Question about Jenn-Air SVE47100 Slide-In Electric Kitchen Range

1 Answer

I just got this Jenn Air...bought it 2nd hand in a store..how old is it?

We want to know how old our Jenn-Air SVE47100 range is, and any known problems with it, we just bought 2nd hand. Can not find hardly any information on line about this paticular model..can't even find any SVE models of Jenn Air. Does anyone know the age and any known problems with this model? thank you

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 944 Answers

Have a look through this lot, there are a few problems for your model discussed, but nothing that sounds like a known problem for the model; http://www.applianceblog.com/mainforums/archive/index.php/f-64.html This link has a good description of a common problem with the model (temperature too low compared to the digital readout) and it's solution; http://applianceguru.com/forum1/955.html this link has a good collection of reviews on the stove - people were still buying them new in '98, couldn't find exactly when they started selling them; http://www.epinions.com/hmgd-Ranges-Jenn-Electric-Jenn-Air_Slide-In_30-Inch_Electric_Range_SVE47100/display_~reviews If you have any problems and need parts, there are still many companies offering them online for this model - just type "jenn air SVE47100 parts" into google and you will get a good selection. Sorry I had no luck finding a user manual online, free or otherwise, you could try contacting jenn air direct to see if they could send you one; http://www.jennair.com/content.jsp?name=contact_us Hope this helps :)

Posted on Jul 07, 2007

  • Nigel Ridehalgh
    Nigel Ridehalgh Jul 07, 2007

    PS check through the product page on fixya also - there are several postings for the same model;
    http://www.fixya.com/support/p60249-jenn...

    :)

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you remove front panel on jenn-air sve47100


Make sure to dsc stove or be careful ... Open the oven door and look under the panel, tools that you will need are phillips screw driver and a 5 sided bolt head tool .... there's 5 screws and 2 of the other tool.

Dec 07, 2011 | Jenn-Air SVE47100 Slide-In Electric...

1 Answer

Hi I have a jenn-air 30inch slide in down draft range..it is about 15 yrs old..the oven quit working..the top works..and ideas


need a volt meater and check votage to heating elament ,most of the time food gets spilled on them and they go out ,you can find the parts easy enough

Dec 05, 2011 | Jenn-Air SVE47100 Slide-In Electric...

1 Answer

Jenn-Air SVE47100 Oven Won't Heat


are you still getting power to the oven? breaker ok? there may also be a fusible link somewhere on the circuit

Nov 21, 2009 | Jenn-Air SVE47100 Slide-In Electric...

1 Answer

F1 fault code? Jenn-Air SVE47100


HI. This is concerning the relay board that is installed in your unit. I would recommend to inspect the entire wiring harness that is linking the relay board to the elements, and other power component's. If the harness is ok, and connected tightly, and correctly, this will confirm that the relay board has failed. It must be replaced in the case. Be sure to inspect all wiring harness connections for corrosion before you replace the board. This could be as simple as a failed connection.

PRB Part Number is #71002144




Nov 14, 2009 | Jenn-Air SVE47100 Slide-In Electric...

1 Answer

My Jenn-Air SVE47100 slide in electric range does


Obviously it does not work fine. The thermostat sensor or the stat itself could be an issue. Can you see the sensor 'bulb'? Clean it with oven degreaser and steelwool. What is the temp in the oven with a 'oven thermometer'? Is this consistent with the oven readout?

If you need further help, I’m available over the phone at https://www.6ya.com/expert/craig_3fa289bf857b1a3c

Sep 24, 2009 | Jenn-Air SVE47100 Slide-In Electric...

1 Answer

Jenn-air cooktop drip jar


Search on-line for used appliance parts. There are some good ones out there that have the older JennAir parts in good quality used. If I can help further, I am here.

Eric Campion

Mar 03, 2009 | Jenn-Air SVE47100 Slide-In Electric...

1 Answer

F1 Failure , need to know how to advance the clean timer to get unit to unlock


Hello welcome to fixya,


Below I pasted the fault codes for the two different years of this range.

To diagnose these difference you will need a hands on tech !
this is not an easy thing to determine

JENN AIR

Range/Stove/Oven Fault Codes
Failure
Code
Condition Check/Repair F1 Defective touch pad or membrane Replace touch pad or membrane (this problem is usually the touch pad)

JENN-AIR
'Newer Style' Range/Stove/Oven Fault Codes

Failure
Code
Condition Check/Repair F1 Power to element relay energized during time of day display Wiring harness shorted or change power relay board (PRB)

Note: for double ovens, change second oven board

Dec 08, 2008 | Jenn-Air SVE47100 Slide-In Electric...

1 Answer

F9 code


says F9, is a problem with door lock saftey circuit. replace power relay board

Mar 01, 2008 | Jenn-Air SVE47100 Slide-In Electric...

2 Answers

Trouble connecting downdraft fan


Don't have an installation manual anymore either. What I remember from ours (and from what I can see from the front) is that the fan connects near where the main power cord attaches to the range itself. Probably not much help, but if I can find the install manual, I'll try to provide more specifics.

Sep 10, 2007 | Jenn-Air SVE47100 Slide-In Electric...

Not finding what you are looking for?
Jenn-Air SVE47100 Slide-In Electric Kitchen Range Logo

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Kitchen Ranges Experts

Sal De

Level 3 Expert

2699 Answers

Craig Butler
Craig Butler

Level 3 Expert

1723 Answers

Paul Carew

Level 3 Expert

3336 Answers

Are you a Jenn-Air Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...