Question about Home Security

Open Question

Problems with ADT Security System, DVR model # A-ADRP9E, reprograming.

It worked fine for a few years until a few months ago; we had problems and learned we needed to get a new adapter. ADT said the adapter was outdated and that we need to buy a new system. We searched and searched until we found the same exact adapter from Power-Win in Taiwan. We purchased it and had it shipped here to the states. When we plugged the system into the new adapter, we got the Hello message and then a message The HDD needs be partitioned. Do you want to continue? We clicked on yes. Then we had to reboot the system. Once the system was rebooted, we got the same message about partitioning the HDD. We get that message repeatedly. If we click on no, the system is halted. ADT said the DVR was outdated and we need to buy a new system. The system was very expensive. How long do these last, only a few years? With the economy the way it is, there is no way we can afford a new one. Is there anyone that can advise us how to reprogram the system or can tell us where to turn for support? Thank you! Lucy

Posted by on

  • Lucy Stoneman
    Lucy Stoneman Feb 22, 2013

    We found out the problem. Need a new hard drive. Thanks for your help!

×

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

fwadley
  • 482 Answers

SOURCE: Power supply problems

Look on ebay.

Posted on Nov 26, 2007

SOURCE: problem with e-recovery 10 gb hided partition, how to restart explotation system

reformat your hdd

Posted on Mar 11, 2008

  • 5 Answers

SOURCE: System Low Battery

Response 1 is correct. If you plugged the transformer into an outlet before connecting the battery the system wont see the battery and give you that error. Should be a simple fix however. Unplug the battery and then the transformer, then reverse the process. Plug in the battery and your Simon should power up, then plug in the transformer. If this doesn't help then you should replace the battery. Did you buy the system from a dealer and have it professionally installed or did you do-it-yourself? If it was professionally installed have your technician come back out to diagnose/replace the battery if needed. Good Luck.

Posted on May 19, 2008

SOURCE: PCV-W20 Partition sizes

Hi,MY SONY VAIO PCV-W20 PERSONAL COMPUTER HARD DISK GOT CRASHED,I GOT NEW HARD DRIVE I DONT HAVE DRIVERS AND I TRIED ALL THE WAY SEARCHING DRIVERS ON THE INTERNET EVEN IT IS NOT AVAILABLE ON SONY VAIO SITE, PLEASE GIVE ME SOLUTION, THANKS YM

Posted on Nov 03, 2008

SOURCE: GE Simon3 Wireless, not able to find the ID&passcode,,need help

try 6321

Posted on Nov 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I purchased a kit and my dvr stopped working


ardupilot.com - View topic - 3DR Video/OSD Kit stopped working

ardupilot.com/forum/viewtopic.php?f=72&t=10613

Dec 11, 2014 - 8 posts - ‎2 authors
I purchased the 3DR Video/OSD kit a few months ago. ... Yesterday, I went to test mysystems, and noticed it was not working. .... That test was captured via my DVRcapture device, while the outdoor image was a photo of the ...

TiVo Repair and Troubleshooting - Weaknees

www.weaknees.com/repair.php
General TiVo/DVR Problems and Troubleshooting ... Hard Drive Replacement Kit ....Purchase a WeaKnees TiVo Modem Replacement Kit; Have your internal ...

Bunker Hill Security 4-channel Surveillance DVR w

www.amazon.com/Bunker-Hill.../B005TIE70C

Amazon.com, Inc.I've since purchase another DVR KIT one for my backyard and have caught ..... Both systems stopped working within 2 months of each other in April and May of ...

Reviews - Maplin

www.maplin.co.uk/p/sentient-160gb-4...kit.../all

Maplin ElectronicsBought this kit about six months ago and worked brilliantly without any problems. Then the network part of it stopped working, it wouldn't recognise any ethernet ..... I boughtthis CCTV with DVR as my wife's car had been rifled by someone a ...

How do I reconnect my DIRECTV HD DVR to the Internet ...


Jan 13, 2016 | SWANN Home Security

1 Answer

To turn the beep sound off when system is set to armed


Troubleshooting FAQs - Solve Problems Quickly by ...

www.adt.com/help/faq/troubleshooting

The ADT CorporationHow do I silence low battery beeping? ... Why is my ADT Pulse security systemreceiving an unavailable message? ... How do I fix a disconnected camera? ... by a motion detector while the system is armed, the burglary alarm will sound. ... Some common events that may cause a motion detector to set off a false alarm ...

