Question about HP PhotoSmart 7260 InkJet Printer

2 Answers

Need a power supply/cable for HP7260

The printer was loaned out ot a charity and returned w/o a power supply cable. A quick search of the internet revealed no source and HP has discontinues this model. The power supply is one of the small units; i.e. the transformer plugs directly into the 110 wall receptical. The connection to the computer has small three prong female connectors and about .75" wide x .25 tall. Where can I find a source for a power supply for an HP7260.

Posted by on

  • Anonymous May 24, 2009

    need a power supply cable

  • Juanita Vega
    Juanita Vega May 11, 2010

    you can get one at ebay

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Go to this website http://www.sparepartswarehouse.com/HP,Photosmart,7000-Series,Q3005A,Printer,Power-Cords.aspx

Posted on Apr 19, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,179 Answers

Here is one for you: http://www.superwarehouse.com/HP_Power_Cable_IEC_320/340653-001/p/624392
Hope this helps & please remember to rate my answer. Thanks.

Posted on Jan 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HP DeskJet 3745 Printer , My Printer Cant Turn ON , Tested PW Adapter OK , How To FIx It .....Help Me!!!


Some products require time to turn on. These products might or might not give feedback in the form of blinking light(s). Wait a minute for the power light to turn on before proceeding to the solution.If your product does not respond when you try to print, press any button on the product to wake it from power save mode. Wait for the product to initialize, and then try to print again.
Try the following solutions in the order presented to resolve the issue. When one of the solutions resolves the issue, there is no need to continue troubleshooting.Solution one: Press and quickly release the Power button Press and quickly release the Power button (c01602202.gif ) to start a Power On/Off cycle. Do not hold down the button Figure 1: Press and quickly release the Power button If you press and hold the Power button too long, the product might turn on and then off without restarting. If this happens, press and quickly release the Power button (c01602202.gif ) again.If these steps resolved the issue , you do not need to continue troubleshooting.If the issue persists , continue to the next solution Solution two: Check the electrical connections and outlet Unplug the power cord from the electrical outlet, or the power strip or surge suppressor Carefully inspect the power cord for visible damage.If the power cord or power module shows any damage, contact HP to replace the power supply. Disconnect the power supply from the rear of the product.Wait at least 30 seconds, and then plug the disconnected power supply into an electrical outlet. Do not use a power strip or surge suppressor.If the green light (LED) on the power supply does not light up, contact HP to replace the power supply.Reconnect the power module to the product. Press and quickly release the Power button (c01602202.gif ) to turn the product on.If the product still does not turn on, connect the product to an electrical outlet in another room, and then quickly press and release the Power button (c01602202.gif ) to turn the product on.If the product turns on , the electrical outlet in the original room caused the issue.If the product still does not turn on , continue with the next solution.Solution three: Check the USB cable Disconnect the USB cable from the rear of the product.Figure 2: Disconnect the USB cable from the HP product Press the Power button (c01602202.gif ) to turn on the product.If the product turns on with the USB cable disconnected , replace the USB cable If the product still does not turn on , continue to the next solution.Solution four: Check the battery If your HP product has a battery, follow these steps:Check the battery light. If the light is red,recharge the battery.If the battery light is still red after recharge, replace the battery.Figure 3: Removing a battery (example only) 1 - Slide the battery release slider in the direction of the arrow 2 - Remove the battery Instructions for recharging and replacing a battery are available on the HP Web site.Solution five: Replace the power supply If you have completed all of the troubleshooting steps and are still experiencing a problem, contact HP to replace the power supply for your product Solution six: Service the product If you have completed all the preceding steps and are still experiencing a problem, service the product

Oct 03, 2011 | HP DeskJet 3745 Printer

1 Answer

900.80 rip error


Step 1: Turn off the printer for 30 seconds or longer to clear its memory
Do not power the printer off and on too quickly. Doing so can cause a power issue and
create this type of issue.

Step 2: While the MFP is off, clear any pending print jobs from the computer or the network queue.
This will prevent any corrupted print jobs from being re-sent to the MFP when it is powered
back on.

Step 3: Did the error message return?

Yes: If the 900.80 error returns when the printer is powered up or when you try to print again,
continue with Step 4 or go to Contacting Lexmark.
No: If the 900.80 error does not appear on the printer screen, use the printer operator panel to
print a menu settings page. If the error does not return, continue using the printer.

Step 4: Power the MFP off and disconnect all communication cables (i.e., the parallel, Ethernet,
and USB cables). The only cable that should be connected to the printer at this time is the
power cord. There might be a problem with either the printer, a communication cable, or the
print job itself. If possible, connect the printer's power cord directly into a grounded wall
outlet.

Step 5: Power on the MFP again.
Did the error message return?

Yes: A service call may be required. Please contact Lexmark Technical Support or a

local authorized service center in your area for additional assistance.

Replace scanner control card (SCC) first, if no fix replace FB CCD Asm


Parts number
40X2194 - SCANNER CONTROL CARD
40X2193 - FLATBED CCD ASM


No: If the 900.80 error does not appear on the printer screen, use the printer operator panel

to print a menu settings page. If the error does not return, continue using the printer.

