Question about Makita 18V LXT Lithium - Ion Cordless Impact Driver Kit Model BTD140
Why will his battery pack not fit in other makita 18v tools?
Some of the Makita 18v LXT tools require the BL1830 3.0AH battery and are designed that the 1.5AH battery will not fit.
Posted on Nov 10, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Most likely, but unless the transformer blew, which is somewhat unlikely, a good repair shop should be able to fix it. Basically the charger unit is a transformer, some diodes to convert ac into dc, and some sensing circuitry to tell you when the battery is done charging. Diodes and sensing cisrcuitry are commonly available parts and not expensive. Transformers are expensive. Even if you get it repaired youll still need an adaptor to convert from the mains 240 to the 120 that the charger wants to see. Get one with a high enough wattage for the charger. Wattage is printed on charger base.
Posted on May 20, 2008
If you have been a bad boy and managed to short the battery by using it for non-proscribed purposes, the fusible link will blow (kind of like a fuse)
To fix it, open up the battery (use a Torx 10 security bit, or a small flathead in a pinch) On the battery connection nearest the spring-loaded white catch there is a small bridge of metal with a hole in the center. If this is melted you can solder it back together by sanding the two pieces and putting a glob of solder on them. This will void your warranty (duh!) and remove the battery's fuse protection, but it WILL work again.
If the link is intact and nothing else is obviously wrong, you almost certainly have a bad cell. I recommend pulling out the bad cell ( it will be the one that does not read between 2.5 - 4 vdc) and replacing it with one from another dud battery- this requires some fudging and re-soldering.
Or do what I did, pull the cell, toss the electronics and the short pink wire, add a cigarette lighter socket and voila! you have a portable power supply giving around 14 volts. Charge it up by wiring two cigarette lighter male ends together (check polarity , + to + (tip end) and - to -) and plug it into your car, but only while it is running or you will be charging your car battery with it!
Hope that helps.
Matt Binns GiantGlobes.com
Posted on Aug 18, 2009
according to the schematic I saw yes you can and I think that you will be pleased with its performance, their operator manual even lists the weight of tool with this battery. Makita has a 1 year limited warranty on the Li-Ion battery that you might want to consider if you have the receipt.
Posted on May 12, 2011
Tips for a great answer:
Jul 06, 2012 | Drills
Oct 13, 2011 | Makita Tools 18V 1/2" Lxt Lithium - Ion...
May 11, 2011 | Makita 18V LXT Lithium - Ion Cordless...
Jul 07, 2017 | Makita Drills
Feb 18, 2011 | Ryobi Two 18V Lithium-Ion Batteries +...
Nov 01, 2009 | Makita Tools 18V 1/2" Lxt Lithium - Ion...
Aug 01, 2009 | Makita Tools 18V 1/2" Lxt Lithium - Ion...
Aug 16, 2008 | Makita Tools 18V 1/2" Lxt Lithium - Ion...
Jul 03, 2008 | Makita Tools 18V 1/2" Lxt Lithium - Ion...
Feb 06, 2008 | Makita 18V LXT Lithium - Ion Cordless...
298 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: