Question about Casio XJ-S31 Projector

1 Answer

Projector problem HELP!? my projector was on whiles the utility power went out, and when the power came back i realised it had affected my projector, when i put it on (press the power button) the: POWER/STANDBY indicator stays ON (RED) whiles the LAMP and TEMP indicators keeps on blinking (RED) at the same time i am a technician but i must confess, i cant guess what the problem is, someone please help me, it is a casio XJ-S31 projector I have been putting it on and off but the problem still persists, HELP ME

Posted by on

  • Anonymous Mar 14, 2014

    i recently have bought this projector id say about a week ago. its have been installed in the classroom but i have only got round to actually turning it on today. to which i then came across the problem of "three Red lights". i have no display and i have only managed to get a blue screen up once, the message which was displayed was something along the lines of "No Display"

    Can anybody point me in the right direction
    Lewis.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,236 Answers

It wasn't able to go through the cooldown mode. turn it on and power down, letting it go through the cooldown mode. does the lamp come on at all?

Posted on Aug 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Projector problem HELP!? my projector was on whiles the utility power went out, and when the power came back i realised it had affected my projector, when i put it on (press the power button) the:...



Kindly get intouch with Cinesonic Audio Visual Pvt. Ltd. in New Delhi at 10/2, DLFIndustrial Area, Shivaji Marg, Moti Nagar,
New Delhi-110015

Contact: ' Board: +91-11-47424444 (30 Lines)'

e-mail: Robert@cavpl.com


For any problem related to Casio Projectors

Mar 21, 2011 | Casio XJ-S31 Projector

1 Answer

Hitachi ED-S3170 Projector problem


If the bulb is under warranty then take it back.

Jan 26, 2010 | Hitachi ED-S3170 Multimedia Projector

1 Answer

My lreplacement lamp is working but i can't get a signal from dvd


Make sure the DVD is connected to the Projector and both are powered up.
Select the correct input Source at your projector by going to the menu of the projector.
After a couple of seconds, it should synch up.


Sep 25, 2009 | ViewSonic Projector PJL855 Multimedia...

2 Answers

PROJECTOR PROBLEM Casio XJ 31


it wasn't able to go through cooldown mode. turn it on, power down and let it go through cooldown. does the light come on at all?

May 31, 2009 | Casio XJ-S31 Projector

2 Answers

Faulty Panasonic Projector


90% that this is a bad psu !

had mine fixed today with used psu from ebay.
try to find a faulty pt-ae900 for a exchange psu !

60€ faulty projector + 60€ psu = 120€ for pt-ae900

hooray :)

cheers,

tobias

Dec 31, 2008 | Panasonic PT-AE900U Multimedia Projector

1 Answer

Sharp XR 10X lamp replacement issues


I sent mine in. They changed the bulb and cleaned the unit. The one thing they did suggest that seemed helpful was to upgrade the firmware. They did this as part of the service. That may be your problem, but I don't know that the firmware is upgradable. Yes indeed, they do charge an outrageous price!! I went through Sharp because they would guarantee the work, and I didn't want to buy two bulbs.

Oct 01, 2008 | Sharp XR-10X Multimedia Projector

1 Answer

Projector Doesn't Power-ON


Hi bmosai

Yes you will have to replace the lamp.

The Projector will shut down and stay off as a safety feature.

May 04, 2008 | Panasonic PT L711U Multimedia Projector

2 Answers

InFocus LP530 projector not powering on


the power supply needs to be replaced. it goes after a while in this model.

Feb 09, 2008 | InFocus LP530V Video Projector 2000 ANSI...

1 Answer

No powers ups


does the lamp try to fire up
check lamphouse and fan filter safety switches

Jan 08, 2008 | Sanyo PLC-SW30 Multimedia Projector

1 Answer

No power on Compaq MP2800 Microportable Projector


I am currently struggling with this issue.
There is an easily-accessed fuse inside the projector.
I was very excited to discover this last night.
However, before you get you're hopes up (as I did) remember: If the fuse blew, something else probably went first. After buying and replacing the fuse today, I realise that I need to replace or repair the power supply as it pops the fuse every time.

Here's how to get to the fuse:
Take off the lamp.
Now, looking at the projector from the back, you need to remove the left hand side panel.
This involves taking out 2 screws from that panel, 2 from the bottom and the 2 video connector hexagonal bolt things that are also in that panel.
The panel sort of hinges off, starting from the bottom.
You will see the fuse in the bottom right corner where the power lead goes.
It is a slow-blow (time delay fuse) so get the exact same one to replace it. A pack of 10 cost me €4.19 in Maplin, Galway, Ireland.

Anyways, this did not do the job for me... the power supply set the fuses off like fireworks and also blew a few in the socket plug as well (I don't think US readers will have those)
I will let you know how I get on with the power unit....

Good luck to ye!

Sep 23, 2007 | Compaq iPAQ MP2810 Multimedia Projector

Not finding what you are looking for?
Casio XJ-S31 Projector Logo

295 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Multimedia Projectors Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Ron Chinnery

Level 1 Expert

51 Answers

Lawrence Oravetz

Level 3 Expert

7565 Answers

Are you a Casio Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...