I have an Optimum Online remote control for my Optimum cable box. Just got a Samsung HD and need to know what TV code to enter in order to control my new TV with the Optimum remote control. Where can I find this information?

To program your remote to your Samsung HD 3500, follow these steps:

1. Turn on your Samsung HD 3500 and your TV.
2. Press and hold the "TV" button on your remote until all the mode buttons light up.
3. Enter the three-digit code for your TV using the number buttons on your remote. You can find the codes in the user manual for your remote or online.
4. Press the "#" button on your remote. The mode button you selected should blink twice to confirm the code was entered correctly.
5. Test the remote by pressing the "TV" button and seeing if the TV turns off. If it does not, repeat steps 3-4 with a different code until you find one that works.

If you cannot find a code that works for your TV, you can try the automatic code search method:

1. Turn on your Samsung HD 3500 and your TV.
2. Press and hold the "TV" button on your remote until all the mode buttons light up.
3. Press and release the "Power" button on your remote.
4. Press the "Up" button on your remote repeatedly until the TV turns off. This may take several presses.
5. Press the "#" button on your remote to save the code.

Your remote should now be programmed to your Samsung HD 3500.

About 17,100 results (0.72 seconds) Search Results

GE Universal Remote Codes and Instructions ' direcTutor

www.directutor.com/content/ge-universal-remote-instructions
Enter the three or four digit code for your device using the number buttons in the GE Universal Remote. After your code is entered the INDICATOR LIGHT will ...Missing: naxa

Apex Digital TV Converter Box DT250 code ' ManualsOnline ...

tv.manualsonline.com/support/...digital/tv-converter-box/code-1082992
Nov 15, 2008 - Brock Search data: Universal remote control code apex dv converter... 4 I NEED CODE FOR APEX CONVERTER BOX FOR GE UNIVERSAL ...

Trouble programming Universal Remote to a DTV Converter ...

www.fixya.com/.../t2045188-trouble_programming_universal_remote_d...
Apr 21, 2009 - So I'm trying to program my GE Universal Remote to work with my Digital Stream Converter Box but I can't find the codes to do it... If someone ...

Control It All With Universal Remote Codes - Digital Landing '

0241,0208. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts.
http://electronicshelponline.blogspot.com/
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/
Search the site by type in the brand name to your device, in the "Search box at the top right of the display window" to see the set-up codes to your device, with different brand remote controls.

here is want I have found so far, hope they work for us. 10030 10090 10029 10030 10019 10093 11523 11178 10178, this is the same problem I am having Don't know if they will work for. if you have any you have found please posed them on this sight.

Four digit universal remote codes for Samsung brand TVs are:

0105 0077 0076 0109 0007 0009 0004 0005 0085 0172 0942 0358 0012 0015 0080 0104 0106
To know more about 3 digit codes, and the setup proceedings to synchronize a remote control with TV, check this link.
Do a search by entering the brand name to your device by its search box at top right of the display window, because, posts are not arranged in alphabetical order, by brand name at first.

Easy peezy...just press TV on your sky remote,now hold select and the red button until it blinks twice,after it blinks twice enter this code ...1430....it sjould blink twice again,now press standby,it should turn your tv of,if it does press select to save these settings,it should now control your volume too,let me know if this helps

The Remote w/ On Demand buttons, it's the same as the DVD player code 1932. Hit the AUX button, press and hold SETUP until AUX blinks and enter 1932. Press the power button and it should turn off the reciever.

*UNLOCKING VOLUME CONTROL* You must until your AUX volume control in order to use your Comcast remote. To do so, you must select AUX, press and hold SETUP until AUX blinks. Enter 9-9-3 and press Vol - (down). This should unlock your volume control when you select AUX. I'm not sure how to set AUX as your default setting for volume, unless you were to program your AUX device as your TV and vice versa I'd suspect.
Hope this helps!

From GUEST: I found this solution in the manual and will perform this task again to see if I can get the tv will be re-recognized again. Give this a try, too.


Remote will not turn on or shut off the TV.
• You must program the converter box remote in order to control your TV power button.
• To program the remote control:

1. Determine if the TV is a model that can be controlled by the remote control. See "Controllable TV brands" on page 17 in the manual.
2. Turn on the TV.
3. While you press and hold TV POWER on the remote control, press CH ^ or CH v one or more times until the TV turns off. Each time you press one of these buttons, the remote control sends a manufacturer code (between 1 and 45) to the TV.

The answer depends whether its a Comcast DVR Remote or a regular one. The DVR codes are 4 digit -- the others are 5 digit. I got 0060 to work for my DVR remote.

It took me a week to find the right instructions and codes on how to do this so I am posting it everywhere I can to help out folks with the same remote. Pay close attention to the instructions, for instance when programming the remote for TV use make sure you hold the TV button down while you enter the code and then press OK, You also have to hold the TV button down while you use the volume and channel controls or it will just change the VCR channel.
===========================================


A
Turn on TV

Turn on the TV using the Power button on the TV or its Remote.

B
Set TV brand code

A
Press and hold TV.
B
Press MBR SET.
C
Press the Number keys to enter your TV.s brand code.
D
Press OK, and release TV. The TV should turn off.


C
Operate TV

While holding down TV, press one of the following buttons:
POWER 1, TV/VCR, TV CH+/., ^(TV Muting), TV VOL+/.,
and the Number keys.

.
For some brands, you must press ENTER after having pressed the
Number keys to enter a channel number.
TV BRAND CODE TV BRAND CODE
JVC 01, 03
SONY 07
HITACHI 10
SAMSUNG 12
MAGNAVOX 02
SANYO 13
MITSUBISHI 03
SEARS 13
PANASONIC 04, 11
TOSHIBA 08
RCA 05
ZENITH 09
SHARP 06

Cable Box or DBS Receiver Brand Setting

A
Turn on cable box or DBS receiver

Turn on the cable box or DBS receiver using the Power button on
the unit or its Remote.

B
Enter brand code

A
Press and hold CABLE/DBS.
B
Press MBR SET.
C
Press the Number keys to enter your cable box.s (or DBS


receiver.s) brand code.
D
Press OK, and release CABLE/DBS.

C
Operate cable box or DBS receiver

While holding down CABLE/DBS, press one of the following
buttons: POWER 1, TV CH+/., and the Number keys.

.
For some brands, you must press ENTER after having pressed the
Number keys to enter a channel number.
.
To change the cable box.s (or DBS receiver.s) channels, press TV
CH+/–
or the Number keys. (The CH+/–
button can be used to
change the VCR.s channels only.)

CABLE BOX BRAND CODE
ARCHER 01, 05, 17
CABLETENNA 01, 17
CABLEVIEW 15, 16, 17, 21, 25
CITIZEN 15, 16, 17, 21, 25
CURTIS 02
DIAMOND 01, 17
GC BRAND 15, 16, 17, 21, 25
GEMINI 15
GENERAL INSTRUMENTS 01, 04, 06, 11, 12, 15, 28
HAMLIN 10, 18, 23
JASCO 15
JERROLD 01, 04, 06, 11, 12, 15, 28
NOVAVISION 02
OAK 07
PANASONIC 13, 14
PULSER 15, 16, 17, 21, 25
RCA 13, 14
REGAL 10, 18, 23
REMBRANDT 01, 16, 17
SAMSUNG 05, 16, 24
SCIENTIFIC ATLANTA 02
SIGMA 07
SL MARX 05, 16, 17, 24, 25
SPRUCER 13, 14
STARGATE 05, 15, 16, 17, 21, 24, 25
TELEVIEW 05, 16, 24
TOCOM 01, 04, 16
UNIKA 01, 17
UNIVERSAL 16, 17, 25
VIDEOWAY 03, 09, 22
ZENITH 03, 09, 22
DBS RECEIVER BRAND CODE
JVC (DISH Network) 51
ECHOSTAR (DISH Network) 51
SONY (DSS) 41
RCA (DSS) 40

Changing Remote Control Code

This Remote is capable of transmitting two control codes; one set
to respond to A code control signals and another set to respond to
B code control signals. This Remote control is preset to send A
code signals because your VCR is initially set to respond to A code
signals. You can easily modify your VCR and the Remote to
respond to B code signals. When using two JVC VCRs, set two
VCRs and their Remotes to different codes, so that you can
operate these VCRs separately.

A
Set remote control code for Remote

A
Press and hold A/B.
B
Press the Number key .2..
C
Press OK, and release A/B.


.
The Remote now can transmit B code control signals.
B
Check remote control code for VCR

Press and hold 4
on the VCR for more than 5 seconds while the
VCR is turned off. The code currently set appears on the display
panel.

C
Change code for VCR

Press any key on the Remote. The VCR now responds to B code
control signals.

.
To set the Remote and the VCR back to A code control signals,
repeat the same procedure as shown above except pressing the
Number key .1”
in step B
of 1
1111.
To control two VCRs with the same Remote

You can control two JVC VCRs by switching the remote control
code for the Remote between A and B (.
step A
AAAA), keeping two
VCRs to different control codes.

.
To change only the remote control code for the Remote, DO
NOT perform steps B
BBBBand C
CCCC.
—