Question about NetGear WGR614 Wireless Router

2 Answers

I need to recover my network code

I am trying to recover my internet code to connect a 2nd pc. When i type in www.192.168.0.1 i am redirected to google search engine. Can you help?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 104 Answers

Hi...leave out the www, so you type in http://192.168.0.1

If you still don't reach your router login page, for Netgear products you can try www.routerlogin.net (or sometimes .com)

If this does not work, please come back to Fixya

Posted on Jan 23, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,214 Answers

Are you typing the IP into the URL bar at the top of your browser screen? If not, that is where you need to type it.

If you are, then maybe your router IP was changed to something else. YOu will need to determine the new IP, or do a total reset on the router and reconfigure all the security settings.

Another thing you can do is export your network profile on the computer that is connected to the internet. You can then move that file to the new computer, or, you can just open the file up and look at the settings. That way, you don't need to get into your router.

Posted on Jan 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Device has 5 bar conection on wifi on PC but won't connect to internet


I'm not exactly sure whether you are connected to the PC but can't see the internet or whether you are not connected to the PC. So I'll explain the difference and you can decide.

When you attempt to connect a device to a wifi network, the device will do a search for available networks. The networks in range will display, showing their SSDI (name), signal strength, and security status. This is not yet a connection, only a detection. To connect to the network, you need to select the one you wish to join and send a connection request. Unless the wifi network in question is a free hot-spot or is unsecured (neither a good idea to use), then the next thing that will come up is a passcode/security code popup. Here you must enter the passcode/security code that the wifi network is assigned in order to connect. Without it, you will not be able to connect or access the network or internet. There is also the issue of security type. Older routers and devices used a code system called WEP. Newer router use WPA/WPA2 encryption techniques. our device must support the security type the router is using or you will not be able to connect.

Nov 26, 2015 | Routers

1 Answer

When trying to login to www mywifiext net I get redirected to netgear


I had the same problem,my fix:
Connect your computer/laptop to your internet by a cable.
Connect to your extender via wireless network.
Then open a browser and go to www.mywifiext.net
Now it should load the page without redirecting.

I know this is a old post,but it's the top google link when searching for this problem. If someone would have told me, it would have saved me a lot of time and rage!

May 13, 2013 | Routers

1 Answer

I can't get online to google or anything because the laptop will not come out of the offline.


If you are on a wireless network with a router, power cycle all your equipment to get it back in sync with each other.

1. Turn off the power to your router( 1st) , your modem (2nd) and pc (3rd). in this order. Wait a few min.

2. Take out the ethernet cable from the router (until your modem reacquires a signal to the internet) and if the pc is connected to the router unplug the Ethernet cable from the back of the pc.

3. Turn on the power to your router wait for all the lights to come back up. Then turn on your modem and wait for all the lights to come back up and reacquire a signal. Once all the lights are on the modem, plug the ethernet cable back into the Internet jack of your router.

4. Turn on your laptop. After Windows loads and you get to your desktop, plug the Ethernet cable in to the back of the pc( if you connect wired) or try to connect to your wireless network.

5. Then open your browser and type in this web address:

http://www.purple.com


if a purple page comes up-You are connected to the Internet.

Apr 21, 2011 | Routers

1 Answer

Cannot get on the puter its asking for network user name password and domain


As long as you're trying to access your own internet/router you can easily find both pieces of information.
Luckily each brand of router has it's own solution to recovering a lost network key/password.
First, specify the brand router you own. I will provide information on two common brand routers below:
Linksys:
In your web browser (even if you cannot connect) type in exactly: http://192.168.1.1. This is your router's LAN address and will give you access to a host of control screens
Then click the "Security" tab which will reveal your network key/codes.
Your network user name/password should be shown in this tab!
Belkin:
Connect an Ethernet cable to the network port of any network computer and plug the other end into an available port on the back of the router.
Open your internet Browser
Check your router manual/instruction manual/router itself for the AP Address of router. It is usually 192.168.2.1
Input this Address into your internet browser (you do not need connection for this to work).
Go to the security tab after loading this page. Your username/password should be listed there!
Best of luck.

.


Mar 15, 2011 | Routers

2 Answers

I can't find the password for my network, so do I need to reset the password? Once I get the password, how do I then get my laptop on the network?


There is a great article at Working with Windows Wireless Networks
If you need more help post back! Thumbs and testimonial are welcome!

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

Jan 30, 2011 | NetGear WGR614 Wireless Router

1 Answer

DGN2000 router problem. I have 2 pc connected on the router and only the main one has access to the internet. Am i doing something wrong with the settings or does my router has a problem? Is it true that...


I'm not aware of any problem with the DGN2000 that only lets you connect 1 computer (If it was I dont think they would sell many and EVERYBODY would know about it)

Anyway - try swapping the network leads over (remember which port is the "live" one) does the other PC now have internet access and the 1st one not?

if the 2nd pc DOES have internet access the yes you have a suspect router.
if the 1st computer DOESN'T have Internet access you have suspect router.

if the 2nd pc DOESN't have internet access but the 1st pc DOES - then the problem is something on the 2nd pc.

Hope this helps.

Jan 30, 2011 | NetGear DGN2000-100NAS Router

1 Answer

Wanting to connect 2nd computer to internet, have router


If it is by wirless you will need to adjust the wirless adapter setings by going to your network conecsions click on the wirless conecsion and confiqir it to use stronger setings it should have a descripsion for all stings. I hope this will help you. Also do not forget to vote.

Jan 17, 2009 | Gateway Cable/DSL Router - 4Port [ Belkin...

1 Answer

Linksys wrt54gs Set up


1. Unplug your cable/dsl modem.
2. Unplug your Router
3. Plug in your modem ... wait for it to come completely up.
4. Plug in your WRT54G Router and wait for it to come up.
5. Go to your 1st PC and get into Command Prompt. Type is ipconfig /release .... then type ipconfig /renew
6. Check for internet connectivity.
Repeat step 5 for for your second PC.

If your second PC is wireless go into the wireless config utility and search for access points. Connect to your Access point and check for connectivity.

If you still have no internet. Press the reset button on the back of the router for 45 seconds while it is powered on. Repeat steps 5 and 6.

Be sure to lock down your wireless SSID so neighbors and people passing by are unable to connect to your access point and do bad things on your network.

Jun 10, 2008 | Linksys Wireless-G WRT54G Router

2 Answers

Linksys wireless card with ASUS WL520g Router - encryption error


you have changed the network key, but why update the username and password as it should always be the same which is the one supplied to you to connect to your service providers connection, assuming you mean the security key, go to your pc and search for your network again, as it will be trying to connect to a non existant unsecured router. When it searches and finds the networks in your area, choose yours click connect and the enter password window should pop up to be entered. Go to your browser and clear old temp files and cookies in tools, internet options, restart pc and you should assuming you have put the correct settings in be online.

Sep 13, 2007 | ASUS WIRELESS ROUTER |WL-520G - RT...

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Routers Experts

Barry37

Level 1 Expert

31 Answers

MrNutsy

Level 1 Expert

36 Answers

Phillip Whisenant
Phillip Whisenant

Level 2 Expert

120 Answers

Are you a NetGear Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...