Question about Samsung CLX-3175FN Color Laser All-in-One Printer
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
we use chip and fuse for samsung cartage reset when it give us cartage empty message. before geetting thish we gets tonner is low .if recently we filled samsung dust/powder/tonner in cartage we no need reseter. in my practics while i need to put fuse (reseter) i put iton cartage after resetin suddenly i putout it from cartage and use old fuse. in this way we can use or not green chips? actuly it is difficult.
Posted on Jun 12, 2009
SOURCE: CLX-3175 refill
Refill not recommended. Replacement is the way to go. You can pickup replacement toner cartridges from you local electonics store or where you purchased from.
Posted on Aug 14, 2009
All of the manufacturers do the same thing to get people to buy their toners, if any toner is empty you don't get to print even black. Sometimes empty toner can scratch a drum so that's the excuse they use for making them that way.
Posted on Feb 05, 2010
if you fill them your self, like i do, it will say "TONER EMPTY" then it will say STOP.
if you press the right arrow, it will say "CONTINUE" then press ok.
This way you should be able to print using the refilled cartiridges, but every time you open the fuser cover, or the printer gets turned on and off, it will ask you the same quiestion.
if you accidently press STOP, dont worry, just turn it off and turn it on again, and it will ask you it again.
Incase you need toenr powder, refill supermarket supply the powder, if you email them, they will give you a link to the requred toner powder.
it costs about £26 inc shipping uk, to refill the printer.
Hope this helps.
Posted on Mar 28, 2010
Dev. Home error can be fixed by stretching out a solenoid spring on the power cord
side of the printer. The solenoid acts as a clutch to stop the spinning
developer actuator at the right spot.
The problem is that the spring gets weak over time / the cogs round out over time and the solenoid finger is overcome by the spinning cogs, and resulting in selecting the wrong developer.
Open up the right side (power cord side) of the printer (take off top cover, then take off side cover). Then, find a solenoid (little metal square) that touches the white plastic vertical spur gear. Take the spring off the solenoid. Now, put the spring back on - only this time you will attach one anchor point to the middle of the spring as to pre-stretch the spring for more tension.
More pictures of the solenoid on Facebook:
Posted on Jul 10, 2010
Tips for a great answer:
Sep 27, 2013 | Zynga Texas HoldEm Poker
Nov 23, 2011 | Fuji Xerox Phaser 3155 Laser Printer
Jul 10, 2011 | Samsung CLX-3175FN Color Laser All-in-One...
Jul 04, 2011 | Samsung CLX-3175FN Color Laser All-in-One...
Mar 05, 2011 | Samsung CLX-2160N All-In-One Printer
Feb 14, 2011 | Samsung CLX-3175FN Color Laser All-in-One...
Jan 06, 2011 | Samsung CLX-3175FN Color Laser All-in-One...
Aug 18, 2010 | Samsung CLX-3175FN Color Laser All-in-One...
Feb 12, 2010 | Samsung CLX-3175FN Color Laser All-in-One...
200 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: