Question about HP LaserJet 3055 All-In-One Printer

1 Answer

When I recieve return fax they are small and have 2 lines running down the page cindy

Posted by on

1 Answer

You mean a fax you have sent is returned?
Then you should get the same result if you copy through the auto feeder also?
Life the auto feeder and clean the glass -primarily the narrow glass on the left side.

Posted on Mar 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm trying to fax with my Canon MX310, do the fax papers I'm sending go up or down? thanks


Documents need to be face down if you put them on the glass or face up if you have an ADF (automatic document feeder) for single sided pages.

When you put the document on the glass line up the upper right corner of the page (as looking at the back of the paper) with the marker at the left back corner of the glass. If you are using the ADF, put the paper in such that the bottom of the page goes into the ADF first.

I hope this helps.

Cindy Wells

Sep 16, 2011 | Canon PIXMA MX310 All-In-One Printer

1 Answer

Can you set the Canon PIXMA MX 870 to print a confirmation page after every fax sent?


Yes. Press Setup and navigate (right/left arrows) to Device Settings. Then press OK. Next navigate to Fax Settings (up/down arrows) followed by OK. Select TX Report (again the up/down arrows followed by OK). Select the Print for each TX option (up/down arrows) and press OK again. Then press Fax to return to the standby mode.

I hope this helps.

Cindy Wells

Sep 28, 2010 | Printers & Copiers

1 Answer

Same problem


press the setup button and scroll down to tools.
in tools there should be an option that says run fax test.
that would give you a printed page as to which part of the hardware of the printer or the fax line failed.

What your error code means is(look below)

Definition

There is too much noise on the line for a valid connection between two fax machines to complete. The noise problem might go away over time.

Solution

Retry the fax reception at a different time when telephone line conditions have improved. Call the telephone provider if line conditions fail to improve.

Jun 18, 2009 | HP OfficeJet K80 All-In-One InkJet Printer

1 Answer

Cant send faxes or recieve


Do you still have the problem?

Did you go through the entire setup procedure according to the manual including the fax/tel set up? Fax/tel setup tells the fax machine how you are using it. For example is the phone line used for just receiving faxes or is it used to receive phone calls AND receive incoming faxes OR is there a telephone answering device (TAD) attached to your phone line. If there is one, set it to 2 rigns. If you have it set to 4 rings the fax could disconnect before receiving the incoming fax. If you cannot send, then it has to be a line problem assuming you went through all the set up procedures correctly. Short of this you may have a bad unit and need to return it.

Apr 20, 2009 | Lexmark X4270 All-In-One InkJet Printer

1 Answer

Cannot recieve or send faxes


Check out the Easy Setup Instructions available here. If you can neither send nor receive faxes, you may not have the phone line connected to the correct port, see page 34 of the guide. Also check what receive mode the machine is set for. Pages 42 and 43 explain the different options and how to change the receive mode.

Mar 16, 2009 | Canon PIXMA MP780 All-In-One InkJet...

1 Answer

MY CANON ALL IN ONE PRINTER/SCANNER/FAX HAS LARGE BLACK LINE DOWN


You will probably need to clean the bottom plate and/or the print head to eliminate the problem

Feb 19, 2009 | Canon Pixma MP500 All-In-One InkJet...

1 Answer

Lines going thru the pages of fax i send


you ma try to make a copy see if have lines through the page if does, you may go to document feed unit open the cover you may see a piece glass just use alcohol to clean it should take care your problem

Dec 13, 2008 | Dell 1815dn All-In-One Laser Printer

1 Answer

Multiple fax copies only 1 or 2 get through


First check to see if all 5 are bing sent. Sometimes paper sticks to each other and you may only see 1 or 2. Also your telphone line has a lot to do with it. If you are using a digital telephone line with your internet line such as a vontage telephone, the signal is takene from your internet line for your telephone and sometimes such as when you are on the internet and trying to fax, you do not have enough signal strength. sometimes sutting off the internet works. Also what does the report say from your copier/fax are 5 pages being sent. In the set up this Canon you can get a report after you send a fax....

Jul 09, 2008 | Canon imageCLASS MF6550 Monochrome Laser...

2 Answers

LINES DOWN THE PAGE WHEN I USE AUTO FEEDER


sounds like you need to do a head cleaning. go to control panel on computer and click on faxes and copiers. right click on the printer you are have problems with and there will be a head clean and nozzle check choice run through those.

Oct 13, 2007 | HP OfficeJet D135 All-In-One InkJet...

3 Answers

Wont recieve fax


NVRAM init NVRAM init returns all stored parameters in NVRAM to factory default values or to a default ROM value, depending on the variable, and performs a system reset. Performing NVRAM init can cause the product to violate local telephone regulations. Reset the language and country/region after performing NVRAM init. ENWW Service-mode functions 265 NVRAM init resets the following settings and information: ● All menu settings are reset to factory default values, including fax header and company name. ● Factory settings such as formatter number, page counts, and factory paper settings are reset. ● All faxes in memory are erased. ● All speed-dials, group-dials, and phone book entries are erased. ● All localization settings, including language and country/region, are reset. To perform NVRAM init 1. Turn off the product. 2. Press and hold down the * and MENU/ENTER buttons. 3. Continue to hold down the buttons while you turn on the product. Hold the buttons through the entire power-on sequence. 4. When Permanent Storage Init. appears on the control-panel display, release the buttons. 5. When the message Language appears on the control-panel display, set the correct language and country/region. 6. Allow the product to return to Ready before using the product.

Jul 24, 2007 | HP LaserJet 3050 All-In-One Printer

Not finding what you are looking for?
HP LaserJet 3055 All-In-One Printer Logo

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96627 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...