Question about Cuisinart 227020 Food Processor

Open Question

How do you clean the chopper?

I need to know how to take apart the Cuisinart Chopper to clean it. I can't access the blades!

Posted by on

5 Suggested Answers

SOURCE: Blade will not release

Our blade just came apart at the seam just above the blade, so we know what's inside. There is a small v-shaped piece of spring wire that is spread apart from the stem that is mounted to the machine. When the button is depressed (it's on a tiny spring, like a mattress spring, and that's what makes it bouncy), it spreads the v-spring wire and releases it. If you can get the seam apart, it will release the v wire and not damage the machine. Replacement blades are available on-line for $13.95, and whole machines are available on e-bay. Good luck.

Posted on Jan 06, 2008

Cerfer39
  • 709 Answers

SOURCE: blade

Look on the label and see iof you can find contact info for Ultimate chopper. A lot of times companies will offer replacement blades for customer support. Get in touch with the manufacturer.

Posted on Nov 24, 2007

ThaMp3Doctor
  • 8596 Answers

SOURCE: I bought a Cuisinart pink

Check this website to see if this is the correct food processor -manual included on page:
http://www.cuisinart.com/catalog/product.php?product_id=35&item_id=635&cat_id=361

I wouldn't reccomend putting parts in a heat-drying dishwasher - hand wash.

Posted on Dec 09, 2008

  • 1 Answer

SOURCE: Need replacement part - S Blade/Chopper Blade

You can call Hamilton Beach Customer Service at 1-800-851-8900 from 8am to 6pm ET to order the S Blade. I called to get a price for my S Blade that broke on my 702R model food processor. They quoted me $15.99 plus tax. Now I am looking on the Internet for a cheaper price. Hope this helps.

Posted on Feb 24, 2009

  • 1 Answer

SOURCE: replacement parts for the "Power Chopper blender"

The Power Chopper

also know as:

Tristar Products, Inc. Power Chopper sold by Walmart

LTK6100 Power Chopper sold by As Seen on TV sites

Tristar lists the following PO Box for warranty repairs.

POWER CHOPPER, P.O. Box 3007, Wallingford, CT 06492.

This is the real manufacturer
Ningbo Vanguard Import & Export Co., LTD
Floor 10,No 181 Zhongshan East Road,Ningbo China
Phone: 86-0574-56152263
Fax: 86-0574-56152258
Contact: muffer (General manager)
Mobile: 15958893499

You can use this link and send them a message about parts. I’m not sure if it will do any good.

http://www.diytrade.com/china/4/products/2906181/power_chopper_juicer_food_processor.html

Posted on Dec 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont my chopper blade come off in the unlocked position?


Help! My Cuisinart is Stuck! - Chowhound

www.chowhound.com/post/cuisinart-stuck-353459
Dec 21, 2006 - Read the Help! My Cuisinart is Stuck! discussion from the Chowhound food community. ... The lid seems stuck and won't come off. I've tried pressing down,... Make sure all the buttons are in the neutral position. Reply ... In case of clarification- Turn the lid back on before unlocking, then twist off. Reply.

How to remove a stuck Kitchenaid Food Processor Blade (blade in ...

https://answers.yahoo.com/question/index?qid...
Aug 25, 2009 - Now the blade in the smaller bowl (4 cup) does not come off the bowl.... UNless i take out the 4 cup bowl blade, it doesnt allow me to remove the bowl ... I've used the screwdriver method for years in my shop with nearly 100% ...

Jan 12, 2016 | Food Processors

1 Answer

I need replacement chopping blade. Help please


You should be able to do a search for your particular manufacturer and model food processor using one of the search engines. For example if you are looking for a Cuisinart model CH-4-DC chopper blade enter the search terms Cuisinart Model CH-4-DC chopper blade replacement in your search engine. Amazon is usually a pretty good place to start.

