Question about Braun M880 MultiMix Hand Mixer

Open Question

Where do I get a replacement bowl (CA 4188034-4)?

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

KitchenAid ACCOLADE 400 Mixer.When mixing dough the bowl jumps out of the the bowl lock. How can this problem be resolved?


I know this sounds a bit simple but the bowl cup can sometimes actually wear out and a very fast (# screws) and a new one and the problem is solved. If however there is a problem on the head hold down set screw (under the mixer in the cavity ) it can come loose then the mixer head can bounce all over the place causung the bowl to get loose in the holding cup at the base of the mixer., I hope this helps, let us know if you need more, we can FixYa

Feb 22, 2015 | KitchenAid Food Mixers

1 Answer

Kitchenaid mixer glass bowl broke. I need a replacement. I have a 4c mixer. Do you know where I can find one?


The glass bowl for the 4c mixer is much different than the bowls that are currently available. Your best option is going to be to find a used bowl off of eBay.

Your other option would be to replace the bowl lock plate and buy a new bowl for the mixer. I have had a few customers say this works, and I have had a couple say that replacing the bowl lock plate and bowl did not work. So you can give this a try as well.

Mar 28, 2013 | KitchenAid Food Mixers

3 Answers

My kitchen aid mixer bowl falls out when I'm mixing


Hello Heather,

Either the grooves on the bowl lock plate are worn out, or the grooves on the actual bowl are worn out. I would start with replacing the bowl lock plate. Here is a link to the part: KitchenAid Mixer Bowl Lock Plate 4163032

This part is really easy to replace, it is held into place with three screws, remove those screws (make sure to hang onto those you will need them to re-install the new part). then you should be able to pop the old plate out. To install the new plate like up the screw holes, and press into place, sometimes you need to lightly tap it into place with a rubber mallet as it is suppose to be a very tight fit.

Once that has been replaced your bowl should lock into place tightly. However there is always a chance that the bowl has been worn down and may need to be replaced. Here is a link to the 4.5 Quart bowl: KitchenAid 4 5 Quart Stainless Steel Bowl

- Colleen @ Mending Shed.com

13965943-25j1o4dy5jqip5urp5sucdth-5-0.jpg

Aug 12, 2012 | KitchenAid K45SS Classic Stand Mixer

2 Answers

My KitchenAid bowl keeps coming loose when kneading dough. Any solutions?


Hello Heather,

Either the grooves on the bowl lock plate are worn out, or the grooves on the actual bowl are worn out. I would start with replacing the bowl lock plate. Here is a link to the part: KitchenAid Mixer Bowl Lock Plate 4163032

This part is really easy to replace, it is held into place with three screws, remove those screws (make sure to hang onto those you will need them to re-install the new part). then you should be able to pop the old plate out. To install the new plate like up the screw holes, and press into place, sometimes you need to lightly tap it into place with a rubber mallet as it is suppose to be a very tight fit.

Once that has been replaced your bowl should lock into place tightly. However there is always a chance that the bowl has been worn down and may need to be replaced. Here is a link to the 4.5 Quart bowl: KitchenAid 4 5 Quart Stainless Steel Bowl

- Colleen @ Mending Shed.com
12448327-25j1o4dy5jqip5urp5sucdth-3-0.jpg

Apr 16, 2012 | KitchenAid KSM90 Ultra Power Series Stand...

1 Answer

I need a replacement bowl for the braun km32 mixer


I have an extra bowl, but am in need of a regular whisk...any chance you have an extra and we can trade?

Jun 21, 2010 | Braun Food Mixers

1 Answer

The top of the mixer moves back and forth when in use-lose motor?


You should contact Kitchen Aid. They stand behind their products. You can call then toll free or go to their website. 1-800-461-5681

www.KitchenAid.ca

Dec 13, 2009 | KitchenAid KSM90 Ultra Power Series Stand...

1 Answer

I have a Hobart N50 and am in need of a SS bowl. The bowl pins are 8 7/8" apart. Do they make a replacement bowl for this? I've seen the ones that have 9" bowl pins. Thanks, Ron


can buy hobart bowls from lots of places, or use the correctly shaped kitchenaid ones, both fit.. i like the lip and thickness of the hobart bowls, bought mine from globe equip.. do u still have the service manual, if so i would be real intrested in it, please

Jun 14, 2009 | Hobart N50 Stand Mixer

1 Answer

New bowl & hook hobart d300


There is a website called onesharpstore.com, It carries parts for the hobart 30 quart mixer. I specifically saw the bowl and hook attachments as well as others like beaters and a cheese and vegetable grater. Hope this helps. And if you sign up I think you can even request a full catalog for your machine.

Feb 25, 2009 | Hobart D300 Stand Mixer

Not finding what you are looking for?
Braun M880 MultiMix Hand Mixer Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Braun Food Mixers Experts

Slo Mover

Level 2 Expert

185 Answers

Tom Chichester

Level 3 Expert

33282 Answers

ray gallant

Level 3 Expert

41433 Answers

Are you a Braun Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...