Question about Linksys WAG200G Router
When the internet light is red it means that the connection to the ISP failed.
To check the settings on your gateway, use your internet browser and type 192.168.1.1 in the address bar.
By default, the username and password is admin.
If you have a cable internet connection:
Under the setup page, select Obtain IP address automatically (DHCP) for the internet connection type (encapsulation). Save the settings. Then go the status tab and check if there is an WAN IP address. If none, power cycle the modem.
If you have DSL connection with PPPoE:
Under the setup page> Internet connection type (encapsulation) select RFC 2516 PPPoE.
Multiplexing should be VC.
Under PPPoE settings, you need to enter the username and password that your ISP gave you. Then save the settings. Go to the status tab,
click the connect button. You should be able to get online.
Posted on Feb 02, 2010
Tips for a great answer:
Oct 15, 2010 | Linksys WAG200G Router
Feb 20, 2010 | Linksys WAG200G Router
Jan 06, 2010 | Linksys WAG200G Router
Sep 15, 2009 | Actiontec GT704WG Wireless Router...
Aug 07, 2009 | Linksys WAG200G Router
Jun 12, 2009 | Linksys WAG200G Router
May 20, 2009 | Linksys WAG200G Router
416 people viewed this question
Usually answered in minutes!