Jun 18, 2011 | Lexmark X782e Laser Printer

2 Answers

My Hp 7310 will not turn on, we purchased a new power source an when it was plugged in, there was a quick pop and it would not work


Pop could have been internal power source exploding. If the printer is new or under warranty, return it. If it's old, you're probably better off buying a new one.

Mar 02, 2011 | HP OfficeJet 7310 All-In-One InkJet...

1 Answer

My printer will not turn on


First, try pressing and quickly releasing the Power button to start a Power On/Off cycle. Do not hold down the button. If this resolves the problem your done; if not continue on.

Inspect the power cord for visible damage; if damaged will need to contact HP to replace.

Disconnect the power supply (power module and cord) from the power source (wall socket) and the printer.

Test the power source, wall socket with or without your power bar or surge protector in place, with a small appliance you know works to confirm you have power. You may want to test the wall socket first and then test the power bar, etc. to make sure each component is not the problem.

If the appliance works then need to investigate the power supply. If the small appliance does not work you may need to check your electrical panel for a tripped breaker and possibly consult an electrician to check your electrical wiring.

To test the power supply plug in to the working power source; if the green light on the power supply does not light up you will need to contact HP to replace the power supply.

If the green light on the power supply lights up; reconnect to the printer.

Press and quickly release the Power button to turn the printer on. if the printer does not turn on you will need to check the USB cable.

Disconnect the USB cable from the printer.

Press the Power button to turn on the printer; if the printer turns on you will need to replace the USB cable.

If printer does not turn on, check the battery if your printer has one. A red light means the battery requires recharging; if it is still red after recharging, replace the battery.

If none of these steps resolve your issue before replacing the power supply try plugging the power supply directly in to a different working wall socket with no power bar or surge suppressor.; Press the power button.

If still no power to the printer you need to replace the power supply.




I

Dec 22, 2010 | HP Photosmart 8050 InkJet Printer

1 Answer

I need to connect my HP 4450 printer to a usb port on my computer. The parallel port on the printer is c-size


you'll definitely need to use an adapter/cable to convert/connect USB to parallel or vice-versa. You can do a quick search on the internet or even check with your computer /printer store/dealer for it.

Sep 08, 2010 | HP Color LaserJet 4550 Printer

3 Answers

My printer will not turn on. We had a storm


Solution one: Press and quickly release the Power button Press and quickly release the Power button (c01602202.gif ) to start a Power On/Off cycle. Do not hold down the button . Figure 1: Press and quickly release the Power buttonc01896071.gif c01733891.gif If you press and hold the Power button too long, the product might turn on and then off without restarting. If this happens, press and quickly release the Power button (c01602202.gif ) again.
  • If these steps resolved the issue , you do not need to continue troubleshooting.
  • If the issue persists , continue to the next solution.
Solution two: Check the electrical connections and outlet
  1. Unplug the power cord from the electrical outlet, or the power strip or surge suppressor. Power module Power cord c00745315.gif c00057913.jpg
    NOTE: The power cord detaches from the power module. The term power supply refers to both the power module and the power cord.
  2. Carefully inspect the power cord for visible damage. c01733891.gif If the power cord or power module shows any damage, contact HP to replace the power supply.
  3. Disconnect the power supply from the back of the product.
  4. Wait at least 30 seconds, and then plug the disconnected power supply into an electrical outlet. Do not use a power strip or surge suppressor. c01733891.gif If the green light (LED) on the power supply does not light up, contact HP to replace the power supply.
  5. Reconnect the power module to the product.
  6. Press and quickly release the Power button (c01602202.gif ) to turn the product on.
  7. If the product still does not turn on, connect the product to an electrical outlet in another room, and then quickly press and release the Power button (c01602202.gif ) to turn on the product.
    • If the product turns on , the electrical outlet in the original room caused the issue.
    • If the product still does not turn on , continue with the next solution.
Solution three: Check the USB cable
  1. Disconnect the USB cable from the back of the product. Figure 2: Disconnect the USB cable from the HP productc01896072.gif
  2. Press the Power button (c01602202.gif ) to turn on the product.
    • If the product turns on with the USB cable disconnected , replace the USB cable.
    • If the product still does not turn on , continue to the next solution.
Solution four: Check the batteryIf your HP product has a battery, follow these steps:
  1. Check the battery light. If the light is red, recharge the battery.
  2. If the battery light is still red after recharge, replace the battery. Figure 3: Removing a battery (example only)c01468528.jpg 1 - Slide the battery release slider in the direction of the arrow 2 - Remove the battery
Instructions for recharging and replacing a battery are available on the HP Web site. Solution five: Replace the power supplyIf you have completed all of the troubleshooting steps and are still experiencing a problem, contact HP to replace the power supply for your product. Solution six: Service the printer If you have completed all the steps listed above and are still experiencing a problem, service the product.

