Question about Hotpoint Aquarius WD63 Front Load Washer/Dryer
Put the machine on to wash and started OK. Later went back to find it stopped with WASH light on and DOOR LOCKED light flashing.
Door was closed and locked, had to unplug to release door lock. Now when I try to put machine on, the door locks but the machine does not recognise that the door is closed/locked (door locked light off) and the machine will not run.
Is this a door interlock problem, or a failed electronics board? If door interlock, how tricky is it to replace?
Replacing is not too difficult. remove the door seal retainer on the front of the machine, should be a wire and spring affair, and slide the door seal away near the lock.
undo the two screws holding the lock on and swop the connector into the new one.
put some washing up liquid on the retainer before putting it back on to make it easier.
Posted on Jan 27, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 04, 2015 | Hotpoint Washing Machines
Feb 28, 2015 | Hotpoint Washing Machines
Apr 22, 2014 | Hotpoint Aquarius WD640 Front Load...
Oct 22, 2012 | Washing Machines
Apr 07, 2010 | Hotpoint Aquarius WF000 Front Load Washer
Dec 02, 2009 | Hotpoint Aquarius WF000 Front Load Washer
Oct 07, 2009 | Hotpoint Aquarius WMA42 Front Load Washer
Dec 10, 2008 | Hotpoint Aquarius WF000 Front Load Washer
836 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: