Question about Cell Phones

Open Question

How can I unlock a Peco T12000 thermostat? It has a lock on the screen so no access is granted. Installed previously and no one knows the code that was used. Please help if you can, I've looked everywhere and Peco support is only M thru F.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
saransarana
  • 110 Answers

SOURCE: W20i unlock code - PLEASE??

u try to switch off the mob and take the battery and sim.after some time u put all and see it may work. r other wise try the following web sites.......
http://www.simplemobilephones.com/

http://www.wirelessunlocks.co.uk/?gclid=CLGf8v6v7pICFRyrbwodI0l95w

http://www.gsmok.com/index.php?mod=shop&tree=038&gclid=CP-mg5Ww7pICFRspbwodViG_4w

http://www.mobile2mobile.net/unlock/RemoteunlockingMotorola.htm?gclid=CO60i7Kw7pICFQvWbgodCyUK3w

Posted on Apr 22, 2008

Ad
  • 726 Answers

SOURCE: unlock code

ok the unlock code he would have made himself so it could be any thing?
if u enter the wrong code three times it will ask you for the puk
the puk is in the original box or you have to ring the service provider and provide all his correct details they will give you a puk then you have to enter new pass word then he will no you have been in there
or steal his phone put your sim in there he might just have a sim lock and not the phone and all the call log and messages will be on there.
or just ask him say be ******* honeset or your gone
show me your phone there will have to be a reason he wont show you. and to really get to him say this/ i think or no your cheating thats why ive been with you best friend. he will say what who and go off just say show me your phone be honest tell me and ill tell you and when or if he shows ou just say jokin to get to him
now if he says who cares your with my friend he most likeley is doing stuff behind your back
or also you can just simply kick him in the nuts
punch him in the head
write in paint on his car (cheater)
or im just mean but do all that

and for naqib_muh ,do what i said about the password and im not sending any password to remove it as we dont no it

Posted on Jul 20, 2008

izal_abis
  • 1 Answer

SOURCE: I ve Forgotten the Lock code please help me

I want to format my n gage, but i forget my lock code !!!!!!!!!!, I using a default code (12345) but isn't work, please help me !!!!!!!!!!!!!!!!!

Posted on Jul 09, 2009

krislil127
  • 55 Answers

SOURCE: I accidently locked my LG verizon mobile model vx3300

the default is always one of these code try them all the last four digits of the phonenumber last programmed in the phone aka your number or 9999,1234,4321,0000,1111 if none of those work you can go the retail store for a flash they hook it to the computer and push software to the phone to correct the issue it takes five mins and its free its a common issue for them to correct if you change your lock code from the default in the future always set up a dummy contact with it in there so that you can easily look it up also please vote for me I'm trying to work my way up to expert level and I cant without your vote please

Posted on Jun 05, 2010

  • 161 Answers

SOURCE: unlock code for sony ericsson w200i

For the best unlock code for your Sony ericsson model mobile, visit this site http://www.theunlockspot.com/sony-ericsson-w200i/rs10wp9/
It provides the step by step instructions and easy methods for unlocking your mobile phones........

Posted on Oct 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to find the network to which the phone is locked to??


Hi whether you bought your phone second hand then ask the previous owner about which provider he/she used in his phone .Sometimes a network logo might be displayed in the phone screen which is locked to network .If you came to know the network provider name to which your phone is locked from the above steps .Then sure you can easily unlock it using online providers like Mobile-Unlocker.com here they render unlock code for all mobile models at affordable cost .Here they render unlock code only for GSM locked mobile phones.

Jun 07, 2013 | Cell Phones

2 Answers

Are there any free sites for unlocking mobile phones i bought phone n net and dont know who the previous service provider was


Hi here some ways to know which network locked your mobile. they are
1.You can ask the previous owner of your mobile about which network he/she used ..
2. Samsung galaxy gio is a Canadian CDMA mobile .So you try all Canadian CDMA network .If your mobile accept any network sim then it mean its locked to that network.
3.Sometimes locked mobile comes with logo displayed in the top of screen about which network it is locked .ie if it is locked to AT&T then AT&T logo is displayed in top of the screen.
Using the above ways you can identify the network to which your mobile is locked.Then free unlock code are untrustable many times .I guide you to have a look at Theunlockarena.com here they help you unlock your Samsung Gio s5660 mobile from network lock using code.

Oct 13, 2012 | Samsung Cell Phones

1 Answer

Locked out of thermostate


From the manual:



PROGRAMMABLE KEYPAD LOCK
To prevent tampering with any of your settings or
temperatures, the front panel buttons and the rotary dial can
be locked out, requiring a four digit code to unlock them.
You may use either the default lock code of "0000", or your
own personal number combination (see "Changing The Lock
Code")


LOCKING THE THERMOSTAT: Ensure the rotary dial is in the
RUN position. Press the NEXT button for at least 2 seconds.
The words "ENTER CODE" will appear on the screen, along
with "0000". Press the NEXT button again for at least 2
seconds. A padlock should appear on the screen to confirm
that the thermostat is now locked.


LOCKING THE THERMOSTAT: Ensure the rotary dial is in the
RUN position. Press the NEXT button for at least 2 seconds.
The words "ENTER CODE" will appear on the screen, along
with "0000". Press the NEXT button again for at least 2
seconds. A padlock should appear on the screen to confirm
that the thermostat is now locked.

UNLOCKING THE THERMOSTAT: Ensure the rotary dial is in
the RUN position. A single press of any button should cause
the words "ENTER CODE" to appear on the screen, along
with "0000". If the default code was used to lock the
thermostat, press the NEXT button for at least 2 seconds.
The padlock should disappear from the screen, and the
thermostat should now be unlocked.
If you try to unlock the thermostat by entering a code that is
not correct, a padlock and the digits "88:88" will flash on the
screen and you will have to try again. If a lock code
different from the default was used, this will need to be
entered by using the UP/DOWN buttons, and the NEXT
button to advance to the next digit. Once the correct code is
entered, press the NEXT button for at least 2 seconds and
the thermostat should now be unlocked.


CHANGING THE LOCK CODE: To create your own specific
lock code, first ensure that the rotary dial is in the RUN
position. Press the NEXT button for at least 2 seconds. The
words "ENTER CODE" will appear on the screen, along with
"0000". Now press the HOLD button again for at least 2
seconds. The words "SET CODE" will appear on the screen,
along with "0000".

IF YOU FORGOT YOUR LOCK CODE: You can still unlock the
thermostat by performing the following steps: On the back
of thermostat locate JP1, which is a row of 3 metal pins at
the right edge of the circuit board above the battery tray.
There should be a plastic jumper cap on 2 of the 3 pins
(right or left).


Move the jumper cap so that it is on the opposite 2 pins.
For this change to be recognized, move the Temperature
Mode switch to any other position than its current one.
These steps listed should have changed the lock code back
to the default of "0000". Follow the instructions already
listed in "UNLOCKING THE THERMOSTAT".

Sep 02, 2012 | Lux Tx9100e 7 Day Universal Programmable...

1 Answer

Master reset Ericsson R250s pro


You may try default phone and security code to remove restrictions.
ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000

Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

Aug 28, 2012 | Sony Ericsson R250s Pro Cellular Phone

1 Answer

I can unlock my phone it has a anti theft program installed, and I don not no the lock code the previous owner had, do you know how can i unblock it


  • 1

    Contact the original service provider for your Nokia E71 to request the unlock code.

  • 2

    Ensure that there is no SIM card in the device then switch the power to on.

  • 3

    Disregard what is on the display and enter the unlock code that was obtained from Step 1.

  • 4

    "SIM Restriction Off" will appear in the display.




  • Dec 23, 2010 | Nokia E71 Smartphone

    1 Answer

    How can i program my door lock code or find out what it is. on my 2000 limited edition explorer


    FORD KEY PADS
    • Enter permanent factory code
    • Press the 1/2 button within 5 seconds to enter programming mode
    • Within 5 seconds enter new code, doors will lock, unlock to verify code, this erases previous codes remotes will also need to be programmed.
    FORD KEY PADS/REMOTES
    • Insert key, turn ignition off-to- on eight times in succession, ending with key in on position doors will lock, unlock to verify in programming mode
    • Press any button on new remote, doors will lock, unlock to verify
    • Do the previous step with the second remote, doors will lock unlock to verify.
    • Turn ignition off. Doors will again lock, unlock to verify.
    NOTE-I found that some Explorer/Mountaineers enter program mode after 5 times-not 8.

    Here is the link for further info.


    http://www.2carpros.com/how_to/how_to_reprogram_key_remote_fob.htm


    Your factory code is on a card in the owners manual. If that is lost, access the control module in the cargo area behind the left cover panel.

    You MIGHT be able to see the code printed on it, or you might need to pull it out in order to see it.

    May 27, 2010 | 2002 Ford Explorer

    1 Answer

    I lock my cell phone and forgot the code how do i reset it the phone is a i 465


    Unlock Code is a manual hard-lock on handsets which requires the correct pass code to allow access to the phone's functions.
    Occasionally, people purchase used handsets. Previous owners may have locked the handset and are unreachable to get the new pass code

    To unlock the phone using the factory default pass code, perform the following:

    1. Confirm the phone shows, Enter Unlock Code.
    2. Press the MENU button. The screen will show, Enter Security. Try both.
    3. Enter last 4 of PTN, unless you have changed the lock code, and press OK. OR
    Enter six zero's (000000) and press OK.
    *If successful, the screen will display, Phone Unlocked.
    *If unsuccessful, the screen will display "Security code is incorrect please try again."

    If the you don't know the code, You will need to contact Motorola to have it re-flashed, which may incur a service charge from Motorola.
    4. You now has access to use the phone’s functions.
    5. Do not change the Unlock Code.

    Oct 10, 2009 | Motorola Mobility Clutch i465 Cell Phone

    1 Answer

    Old phone number for my phone


    Try code 1234 or 0000. If that does not work go the screen displaying, Enter Unlock Code, press the Menu key, top center, at the Enter Security Code screen enter 000000. If this code has not been changed you should see the previous owners phone number. If this is so use it to try and unlock the phone.

    Good luck

    Mar 28, 2009 | Motorola Mobility V710

    1 Answer

    Parental pin


    Hi!

    To unlock your set requires two steps: the first is to get past the lock screen.To do that, press the QV( or previous channel?) and 9 buttons at the same time when you are asked to enter your lock code.
    Now that you're past the lock screen, find the menu that covers locking and unlocking. QV/9 (previous channel/9) is a one-time bypass; if you turn the set off, it'll be locked again when you turn it on, so you first need to LOCK it again, with a pass code you can remember (try 1,1,1,1). Once you lock it, you can exit from all the menus, then try to change inputs. It'll ask for a pass code, which you now know!

    Please ask for further clarifications and rate the solution as Fixya if found useful.

    Thanks
    Rylee

    Mar 14, 2009 | Mitsubishi WS-55513 55" Rear Projection...

    1 Answer

    Unlock code


    when the phone prompts you for the unlock code , press the menu key button it should be asking you for the security code now, if you have not changed the code it should still be 000000 this will grant you access into the phone and you can now master clear and reser the phone.

    Jun 22, 2008 | Motorola Mobility RAZR V3

    Not finding what you are looking for?
    Cell Phones Logo

    Related Topics:

    262 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cell Phones Experts

    Computer Repairing
    Computer Repairing

    Level 3 Expert

    14641 Answers

    yadayada
    yadayada

    Level 3 Expert

    76109 Answers

    William Alequin

    Level 3 Expert

    928 Answers

    Are you a Cell Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...