Question about Vodavi Starplus SP7314-08 Corded Phone

1 Answer

Be able to pick up incoming calls from all front office phone sta

Our existing system is set up where all incoming calls ring at our receptionists station only. Our receptionist position is presently vacant and we would like to have all incoming calls to ring into ALL of our front office phone stations so that several of us can "man" the incoming phone calls.

Posted by on

  • csanders Jan 22, 2009

    We have the Starplus STS phones not the DHS..We do not have a feat button.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,214 Answers

Get a copy of the manual here

http://www.cactcom.com/Manuals/Vodavi/Vodavi%20DHS/Vodavi%20Starplus%20DHS%20Installation%20And%20Maint%201995.PDF

Looks like you can group the stations together and then any one of them can answer incoming calls. See page 45 or so.

Posted on Jan 22, 2009

  • 1 more comment 
  • Mark Egan Jan 22, 2009

    Sorry, try this one.

    http://www.lantex.com/downloads/phone/Vo...


  • Mark Egan Jan 22, 2009

    I apologize for offending you in any way, and I would appreciate your telling me what I said that was unappropriate. I did respond with a copy of the correct manual, so if you can change your comment, I would appreciate, if you feel that I made corrections (note "appropriate" can be interpreted a number of ways.).

  • Lori Hartman Jan 24, 2011

    I am trying to do the same thing. Could you please explain because I don't find how to do this either. We have a part time receptionist and no on can hear the phones ring, they can see them flash. Any help would be greatly appreciated lhartman at imedrisDotcom.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

NEC Dterm80 phone, Model DTH-16D-2. We have an Extension that rings as a back-up to the main attendent/receptionist in the event she cannot answer an incoming call. I need to disable the incoming ring at...


Hi if you just want to silence the actual unit, most often you will find a small switch on the unit, that switches OFF the ringer, or often one can turn it down, via a control on the unit. Other times one can set it Off or down in volume via the settings, use the manual in these case to ascertain what to do.

www.southwesterntel.com/.../ITH-IP%20Installation%20Manual.pdf -

Above is a manual so you can check exactly what and how to do what you want.

If this cannot be done, then take the phones case OFF, locate the "Ringer" and disconnect it from the board, problem solved.

Apr 19, 2011 | NEC Dterm DTP 16D-1 Corded Phone

2 Answers

How do I set phone to ring at my extention?


Partner, all releases.
Examples
Receptionist Call Routing. If you want calls to be answered by the receptionist first, set the lines at the receptionist’s extension to Immediate Ring and the lines at the users’ extensions to No Ring. (This is the factory setting)
Receptionist Backup. If you want all calls on a line to ring directly at users’ extensions -with the receptionist providing backup -set the line at the users’ extensions to Immediate Ring. Then set the line (or lines) at the receptionist’s extension to Delayed Ring. An incoming call that is not answered by a user within 20 seconds will also ring at the receptionist’s extension.
Programming
To change the way outside lines or pools ring at an extension:
  1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
  2. Enter the number of the extension to be programmed for Line Ringing. The green lights next to the line or pool buttons on the phone show the current Line Ringing settings for all lines assigned to the extension. (If a line is not assigned to a button, the green light next to the button is off.) The following ringing options can be shown by the green light next to the line button.
    • Immediate Ring - on steady
    • Delayed Ring - flashes slowly
    • No Ring - flutters quickly
  3. To change Line Ringing for any line, press the line or pool button until the button light shows the correct setting (the setting for the currently selected line or pool also appears on the display).
  4. Continue programming or exit programming mode.

Dec 01, 2009 | AT&T Lucent MLS-12D Phone

1 Answer

Incoming calls sound only on reception desk.


Programming2.gif is done on M7310, M7324 and T7316 sets.
To set up ringing you need to enter programming by pressing the feature key followed by **266344.When prompted to enter the password enter 266344.
The screen should say TERMINALS&SETS. The 4 top line/feature keys are now used for programming.
At the terminals&sets prompt, press the show key (top right arrow). The display should now ask for an extension number. Enter extension number you wish to program ringing on. Press the show key (top right arrow)
The display should sat LINE ACCESS
Press the show key (top right arrow) .
The display should say LINE ASSIGNMENT.
Press the show key (top right arrow) .
The display ask for a line number. press list
The display should say line 001: appear only
press the Chng key till it says appear & ring
press next key (lower right arrow)
The display should say line 002: appear only
repeat the procedure the same as line 001 for the remaining ringing lines

press the release key when finished

Nov 02, 2009 | NorStar T7316E Corded Phone

1 Answer

Auto attendant does not pick


What kind of phone system? If Partner, it sounds alot like you lost all your programming, so the phone system isnt programmed to know where the voicemail is. So hwen a call comes in, the ports where the voicemail is, ring, so they pick up, but dont know what they are to do with the call, so they shove it to the receptionist.

#505 needs to be programmed, then #206, that will get you to at least asnwer incoming calls.

Need to know more, like WHAT KIND OF SYSTEM.

May 27, 2009 | Avaya AT&T Partner Phone

1 Answer

Need to set ringer on phone to ring in my office


is because the ringging assignment only set to ring at receptionist phone.
u may need contact the phone provider to set the ringging assignment to other for other phone which to ring for incoming call

Jan 14, 2009 | Toshiba DKT-2010 Corded Phone

1 Answer

Stop ringing at certian phones when outside calls come in.


http://dstech1.com/programming-line-ringing/


Partner, all releases.
Examples
Receptionist Call Routing. If you want calls to be answered by the receptionist first, set the lines at the receptionist's extension to Immediate Ring and the lines at the users' extensions to No Ring. (This is the factory setting)
Receptionist Backup. If you want all calls on a line to ring directly at users' extensions -with the receptionist providing backup -set the line at the users' extensions to Immediate Ring. Then set the line (or lines) at the receptionist's extension to Delayed Ring. An incoming call that is not answered by a user within 20 seconds will also ring at the receptionist's extension.
Programming
To change the way outside lines or pools ring at an extension:
  1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
  2. Enter the number of the extension to be programmed for Line Ringing. The green lights next to the line or pool buttons on the phone show the current Line Ringing settings for all lines assigned to the extension. (If a line is not assigned to a button, the green light next to the button is off.) The following ringing options can be shown by the green light next to the line button.
    • Immediate Ring - on steady
    • Delayed Ring - flashes slowly
    • No Ring - flutters quickly
  3. To change Line Ringing for any line, press the line or pool button until the button light shows the correct setting (the setting for the currently selected line or pool also appears on the display).
  4. Continue programming or exit programming mode.

Jan 09, 2009 | Lucent PARTNER18 Corded Phone

1 Answer

I want to pick up incoming calls from another extension


Yours may be different if your TA-308 is not a U.S. version, but the family is generally 40 picks up all calls in your group and 4+the ringing extension will pick it up. Just in case they have call pickup deny set (721) you'd have to cancel it with 720.

Carl


Nov 18, 2008 | Panasonic KX-TA308 Phone

1 Answer

Inter-tel ECX 1000


You definitely can do this with a ECX feature set if you program the lines on the keys. You've got to program "Button Hopping" off in the system this automatically puts the first call on system hold when you press the line key for the second incoming call.
I don't think there's a limit to how many you can have on hold.

Oct 23, 2008 | Inter-Tel Encore Phone

1 Answer

Why is my phone ringing?


Your Handset has been programmed i guess by mistake to be in the same ring group as the main receptionist for C0-01 . Use Google for programming manual to make changes.

www.heymot.co.uk

Oct 17, 2008 | Panasonic KX-T7633 Corded Phone

Not finding what you are looking for?
Vodavi Starplus SP7314-08 Corded Phone Logo

Related Topics:

1,003 people viewed this question

Ask a Question

Usually answered in minutes!

Top Vodavi Phones Experts

Mark Taylor
Mark Taylor

Level 3 Expert

728 Answers

Matthew MacWilliams

Level 2 Expert

97 Answers

The Knight
The Knight

Level 3 Expert

68368 Answers

Are you a Vodavi Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...