I dont know where else to post this.
I dont know exactly know what these things are called but, in the back of the subwoofer theres the little port things with the holes for you to stick the speaker wires in, one of them isnt working for me. I try that particular speaker in another hole and it works... can these holes die? What could be the cause one of these little speaker red/black hole things are not working?
what is the name for these holes? lol
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has written 20 answers of more than 400 characters.
Re: 5.1 GMX ProMedia Issue
The jacks on the back are probably for an amplifier output and you probably have had the speaker wire stripped too long possibly shorting out the amplifier as this is a common problem, if not stripped too long it may have just failed, also you need to check by unplugging from back of computer and hook up to a walk man or something with a headphone jack, see if still dead, might also be the cable from the computer to the speakers. Good luck. :-)
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Bling factor, as long as they are all wired in phase. Downward and side fired subs are usually the "all-in-one" type with the amp built into the sub enclosure. I would stay away from those (the type with an integrated amp) because most aren't exactly good performers. I added pictures of what I was calling "bling" which is really only good for show, unless you like having more space taken up by the box and sub.
Hi, ok the Bose Acoustimass III system consists of two small cube speakers and one subwoofer unit called the Acoustimass bass module. If the subwoofer stops working, three points can be the cause of the failure. The Bose Acoustimass III is a passive system, meaning the speakers do not power themselves, but instead are connected to a receiver or amplifier. Thus, the amplifier, the speaker between the amplifier and the subwoofer, or the subwoofer itself could be the issue.
Things You'll Need:
* Amplifier * Speaker cable * Extra subwoofer
Disconnect the speaker cable from the back of the Bose Accoustimass bass module and connect it to a subwoofer that is known to be working. If the subwoofer works, the bass module needs to be replaced.
Disconnect the speaker cable from the back of the receiver or amplifier you are using and from the back of the subwoofer in Step 1.
Connect a speaker cable that is known to be working between the back of the receiver or amplifier and the back of the Accoustimass module. If the module starts working, then the cable was the issue.
Disconnect the speaker cable from Step 3 from the back of the amplifier or receiver, then connect the cable to the subwoofer port on the back of an amplifier or receiver that is known to be working. If the subwoofer works, the receiver was the issue. If the subwoofer still does not work, verify that the speaker cable is in the subwoofer port of the receiver/amplifier and that the cable is connected securely to the subwoofer.
If you think you did the connection properly,Fine... If not you can use the manual from the below link and know how to connect it properly..
check all the wires and attach your music system to any other system to see if its is working..if not there might be a hardware issue with your music system .show it to any tehnical shop who repairs computer devices like woofers to find problem. ------------------------------------------- Please let me know your feed-back.