Question about Compaq Presario SR1103WM-B (PC183B#ABA) PC Desktop

1 Answer

LCD Monitor stays on 4 bit resolutionm

I have a Compaq Presario SR1103WM PC and bought an ACER 2216 LCD monitor. I tried installing the software that came witjh the monitor and it keeps telling me that I need drivers.

I tried going to Start - Control Panel - Display to change the Settings to 32 bit and the monitor size but it keeps flipping back to 4 bit after I enter. This should work with plug and play even without the CD software??

Is there something I can set on the PC or do I need drivers..Helllp!!!

(The monitor is fine with another PC)

Keith P

Posted by on

  • Keith Piercey Jan 22, 2009

    It was the drivers for the Intel video card. I downloaded it - installed -problem resolved!! Thanks!!



    Keith P

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 184 Answers

Its your VGA card that's having issues with the LCD display. Try reinstalling the VGA drivers see if it works.

Posted on Jan 22, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The compaq will not boot up


try loading your OS cd but it will wipe out all the files on your drive. if this wont still work, then it might be prob with the hard drive itself. replace hard drive.

Mar 31, 2010 | Compaq Presario SR1103WM-B (PC183B#ABA) PC...

1 Answer

HI,switch pc on and it powers up ok but doesnot boot up.Cd drive will open and close but no display on monitor.?


you hav to check out boot drive... if it would be ok thn u need to just re-install boot driver from concerned window system support..

Dec 15, 2009 | Compaq Presario SR1103WM-B (PC183B#ABA) PC...

1 Answer

Hp computer monitor


Hey, the problem you are getting is caused by the pc, when you switch on the pc it sends a signal from the graphics card to the monitor to come off sleep mode and display a picture,

it could be the graphics card, or memory or something more serious,
would try taking out the graphics card and memory and putting them back in see if the machine starts up.. works most of the time..

All the best

John

Jul 26, 2008 | Compaq Presario SR1103WM-B (PC183B#ABA) PC...

1 Answer

Blank screen and no lights on keyboard and mouse


*check the power cables

*check the power outlet

*check smps is fine

*check power switches are properly connected

*check in bios hdd is enabled

*open the case wheather the connections are properly connected

Jun 27, 2008 | Compaq Presario SR1103WM-B (PC183B#ABA) PC...

1 Answer

Black screen when i turn on computer.


Do a power drain :- Disconnect every cord from the back of computer tower while the pc is oiff and then press and hold down the power supply button in front of the tower..
have u tried updating the bios any time before?
Secondly,is it possible to go to the safe mode or the screen goes blank even before that?

Jun 27, 2008 | Compaq Presario SR1103WM-B (PC183B#ABA) PC...

1 Answer

Blank screen


When you say "When I turn on the computer the monitor acts like it is getting no power", do you mean the light on monitor doesn't come on or it does and it states it has "No Signal"? If it says no signal then it is receiving power just no signal from computer. What kind of connection is it? Digital(white) or analog(blue)? Is the keyboard wireless or is it PS/2?

If the keyboard isn't wireless and you're plugging the monitor in correctly I would say it's a power supply issue. Try changing the outlet you're using and/or bypass the surge protector to plug directly into wall.

Jun 24, 2008 | Compaq Presario SR1103WM-B (PC183B#ABA) PC...

Not finding what you are looking for?
Compaq Presario SR1103WM-B (PC183B#ABA) PC Desktop Logo

Related Topics:

124 people viewed this question

Ask a Question

Usually answered in minutes!

Top Compaq Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18375 Answers

Abhinandan  Patil
Abhinandan Patil

Level 3 Expert

568 Answers

Are you a Compaq Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...