Question about Directv D11 DTV Receiver

2 Answers

Remote contol will not work

I've tryed all the remote codes suggested by directtv but none seem to work. I had a working remote control on my other tv but tryed to enter codes in that box to use on my other box but now they both dont work.
Is there a special code or programing technique i can use

They are now all messed up Help

Box Model # d11
Remote # rc23

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 56 Answers

Http://www.directv.com/DTVAPP/global/contentPageIF.jsp?assetId=P4380052#h:1020.989


directv remotes are not guaranteed to work w/ all types of TV's. when programming remote to TV, make sure you are holding down MUTE and SELECT both at the same time for about 4-5 seconds. until it blinks twice at the top of the remote. also the slide switch must be under the "tv" mode on the right hand side. the website i provided is by directv, and has a list of their codes for the brand of tv that you have.

if you are trying to program a remote to a directv box, and none of the codes are working for the directv box, contact directv to have them send you a new remote.

Posted on Apr 05, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 77 Answers

Hey, I had the same problem with getting my D11 to work with my Vizio. Heres how I got it to work. Slide the turn tv on. Slide Remote to TV setting. Press and hold Mute & Select until light under tv mode flashes twice. Key in 991. Wait for flash then key in 1. Press power button once. Then press channel up until the tv responds. As soon as it responds press select to save the code. Note this process can take a while but dont get going to fast. if you rush pushing the channel up button sometimes the tv will respond but you are going so fast that you skip over it to the next code. if that happens then you have to start the proccess all over again. If you need these instructions again you can access them from your D11 go to menu/remote/tv/pick a random brand/then press code search(in lower right hand side of screen and it will give you the same directions I have just given. Good Luck, Brian

Posted on Jun 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

What is the sky remote control for Samsung


Hi

Samsung
4 digits: 0060
3 digits: 065, 584, 037, 245, 476, 398, 516, 292, 318,037

Samsung (6000 series)
4 digits: 1340

As you used 0060 and it didnt respond please try to programma with the other 3 didgit codes.

If still you cannot programme it follow the below instruction:

1. To control your TV firstly switch on the TV set, point the Sky remote at the TV,
2. Press the "TV" button on the Sky remote, then press and hold the "Select" and "Red" buttons together until the red light at the top of the Sky remote control flashes twice.
3. Continue with this process by continuously pressing "TV" then "Standby" then "TV" then "Standby" etc until the TV set switches off. This will start using the inbuilt codes to programme the remote.

Thanx

Jul 27, 2010 | Samsung TV Receivers & DVRs

2 Answers

Can't program rc65 directv remote to control hr21-700 receiver


I believe the codes 00001 and 00002 are valid for all DirectTV receivers.

Instructions for entering the codes are here.
Instructions for searching for the proper code if those two don't work, or for other devices, are here.
If you'd like a digital manual for your RC65, click here.

I hope that helps.

Jan 25, 2010 | Directv HR21-700 DTV Receiver

1 Answer

Need to program directtv remote to work volume on rca tv need codes for tv


You need to go in to menu and select setup. Than select remote set up. Follow the instructions on screen.

Jan 02, 2010 | RCA R10 DIRECTV

1 Answer

Remote control not working


I presume you`ve checked batteies,nothing in the way etc.
The best way is to ring /email your tv company see if they have a code.

If it doesn`t work you could buy a universal remote control. read the below.
http://www.answerbag.com/articles/How-Does-a-Replacement-Remote-Control-Work/89114f3e-a2e0-b409-52ae-8384013312dc

Nov 02, 2009 | TV Receivers & DVRs

3 Answers

Remote will not work


you would need to contact directv at 800-531-5000 and if programming it did not work, and setting it to default did not work, you may need a new remote. remote will cost about $15 unless you have the protection plan then it should be free depending on some circumstances.

Mar 31, 2009 | RCA DRD430RG DirecTV DTV Receiver

1 Answer

Direct TV HD Receiver/Recorder codes


Check the Innovage manual for the automatic code search. If it works, you still may not have full control of your HR20. Try to program your Directv remote to operate your components

Jul 07, 2008 | Directv Plus DVR DTV Receiver / 100-Hours...

1 Answer

One for all codes


Hi,

Does anyone know the code for a Matsui 1440A TV (quite old!!!!) with a 2160 original remote, for the one for all 6210 remote. Tried them all on the oneforall site but none seem to work. Mail me at ali2972@yahoo.co.uk if you can help

Many thanks

Ali

Jun 06, 2008 | TV Receivers & DVRs

1 Answer

Remote control code to program for directv receiver


i have a ton of codes i need your model# of your Directtv Receiver.

Feb 05, 2008 | RCA DRD430RG DirecTV DTV Receiver

2 Answers

Code for Verizon FIOS remote Control


Code 1292 worked like a charm for me!
Vizio SV421XVT

Dec 11, 2007 | TV Receivers & DVRs

Not finding what you are looking for?
Directv D11 DTV Receiver Logo

737 people viewed this question

Ask a Question

Usually answered in minutes!

Top Directv TV Receivers & DVRs Experts

Ed

Level 1 Expert

6 Answers

Andy Fraser
Andy Fraser

Level 2 Expert

129 Answers

yadayada
yadayada

Level 3 Expert

60775 Answers

Are you a Directv TV Receiver and DVR Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...