Question about Lexmark X1270 All-In-One InkJet Printer

2 Answers

Lexmark 1270 all in one

Printer will not communicate with computer. how do i fix. i have uninstalled and reinstalled at least 8 times.
just prints total rubish,page after page ,seems to have a serious error

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Lexmark Master
  • 6,487 Answers

This can be a problem with the cable that you;re using if possible for you to try a different cable that will good and also try installing the printer software from lexmark web site so we can make sure you're using the updated one...

Posted on Jan 22, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,550 Answers

Check the cable it will be defective . Replace it .

Also check whether the printer settings is proper in control panel .

Posted on Jan 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Just reinstalled windows 8. Now printer (Lexmark s305) will not print. It is connected through the internet; but says "no communication" when hit "print". What am I missing?


firstly printing through a network need to ensure you have internet access weather home or form the office.second having correct printer driver is very important. uninstall old drivers check devices manager for installation and devices details. if the problem persist check your USB printer cable the following link should be of help. http://www.lexmark.com/publications/pdfs/2007/2009-fall/v9842009_en.pdf

May 06, 2014 | Lexmark S305 IMPACT LEXS All-In-One...

1 Answer

Printer not communicating with computer


I'm in the same boat with my Lexmark Pro208! This sucks!

Oct 13, 2012 | Lexmark Prospect Pro205 Wireless...

1 Answer

Computer and printer no longer communicating


unfortunately I had the same problem and despite extensive troubleshooting and patching system from lexmark.com I eventually just uninstalled and completely reinstalled the software with the cd. took all of 3min and problem fixed!!

Jun 05, 2009 | Lexmark X5495 Printer

1 Answer

Lexmark 1270 acts like it is printing but pages are blank.


LOOK UNDER PROPERTIES AND SEE IF PRINT TO FILE IS CHECKED. OR UNINSTALL AND THEN REINSTALL,OR CHECK SETTINGS ON THE PRINTER MAYBE SOMETHING WAS PRESSED MY MISTAKE, GOOD LUCK

Feb 01, 2009 | Lexmark X1270 All-In-One InkJet Printer

1 Answer

Lexmark 1270 scans but will not print


With the Lexmark printers communication subsystem you MUST let the driver ask for you to plug in the printer. DO NOT plug the printer into the USB port until told to do so.

To fix a fouled install :
(1) Uninstall the Lexmark drivers in Add Remove Programs
(2) Shutdown the computer
(3) Disconnect the printer from the USB port
(4) Restart the computer
(5) Run the Driver Installation software
(6) Cancel ALL attempts by windows to auto install the printer
(7) When the sofware asks for the printer connect it and continue

Dec 13, 2008 | Lexmark X1270 All-In-One InkJet Printer

1 Answer

I just put new ink Cartridges but still wont print


Hello,

Most of the time the "problem communicating with the printer" message pops up on Lexmark X1185 series when the driver gets corrupted. The best fix for this issue would be to uninstall the software first. Try connecting the USB to a different USB port (Please avoid using USB hubs, if any) and then reinstall the software. This should normally fix the printer communication issues!

Good Luck

Dec 12, 2008 | Lexmark JetPrinter X1185 All-In-One InkJet

1 Answer

Lexmark 1270


Okay, so the printer works! It is just not working with the computer. It sounds like you need to uninstall and reinstall your printer.

Aug 16, 2008 | Lexmark X1270 All-In-One InkJet Printer

1 Answer

Lexmark Printer - Lost connection to the PC?


I had to reinstall printer and download a new driver from Microsoft for Vista (by Jan 08 there were MANY revisions). It also helped to unplug printer connections, turn off computer and pug printer back in before rebooting. But you'll haveto keep doing this until you reinstall.

Feb 17, 2008 | Lexmark X1270 All-In-One InkJet Printer

1 Answer

Lexmark 1270 all in one


First try plugging into a different USB port. I have seen several machines have a port suddenly die for no apparent reason. If that dosent work, try a different USB cable. Assuming the printer is working, the only thing left is either the cable or the port you have it plugged into.

Feb 07, 2008 | Lexmark X1270 All-In-One InkJet Printer

Not finding what you are looking for?
Lexmark X1270 All-In-One InkJet Printer Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...