Question about Tasco Wide Angle and Rubber 2023 (10x50MM) Binocular

Open Question

Tasco 20x50 model 314

Eye cups

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
Obertelli
  • 3006 Answers

SOURCE: I have an old tasco 7x-15x35 zoom binocular.

You can't.

Tasco optical products are very cheaply made items, usually bought direct from whichever factory already makes the same or a similar model and then Tasco have their badges and packaging added.

They are consumer grade models which are not designed with longevity or repairs in mind; they're worth little when new and almost without value as used items.

The only repairs which can be done are by Tasco themselves whilst their products are under warranty. Except for the most minor of repairs, a warranty claim will simply involve exchanging the faulty item for a new one as any labour expended in repairs will often cost Tasco more than the wholesale price of a new unit.

Your only fixes are to live with the missing eyecup; to visit a binocular repair shop (not exactly commonplace) and see if you can buy an eyecup which can be adapted by yourself to fit; or to replace yours with another pair. You'll usually find that there are plenty for free on your local FreeCycle or Freegle group but they'll often have the even worse fault of a broken eyepiece yoke. But the price is right so it doesn't really matter if you have to collect five or six pairs before getting a good pair...

With all due respect, 7x-15x35 are going to be optically atrocious, so replacing your current pair is not a bad idea.

Posted on Mar 08, 2010

Ad
bill12604
  • 13 Answers

SOURCE: I have an old tasco 7x-15x35 zoom binocular.

Measure the diameter needed and then check bicycle inner tube diameters. Cut a short section, roll a quarter-inch inside-out, slip over the eyepiece, roll the other end inside-out to form a nice soft shoulder. Costs nearly nothing, works dandy.

Posted on Nov 17, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where can i buy the prizums for a tasco 20-60x60mm zoom with the eye piece at a 45 degrees


best place is the tasco web page.. sending them an email will more than likely give results. Search for tasco parts too such as in google and ebay too.

May 29, 2014 | Optics

1 Answer

Missing a bit


Ebay has them under telescope eyepiece catagory

Apr 16, 2014 | Tasco Model 304 7 X 35 Fully Coated...

1 Answer

I have purchased a second-hand Tasco telescope, Model Luminova and would like to purchase the eye piece for it as it was missing. Could you tell me the best place to purchase this in Langley, BC Canada. ...


Probably NO WHERE-- most of us buy our accessories on-line at various scope retailers-- here are two:

http://www.agenaastro.com/

http://www.khanscope.com/

May 31, 2011 | Tasco Luminova 40060675 Telescope

1 Answer

I recently obtained a TASCO 30-060402 telescope which is missing its eye piece's. I would like to purchase a set of eye piece's for the telescope. How may I obtain the proper eye piece set.


Measure the hole on the telescope diagonal. Eyepieces come in .965, 1.25, and 2 inch sizes.

Many on-line retailers sell them here is one:

http://agenaastro.com/

Jul 05, 2010 | Tasco 350x50mm Refractor Novice Telescopes

3 Answers

I have an old tasco 7x-15x35 zoom binocular. model #100. I lost the right rubber eye cup. Where can I purchase a replacement from........Thanks


You can't.

Tasco optical products are very cheaply made items, usually bought direct from whichever factory already makes the same or a similar model and then Tasco have their badges and packaging added.

They are consumer grade models which are not designed with longevity or repairs in mind; they're worth little when new and almost without value as used items.

The only repairs which can be done are by Tasco themselves whilst their products are under warranty. Except for the most minor of repairs, a warranty claim will simply involve exchanging the faulty item for a new one as any labour expended in repairs will often cost Tasco more than the wholesale price of a new unit.

Your only fixes are to live with the missing eyecup; to visit a binocular repair shop (not exactly commonplace) and see if you can buy an eyecup which can be adapted by yourself to fit; or to replace yours with another pair. You'll usually find that there are plenty for free on your local FreeCycle or Freegle group but they'll often have the even worse fault of a broken eyepiece yoke. But the price is right so it doesn't really matter if you have to collect five or six pairs before getting a good pair...

With all due respect, 7x-15x35 are going to be optically atrocious, so replacing your current pair is not a bad idea.

Mar 05, 2010 | Tasco Rams 7X35 Binocular, Black

1 Answer

I have an older model tasco telescope. The number on it is 302003. It has the eyepiece and it seems everything else it needs but I cannot see through it. I either get a reflection of my own eye or just...


Is this a reflector or a refractor style telescope. Does it have a MIRROR in the bottom?? or just a small lens in the front of the tube (refractor)????

Aug 12, 2009 | Tasco Optics

1 Answer

Tasco Luminova 40060660 manusl


This Meade telescope is very similar--- here is the manual--

http://www.meade.com/manuals/TelescopeManuals/Refractors/Meade70AZ_AR.pdf

Jan 31, 2009 | Tasco Astronomical 302675 Telescope

1 Answer

Eye piece shows upside down


Its meant to be upside down its a newtonian reflector. If you want it to be right way up you will have to buy a diagonal eye piece or glue your shoes to the roof!

Sep 27, 2008 | Tasco Luminova 40114675 (675 x 114mm)...

Not finding what you are looking for?
Tasco Wide Angle and Rubber 2023 (10x50MM) Binocular Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tasco Optics Experts

Joe Lalumia aka...
Joe Lalumia aka...

Level 3 Expert

3186 Answers

Mark Campeau

Level 1 Expert

44 Answers

Bill Laudeman
Bill Laudeman

Level 1 Expert

13 Answers

Are you a Tasco Optic Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...