Nov 25, 2009 | HP OfficeJet 7410 All-In-One InkJet...

1 Answer

My printer no connection cable and also power cable what is price for two materials??


You will need to search on the internet or go to your local computer parts shop.
You will need a USB printer cable (approx $10) and a AC power adapter for the HP PSC1210. This will cost about $20-35 depending on which style you chose.

check http://www.sparepartswarehouse.com/HP,PSC,1210,Printer,Power-Supply.aspx

Nov 12, 2009 | HP PSC 1210 All-In-One InkJet Printer

1 Answer

Hey, my dell all in one printer 810 will not power on at all. I have measured the traffo into the printer and it reads 30vDV so it has power but will not start


Hi
Disconnect the unit completely from the AC outlet for 5 or 10 minutes, then plug it back again.It will works.
Also I suspect it may be a loose power switch, or a problem with the power supply.
If it is a USB printer that derives power through the USB cable and not from a seperate power cable, then check the USB cable. That may be the source of the problem if the cable is bad.
Try the following solutions in the order presented to resolve the issue...

Solution one: Press and quickly release the Power button
Press and quickly release the Power button ( ) to start a Power On/Off cycle. Do not hold down the button .
Press and quickly release the Power button
If you press and hold the Power button too long, the product might turn on and then off without restarting. If this happens, press and quickly release the Power button ( ) again.
If these steps resolved the issue , you do not need to continue troubleshooting.
If the issue persists , continue to the next solution.
Solution two: Check the electrical connections and outlet
Unplug the power cord from the electrical outlet, or the power strip or surge suppressor.
NOTE: The power cord detaches from the power module. The term power supply refers to both the power module and the power cord.
Carefully inspect the power cord for visible damage.
If the power cord or power module shows any damage, contact HP to replace the power supply.
Disconnect the power supply from the back of the product.
Wait at least 30 seconds, and then plug the disconnected power supply into an electrical outlet. Do not use a power strip or surge suppressor.
If the green light (LED) on the power supply does not light up, contact HP to replace the power supply.
Reconnect the power module to the product.
Press and quickly release the Power button ( ) to turn the product on.
If the product still does not turn on, connect the product to an electrical outlet in another room, and then quickly press and release the Power button ( ) to turn on the product.
If the product turns on , the electrical outlet in the original room caused the issue.
If the product still does not turn on , continue with the next solution.
Solution three: Check the USB cable
Disconnect the USB cable from the back of the product.
http://h10025.www1.hp.com/ewfrf-JAVA/Doc/images/c01896072.gif( chek the figure)
Press the Power button ( ) to turn on the product.
If the product turns on with the USB cable disconnected , replace the USB cable.
If the product still does not turn on , continue to the next solution.
Solution four: Check the battery
If your HP product has a battery, follow these steps:
Check the battery light. If the light is red, recharge the battery.
If the battery light is still red after recharge, replace the battery.
http://h10025.www1.hp.com/ewfrf-JAVA/Doc/images/c01468528.jpg( chek the figure)
1 - Slide the battery release slider in the direction of the arrow
2 - Remove the battery
Instructions for recharging and replacing a battery are available on the HP Web site.
Solution five: Replace the power supply
If you have completed all of the troubleshooting steps and are still experiencing a problem, contact HP to replace the power supply for your product.
Solution six: Service the printer
If you have completed all the steps listed above and are still experiencing a problem, service the product.
Thanks for contacting fixya.com

Oct 18, 2009 | Dell 810 All-In-One InkJet Printer

2 Answers

Hp7260 prints only test page


please connect this printer to a different PC and see what happens.

Jul 27, 2009 | HP Photosmart D7260 Printer

1 Answer

Power lead missing


Hi Tony,

I looked at the specs for your particular HP Officejet 7130. It is extremely important to connect the correct powersource to this type of printer. All types of electrical appliances have specific amperage and wattage requirements. Connecting the wrong power supply could cause serious damage to a possible electrical fire. The following link is the installation instructions for your printer.

http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpu06196&lc=en&dlc=en&cc=us&lang=en&product=91466

On this next link, you'll find the Product Specifications:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpu06193&jumpid=ot_recdoc/bpu06196/en_us/bpu06193/loc:2&custom_solutionid=rd_bpu06196&lc=en&dlc=en&cc=us&product=91466&lang=en#N3153

Your particular printer requires a 100W and no more than 2.5Amp Max. You can call HP and inquire on a replacement power supply. The two parts that you need that are sold separate are the power cord and the power module. You will have to call HP at 1-800-227-8164. The power module replacement part no is C27296-60043. The power cord part no is 8120-6260.

Best of luck!

Apr 17, 2009 | HP OfficeJet 7310 All-In-One InkJet...

Not finding what you are looking for?
HP PhotoSmart 7260 InkJet Printer Logo

Related Topics:

161 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Vinaya Kumar...
Vinaya Kumar...

Level 3 Expert

1121 Answers

Seeker5211
Seeker5211

Level 3 Expert

1088 Answers

kakima

Level 3 Expert

98816 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...