Mar 29, 2015 | Food Processors

1 Answer

My 4 cup (cuisinart)chopper grinder's motor, which grinds is burnt while the chopper motor is in good condition.Can I get the motor? How much will it cost?Is there a shop in Mumbai India where I can g


Some times it is best to get the motor rewound from a reliable rewoinding shops that are found in most places. This can work out much cheaper as ordering the motor might cost you twice the money you spend on the full unit.Also confirm if this can be brush failure , take opinion and estimate.
Rewindings shops are seen everywhere in India but choose a reputed one who can do the winding for 230 volt mains voltage with accuracy.

Nov 21, 2011 | Food Processors

1 Answer

Cuisinart DLC-7--blade stuck--cannot remove from bowl.


First off, is it a BLADE that's stuck, or a DISC?
If it's a disc, and the disc is blocking your access to the center post, put a ziploc baggie full of ice on top of the disc (right in the middle) and let it sit for about half an hour. That should shrink the plastic enough to pop it out.

If it's a blade, you can try the ice trick, or you can try Pam (or another food grade cooking spray) to loosen it up, and then just try to take the workbowl off like you usually would (aka, DO NOT grab the blade, or you'll risk cutting yourself--you can just pull up on the bowl, and the blade should pop off.

If you need further help, you can always contact Cuisinart--their phone number (according to their website, www.cuisinart.com ) is 1 800 726 0190



Good luck! :)

Aug 31, 2009 | Food Processors

2 Answers

Replacement parts for the "Power Chopper blender"


same problem too!
I have my chopping blade broke, I need the new one.
please email me (mamakoi_saja_yahoo.com) where I can order one.

Jan 27, 2009 | As Seen On TV Power Chopper PC4 Food...

1 Answer

How to attach Cuisinart blades DLC 8 to DLC7 stem


The DLC-8 blades and the DLC-7 blades are not compatible. To attach the stem, first attach the stem to one of the compatible blades - the stem should day "DLC-7" for the DLC-7 blades - by inserting the first two tabs of the stem into the first two ridges of the blade connector - the left-most tab should be sticking out past the end of the blade connector - then slide the stem into place so that all tabs fit securely into the blade connector. Next, place the end with the blade up and insert the stem into the middle of the workbowl. There is a video for all Cuisinart food processors on the Cuisinart website.

-Tha Mp3 Doctor

Jan 01, 2009 | Food Processors

1 Answer

Cuisinart DLC-1SS Mini Prep Chopper


Here is a link to the manual
Also, this product has an 18-month warranty

http://www.cuisinart.com/share/man/69_man.pdf

-Tha Mp3 Doctor

Jul 29, 2008 | Cuisinart DLC-1SS Mini Prep 2.63 Cups Food...

3 Answers

Blade


Ultimate Chopper™

Customer Service Our Live Chat customer service department is operational Monday through Friday between the hours of 6 AM and 5 PM PST. For after hours help, please leave a message, and we will get back to you via email as soon as possible.
search%3fsourceid%3dnavclient%26ie%3dutf-8%26rlz%3d1t4pcta_enus244us247%26q%3dultimate+chopper&text= close window initiate_close.gif Contact us by mail Ultimate Chopper, LLC
P.O. Box 361369
Los Angeles, CA 90036
Contact us by phone (800) 554-6061
_uacct = "UA-3009509-16"; urchinTracker();

Nov 24, 2007 | Ultimate Chopper Food Processor

1 Answer

Blade will not release


Our blade just came apart at the seam just above the blade, so we know what's inside. There is a small v-shaped piece of spring wire that is spread apart from the stem that is mounted to the machine. When the button is depressed (it's on a tiny spring, like a mattress spring, and that's what makes it bouncy), it spreads the v-spring wire and releases it. If you can get the seam apart, it will release the v wire and not damage the machine. Replacement blades are available on-line for $13.95, and whole machines are available on e-bay. Good luck.

Nov 16, 2007 | Ultimate Chopper Food Processor

Not finding what you are looking for?
Cuisinart 227020 Food Processor Logo

Related Topics:

784 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cuisinart Food Processors Experts

andika2000

Level 1 Expert

28 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Bruce Showalter

Level 2 Expert

79 Answers

Are you a Cuisinart Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...