Question about Peachtree Software Peachtree Complete Accounting 2004

1 Answer

Problem using Peachtree2004 on window vista..

When i tried to use the Peachtree 2004 program, there is a box pop out and said "There is another user using the same serial number".. I already tried to restart and reinstall the software but the problem still exist. Is it the Peachtree 2004 does not support window vista or there is another problem?? Please help me to solve it.. thanks.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 96 Answers

Looks like you are using illegal program or... someone has somehow stolen your software key before you noticed. If you are not using this software on your another computer, try to contact software creators http://www.peachtree.com/company/contactus/
and explain the situation

Posted on Jan 23, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

User logon error for 2004


From quoted information from Peachtree's KB system:
Go to Task Manager by pressing the CTRL+ALT+DEL keys and on the Processes tab look for W32MKDE.EXE, click to highlight and choose End Task. If W32MKDE.EXE is not shown, close Task Manager.

Go to Start, Find or Search for conn*.* Be sure you are searching the DATAPATH for these files.

Select all connco and conndp files from your datapath and choose delete.

Since you are using Peachtree First R2004, you will then need to go to Start, Run, and type in PFA110.INI and hit enter. This will open it in Notepad.

Scroll down to the [Options] section and look for the line ShowStartup=No, change this to read ShowStartup=Yes.

Look for the line LastCompanyOpen=[company name] where [company name] would be your last company opened company name. Delete the FULL company name after the equal sign.

Look for the line LastCompanyOpenShort=[company short name] where [company short name] would be your last company opened Folder Name. Delete the company folder name after the equal sign.

Select File from the menu bar and choose Save. Close the ini file.

Open Peachtree and select one of the sample companies. After the sample company opens, select File, Open Company and open your company data.

Mar 28, 2014 | Peachtree Software Peachtree Complete...

Tip

The Windows Vista password cracker for 5 Minutes



Have you ever tried to log into a Windows computer for a few minutes and you finally realize that you forgot the password? There are some ways to crack the password and it doesn't involve reformatting and reinstalling Windows.

Method 1. Use Windows Vista installation disk

Insert Windows Vista installation disk to the CD-ROM drive, restart your computer. Do the settings under CMOS to boot the computer through CD. When the installation interface appears, click "Repair Your Computer" (repair system) in the subsequent pop-up dialog box, select the "Command Prompt". After the system calls the command prompt windows, enter "mmc.exe" and press " Enter", the tne console will be called. Select the file "Add/Remove Administrative Unit", the system will pop up another dialog windows once adain. In the left side of the dialog windows select "local users and groups", and then click " OK" to complete the adding process. After adding is completed, the system returns to the console interface, click "Local users and Groups" om the left side of the windows, then click "User” and the system will list all the users in the right side of the current window. Right-click the user you are to crack, select "Set Password" in the pop-up "Set Password for Users" dialog box, and click "Continue”. The system pops up a window for you to set a new password. At this point, the Vista system does not require you to enter the previous password, but to set a new password directly. After you enter a new password, click “OK”, and the system will pop up a dialog box, indicating the setting is successful.

Method2. Use software programs to recover the password

Well, I’m a computer fun and very interested in computer. Then the above methods are very suitable for me, after several settings will do the job. However, there are still some friends who are not familiar with computer settings. What I said above just doesn’t make sense to them, does it? Well these friends are recommended to use computer software tools. Then you don’t have to touch those annoying terms but to follow the instructions with mouse clicking and pressing keys will be OK. c792349.jpg are highly recommended as they are just of this kind. They can automatically clear the administrator password and easy to operate.
Just take you 5 minutes to solved your problem.

You can view more here:
http://www.lostwindowspassword.com



Hope it can help you, if you still can’t solve your problem, please contact me:
annyyu22@gmail.com

on Apr 14, 2010 | Computers & Internet

2 Answers

How do i stop my windows intaller trying to install symantec antivirus msi file


Step 1:
Stop Windows Installer From Popping Up b> The older a computer gets, the more junk it accumulates. A great number of computers out there don't start up without a thousand things popping up demanding your attention. Windows Installer is one of the more notorious pop-up offenders for Microsoft users. Stopping these pop-ups can prove challenging, however, there is a way.

On your computer's desktop, click on the "Start" tab, typically located on the bottom left of the screen (in Vista it may be the Windows symbol rather than the word "Start"). Now locate and click the program titled "Run." Vista users can locate this program by typing "run" in the search box at the bottom of the "Start" menu. Once "Run" is open, type "MSCONFIG" into the empty box and click "OK." This will open the System Configuration Utility. With the System Configuration Utility open, select the tab labeled "Services." Scroll down the list of services (it may be beneficial to click the "service" column to sort the services alphabetically) until you find the "Windows Installer" program. Now click the check box beside the Windows Installer name and click the "Disable" button at the bottom of the System Configuration. Congratulations, you have stopped "Windows Installer" from popping up!

Feb 06, 2013 | Acer TravelMate 4150LCi Notebook

1 Answer

Can't remove Peachtree Pro 2008 from Vista Machine. It comes up with a fatal error.


