Error canon C1 CODIGO E000070-0201 - Canon imageRunner C3100N Copier

get manual here
http://www.scribd.com/doc/61327440/Canon-Irc3200-Service-Manual

when i turn my conon imagepress c1 printer it state and this error code come it e00001 - 001 what the problem and how can i fix it

this is fixcinx releted error

My Printer is coming up wiht a printer error B200, and i dont know what to do about it.

November 02, 2010 Product : imagePRESS C1 / C1+ Title : E020 with Multiple Sub Codes for all Colors Problem :
E020 with Multiple Sub Codes for all Colors

Solution :
Check for a pinched or damaged wire harness from PS3 Patch sensor #2 from connector J426 back to the Side Driver p.c.b at connector J3415 and at PS7 ATR sensor from connector J209 back to the Rear Driver p.c.b. connector J3802.


Canon USA, Inc. Systems & Technical Support Division

you need hard disk check, from service mode,
if not solved format hard and install system
if not solved replace hard

E747 from what I remember is the connection cable from either the scanner to the print device, or scanner to the copier. Make sure that none are loose and they are in the correct slots.
Mismatching the cables may result in the error.

Error :
E732 code

Workaround :
E732 code is a Reader communication error.
If the Reader is disconnected from the Printer a E732 code will result. Once the Reader is disconnected the logic on the MAIN-Controller is changed to a "0". The copier is now set up to be a Printer only, and will not recognize the Reader.
To correct this, you must enter service mode, COPIER>OPTION>BODY>W/SCNR and set that to "1". Then you must turn the copier off, then on.
To enter service mode: press "Additional Functions" then "2" and "8" together, then "Additional Functions".
Which User Guide? Reference, Easy Operation Guide, Printing Guide, Mailbox Guide, Sending Guide etc....

Sorry, I only speak English. Error 602-003. Your hard drive is either dead or about to be dead. Call a technician to replace the hdd and reload system software using sst.