the resistance across the oven temperature probe (aka oven temperature sensor) terminals at the EOC (electronic oven control) plug.

It suppose to be about 1100 Ohms at the room temperature.

If the resistance at the EOC plug is wrong, then measure the oven temperature probe resistance at the probe plug.

If it's wrong - replace the oven temperature probe. It's better to hardwire it, using a high temperature ceramic wire nuts.

If the readings at the EOC and at the oven temperature probe plug are different - check the wire harness between the oven temperature probe and the EOC.

If there is nothing wrong with the oven temperature probe resistance - replace the EOC.

Aug 01, 2010 | Kenmore 79012 / 79014 / 79019 Gas Kitchen...

2 Answers

Aqualink RS4 Water temperature reads 120 - obviously wrong.


No but this sensor is easy to replace. Just pull the sensor from the pipe by loosening the staniless steel clamp that holds it in the pipe. Then follow the wire back into the Aqualink box and unplug. Get a new one at your local store and replace. It's a common problem and you should be able to do it with ease.

May 21, 2010 | Jandy Aqualink Rs4 One Touch Control...

1 Answer

F 10 code when I try using oven


The "F10" error code caused by the runaway temperature.

The first thing I would check is the resistance across the oven temperature probe (oven temperature sensor) terminals at the EOC (electronic oven control) plug.

It will be about 1100 Ohms at the room temperature.

If the resistance at the EOC plug is wrong, then measure the oven temperature probe resistance at the probe plug.

If it's wrong - replace the oven temperature probe. It's better to hardwire it, using a high temperature ceramic wire nuts.

If the readings at the EOC and at the oven temperature probe plug are different - check the wire harness between the oven temperature probe and the EOC.

If there is nothing wrong with the oven temperature probe resistance - replace the EOC.


Please rate and have a great day:)

May 18, 2009 | Kenmore Ovens

1 Answer

Out side temperature reading


Without having parts to try, this would be difficult to know what the fault is. Inside this unit there is a circuit board, and on the outside there is the exernal temperature sensor.

There are only a few things that can go wrong. There is not much that is servicable unless you can find a spare board, or a spare temperture probe. There is very little posiblity that in any practicality this unit can be serviced at the component level.

I would just go out and buy a new unit.

Jerry G.

Apr 21, 2008 | SkyScan 86742 Digital Atomic Wall Clock

Not finding what you are looking for?
Sta Rite Sta-Rite Max-E-Therm High Effiency - Propane Heater - 333,000 BTU Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sta Rite Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1338 Answers

john h

Level 3 Expert

11097 Answers

steve morris
steve morris

Level 3 Expert

1675 Answers

Are you a Sta Rite Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...