This is caused by Internet Protocol (IP) routing resolution in Windows Vista and Windows 7 favoring to push all communication from Peachtree and it's database (Pervasive) through IPv6. Windows Vista, and Windows 7 by default, resolves a computer name into an IPv6 address, however the Pervasive Database is only able to communicate with computers that have IPv4 addresses. There are two methods that resolve this issue. The first method explored in this document is preferred.

Note: This answer contains information about how to modify the registry. It is strongly recommend that you backup the registry before you modify it. You should perform these steps only if you are familiar with editing the Windows Registry. Please contact your local IT Administrator or Computer Consultant for assistance if needed.
Method 1:
Disabling IPv6: To disable the Internet Protocol Version 6 in Windows Vista and Windows 7, follow the steps:
  1. Press the Windows key + R to open a Run prompt. Type REGEDIT in the Open box.
  2. The Registry Editor window appears. Locate and click the following registry subkey:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\
  3. Double-click DisabledComponents to modify the DisabledComponents entry.

    Note: If the DisabledComponents entry is unavailable, you must create it. To do this, follow these steps:

    a. In the Edit menu, point to New, and then click DWORD (32-bit) Value.
    b. Type DisabledComponents, and then press ENTER.
    c. Double-click DisabledComponents.
  4. Type 0ff (that is Number: ZERO Letter: f Letter: f) and then click OK.
  5. Close the Registry Editor window and restart the computer for the changes to take affect.
    Please refer to Article ID 929852 in Microsoft's Knowledge Base for more information regarding this process:
    http://support.microsoft.com/kb/929852

Method 2:

Note: This method is not recommended for laptop users. In some cases, the laptop is used at both work and at home. If the HOSTS file contains the IP address of one location and not the other, this will cause the error, "Peachtree Cannot be started, please reboot" as outlined in Answer 19062.
If you do not want to disable the IPv6 protocol in Windows Vista or Windows 7, follow these steps:
  1. To do this go to the computer that stores the Peachtree data (server).
  2. Press the Windows key + R to open a Run prompt. Type CMD in the Open box.
  3. At the command prompt, type ipconfig. Write down the IPv4 address in the form of ###.###.###.### (example 192.168.1.100).

    21345-1.gif
    Click to Enlarge:

    Figure 1

  4. Close the command screen. Right-click the Computer icon and choose Properties.
  5. Write down the Full Computer Name exactly as it appears including all upper and lower case letters. (example PtreeServer)
  6. Press the Windows key + R, and type C:Windows\System32\drivers\etc in the Open box, click OK.
  7. Double-click the hosts file and choose open with Notepad.
  8. On the first blank line enter the IPv4 address of the server you wrote down in Step 3. Then enter 5 spaces then type the Full Computer Name exactly as it was found in Step 5.

    21345-2.gif
    Click to Enlarge:

    Figure 2

  9. Select File from the main menu and choose Save. Close Notepad.
  10. Open Peachtree.

    Note: If you remove the computer from the network (such as with a laptop), then the Hosts file will need to be changed back to the default in order for Peachtree to work properly.
  11. Press the Windows key + R as stated in Step 2. Type C:\Windows\System32\drivers\etc.
  12. Double-click the hosts file and choose open with Notepad.
  13. Delete the information you entered in Step 8.
  14. Select File from the main menu and choose Save. Close Notepad.

Dec 05, 2010 | Sage Peachtree Pro Accounting 2008 Full...

1 Answer

Immediate access denied


Sir,
These errors are caused by damaged files. Your files need to be repaired. Please visit the Peachtree Data Recovery area for more information. go to the site peachtreedatarecovery.com. If you have multiple user check for privileages download at manufacturer's site.
Thanks Goodluck

Sep 17, 2009 | Peachtree Software Peachtree Complete...

1 Answer

I am denied access to change the accounting period in peachtree


I've seen this before with peachtree. What happens every time you work on an accounting file peachtree locks the contents of the file. Occasionally the software never gets the chance to unlock it. This can happen if the computer shuts down unexpectedly, a file gets corrupted etc. You should find in your installation depending on the version a scan utility that can scan your accounting main file and see if there are problems and correct them. If not next try a re-install of peachtree and run the updates and try opening the file. Finally if not it is time to restore an update you have prior to the problem.

Sep 04, 2009 | Peachtree Software Peachtree Complete...

2 Answers

Customer Sales/Invoice Window


Exiting Tally

Internal error . contact tally solutions

Software Exception c0000005
(Memory access violation)

Feb 04, 2009 | Peachtree Software Peachtree Complete...

1 Answer

Using Peachtree Complete Acctg 2003 w/ Microsoft Vista


may be need to reinstall it again then make update for it

Dec 09, 2008 | Peachtree Software Peachtree Complete...

Not finding what you are looking for?
Peachtree Software Peachtree Complete Accounting 2004 Logo

Related Topics:

257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peachtree Software Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Peachtree Software Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...