Five Steps: How to Stop a Beeping Security System

https://www.vectorsecurity.com/.../Five-Steps-How-to-Sto...

Vector SecurityFeb 9, 2015 - The shrilling sound of a continuously beeping security system is enough to drive anyone crazy. A power outage, faulty wiring or bad batteries ...

The Top 15 Questions about ADT Home Security Systems ...

zionssecurity.com/...security/the-top-15-questions-about-adt-home-securi...
Oct 10, 2012 - How do I turn off the voice descriptions but keep the chime sound on?... If your time on the Lynx system is not set all you need to do is push your user code + # + 63. ..... When our security alarm is not armed it beeps every few seconds ....Reasons to Install Security Cameras in your Home · Small Business ...

Jan 03, 2016 | Home Security

1 Answer

How do i change my code on an ademco m6673 without knowing the master code?


How to find the master or installer codes for an Ademco ...

security.livewatch.com/.../how-to-find-the-master-or-installer-codes-for-...
Aug 7, 2009 - ... Ademco ?€?Vista series?€ alarm system and you don?€™t knowwhat the codes are. ... The master code is the main user?€™s regular code, but different than the ... Be advised that an installing alarm company will not and should not... The master code can change or add the other SU?€™s as needed ...

Need to reprogram an ADT/ADEMCO system - DoItYourself.com ...

www.doityourself.com/.../295048-need-reprogram-adt-ademco-system.h...
Feb 17, 2007 - Purhased a condominium 2 years ago with an ADT/ADEMCO system. ... Received no manuals of any kind but MAY have gotten a "Security Code" from seller. ... To change the master code the system needs to be in regular run mode, .... myalarm system was working but i went and acted like Reset Master Code for Ademco 4111XM, Via30+ or VISTA 10 ...
Jul 8, 2007
Ademco vista 20P with FC and Comm. Failure
Nov 8, 2005
More results from www.doityourself.com

[PDF]VISTA-20SE, VISTA-20HWSE User Guide - Honeywell ...



Oct 11, 2013 | Vacuums

1 Answer

Novi doorbell intercom system won't work. Got it about 8 years ago, worked OK except for minor problems until recently. Now it malfunctions constantly. We finally had to disconnect the wiring o


If you are looking for new intercom system then I would suggest you to buy it from http://www.hulksecurity.com/ .Hulk Security System not only provides intercom systems but they also offer variety of access control system, CCTV and alarm systems. Well, I hope this would help you and have sorted the concern for intercom system.

Oct 24, 2012 | Novi Wireless Doorbell Intercom Security...

1 Answer

Have ADT 3000 series alarm system - would like to set it to max


adt sw3000 panel does not support max button on key pad. best solution would be to have ADT tech reprogram Zones so windows are perimeter zones(instant when armed away or stay) and motions interior follower (instant when no perimeter zone was triggered first). doors stay exit/entry.

Feb 25, 2010 | GE Security Simon 3 Wireless Home Security...

3 Answers

We just moved into a house and it has an alarm system that has westinghouse on it. There are sensors on every door and window down stairs. We have no idea how to turn it on and get it set up.


Call an alarm company like ADT. If they can use it they will. it will require some minor reprogramming and they will check all sensors, if the use it. 1-800-ADT-ASAP.

Feb 01, 2010 | GE Security Simon 3 Wireless Home Security...

1 Answer

I have a 40 inch Samsung TV which I've had about 3 years (sorry I Don't have the model number handy). I have DirectTV and an HD-DVR. The HD Channels were great up until about a few weeks ago. Now sometimes...


If your menus on the TV and other inputs look good then it is probably a resolution setting on your Directv box that needs to be changed. To get HD it needs to be set at 720p or 1080i. Please take a moment to rate my answer. Thanks....

Dec 02, 2009 | Televison & Video

Not finding what you are looking for?
Home Security Logo

Related Topics:

135 people viewed this question

Ask a Question

Usually answered in minutes!

Top Home Security Experts

kakima

Level 3 Expert

102366 Answers

Brad Brown

Level 3 Expert

15441 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Are you a Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...