Question about Nautilus Ntr 800 Treadmill Lift Motor

Open Question

Nautilus ntr 800 treadmill err 5 - Nautilus Ntr 800 Treadmill Lift Motor

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 11 Answers

SOURCE: Treadmill belt adjustment

There are two bolts on the back of the treadmill. Turn the right side clockwise to make the belt go left, turn the left side clockwise to make it go right. Never tighten more than 1/2 turn at a time, and do this while machine runs at 2-3 mph. Belt should be just tight enough to not slip. If your belt is really tight and it still slips you have other problems.

Posted on Feb 09, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I find service in Europe


Customer Care Number: +1-800-628-8458, +1-800-605-3369
See More Detail Email Address: csnls@nautilus.com
Contact Person:
Address: 17750 Southeast 6th Way Vancouver, Washington 98683, United States
Website: www.nautilusinc.com

Contact Nautilus Inc

Nov 02, 2015 | Nautilus T914 Commercial Series Treadmill

1 Answer

Bowflew series 5 belt slip


Could be a loose tread-belt, loose drive belt or faulty front roller

Feb 14, 2014 | Nautilus Bowflex series 5 treadmill

1 Answer

Nautilus NTR 800.6 Treadmill. I can go up on speed and incline but not back down?


please RUN the software calibration, for easy diagnose, troubleshooting, and fix it.
Test the speed sensor, for open or faulty, clean it, and tight the connector very well. see the diagram
Happy New Year. God bless you
1_2_2013_1_25_28_am.gif

Jan 01, 2013 | Exercise & Fitness

1 Answer

Lubricant belt zoom


go to www.fitnessrepairparts.com or www.treadmilldoctor.com and buy it the LUBRICANT belt.

God bless you

Jul 21, 2012 | Nautilus Ntr 800 Treadmill Lift Motor

1 Answer

I have a Precor 9.33i Treadmill. It works perfectly until I start to walk/run on it and then it shuts down. What is causing this?


LUBE THE deck belt, this happen because the system protect the electronic system, with shut down.
2= LUBE THE ROLLERS BEARINGS TOO
3= measure the input voltage motor, if there are the motor need repair
4= measure the output voltage board, for input voltage motor, if there are NOT the boar is faulty.
see the block d
God bless you
7_20_2012_9_39_47_am.gif

Jul 19, 2012 | Nautilus Ntr 800 Treadmill Lift Motor

1 Answer

Shwinn 220 won't prdal


you can call Treadmill Doctor and they will help at 800-750-4766 I am also attaching the manual.

http://download.nautilus.com/supportdocs/OM/Schwinn/SCH.120.220.OM.EN.FR.pdf

Jul 04, 2012 | Schwinn 220 Recumbent Bike

1 Answer

Nautilus NTR 800 fuse kick out when I start to run


See my personal TIPS for HELP , and see the diagram.

there varios reason. a) the main switch b) some wires touching the carcase c) ground defective d) some components in the power supply in short.
Try to RUN the software calibration for diagnose and troubleshooting.

You must shure to put the correct size amp, and voltage for the fuse, and the same type!.May be you need assistance from some service tech

sincerely. God bless you

Apr 28, 2012 | Exercise & Fitness

1 Answer

Treadmill NTR 800 Error 0665


see you instruction manual and go to section troubleshooting for proceed.

If you do not have i.manual go for free download ;www.fitness.manualsonline.com or www. iconservice. com

Whatever the error code mean, please lube your deck belt, test the drive belt, and see the motor if there are running.

sincerely. God bless you.

Apr 26, 2012 | Exercise & Fitness

1 Answer

My bowflex is showing "err l5" what is wrong with it?


This error indicate that the console is unable to deter mine the speed of the belts. Potential parts associated with this are the Speed Sensor, MCB, Motor, I/O cables, and Upper Electronics. Call Nautilus Service Dept 1-800-628-8458

Apr 14, 2010 | Bowflex Treadclimber

2 Answers

Treadmill belt adjustment


There are two bolts on the back of the treadmill. Turn the right side clockwise to make the belt go left, turn the left side clockwise to make it go right. Never tighten more than 1/2 turn at a time, and do this while machine runs at 2-3 mph. Belt should be just tight enough to not slip. If your belt is really tight and it still slips you have other problems.

Jan 03, 2010 | Nautilus Exercise & Fitness

Not finding what you are looking for?
Nautilus Ntr 800 Treadmill Lift Motor Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nautilus Exercise & Fitness Experts

David Payne
David Payne

Level 3 Expert

14161 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Techmotionusa.com
Techmotionusa.com

Level 2 Expert

161 Answers

Are you a Nautilus Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...