Question about Clarion SIR-CL1 SIRIUS Radio Receiver

1 Answer

Installation question ??

I just purchased a Sirius SIR-CL3M tuner for my Clarion Radio which is in my boat. I activated the account with Sirirus and everything seemed like it was ready to go. I went ahead and completed the installation with the provided CNET cable to the source unit (XMD3) but upon trying to activate the system it gets locked up on "Updating". Since I also have a Clarion DVD unit connected to the system do I need to run another CNET cable from the Sirius Tuner to the DVD unit ?

Thanks,

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 116 Answers

With the CNET you do mthis, CD Changer to the sirius input, srius output to the Clarion input. It's just a "daisy chain". I hope I understood you right, if not, you can yell at me :-).

Larry T
Winona Lake, IN
http://www.cybersoundsaudio.com/cybersounds/vehiclepics.html

Posted on Jan 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a jbl mr17 radio on boat and have activated Sirius but have no Manuel for radio and can't play Sirius. Help


Hi Marybeth,

According to the manual, "In order to receive Sirius Satellite radio broadcast, you must install JBL SIR 3.0 as well as a satellite antenna (both sold separately)"

I've included a link the manual http://prospecelectronics.com/pub/media/wysiwyg/manuals/MR-17%203.pdf to your radio and to the Sirius Satellite Box referenced above. Also listed on that page is two satellite antenna options.
http://www.boaterbarn.com/jbl_scc1bl_sirius_box_for_8085_prd1.htm
Please note I am not recommending you purchase from that site as I haven't personally ordered anything from them. Amazon may have it listed cheaper.

Good luck with your new radio!

Oct 30, 2016 | Sirius Home Satellite Radios

1 Answer

My sirius reciever in my boat worked fine until this year now it wont work antenna is only two years old and it is a high quality marine antenna could it be the reciever it is hooked to a clarion radio...


Oxidation from humidity could have tarnished a connector somewhere. Make sure all connectors are clean and shiny first. It could be that the receiver is bad. A stereo shop should be able to check that for you easily.

Mar 13, 2010 | Clarion (NAVSIR) SIRIUS Radio Receiver

1 Answer

Can't get sound to come out of rear speakers.


go to the menu and select fade f/r then adjust until happy should be in the middel

Jun 13, 2009 | Clarion SIR-CL1 SIRIUS Radio Receiver

1 Answer

Constantly goes to "linking" whenever I select Sirius. Sirius tells me that means an antenna problem. However, I have tried a new antenna with the same results.


The unit needs to be replaced. solder pins on the PC board of the unit are broken. Clarion has about 100,000 of these units with the same problem. You can find a replacement online for $50 that's been fixed & the problem should not re-occur. Sorry for the bad news. Hope this helps

Jun 02, 2009 | Clarion SIR-CL1 SIRIUS Radio Receiver

2 Answers

Sirius Radio Invalid Channel message


1) Do you have a Sirius account?

2) Have you called Sirius and given the serial number of that receiver?

Those are the first two things you have to do to get a Sirius receiver working. (The original owner could have changed his account to use his new receiver, if he has one.) Go to http://www.sirius.com/install - the "activate" part - for details.

Aug 20, 2008 | Clarion (NAVSIR) SIRIUS Radio Receiver

3 Answers

Clarion Marine XMD3 / SIR-CL1 Sirius Troubleshooting


I had the same problem with invalid channel on all channels ! Had to reset the siriuss receiver by removing power for 15 sec and restoring! that means not just shuting it off but removing all power to the sirius unit not the clarion unit itself and reastablishing power to it turning on the clarion head unit and walah! satelite would recieve ESN and 184 and programing! Hope it works for you after 3 long waiting periods on the phone!

Oct 21, 2007 | Clarion SIR-CL1 SIRIUS Radio Receiver

3 Answers

Antenna hookup 2007 dodge ram


Just take the fakra connector (plastic piece) off and it will be just like the sirius antenna end. Then buy a 10ft extention cable... I've just order mine and will have pics when done

Aug 15, 2007 | Eclipse SIR-ECL1 SIRIUS Radio Receiver

1 Answer

Alpine CDA-9855 won't recognize SIR-ALP1


I also had this problem. I had to go through the menu into the setup and then into tuner settings. There should be an option called tuner area. If you set it to area 1 it should start working. For some reason the sirius only works on area one. Hope that solces your problem

Jun 19, 2007 | Sirius Satellite Radio Sirius SIR-ALP1...

Not finding what you are looking for?
Clarion SIR-CL1 SIRIUS Radio Receiver Logo

Related Topics:

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Clarion Home Satellite Radios Experts

John
John

Level 2 Expert

473 Answers

xxxxxx xxx

Level 3 Expert

4706 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21942 Answers

Are you a Clarion Home Satellite Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...