Question about Blueant Supertooth 3 Bluetooth Handsfree Speakerphone
I had the blueant st3 attached to iphone4, which now i want it attached t iphone 5 i have removed it from iphone 4 but it wont connect to iphone 5 it keps saying no phone found.. help
Reset the device. turn it off, press and hold the volume plus and the green button until you hear a siren. turn off the st3 and turn it back on. choose the language desired then search for devices using your phone
Posted on Apr 17, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Make sure the device is in pair mode, to put it into pair mode hold the green button down until you hear a language loop (with the device off). When you hear the language of your choice let go of the green button and press it once right away. When you hear that go to your phones bluetooth menu and enter pin code 000 when prompted. If this does not work do a hardreset on your phone by removing the battery while it is powered on, when it is back up research and repair and it should work.
Posted on Dec 15, 2010
What you need to do is to put the device into pair mode before hand, to do this with the device off hold down the green button until you hear a language loop. When you hear the language of your choice let go of the green button and press it once right away. When you hear a message about your phones bluetooth menu, go to your bluetooth menu and search for devices. Select the ST3 and enter the pin code 0000 if prompted. If at that point it is not accepting that code, do a hard reset on your phone. To do this remove the battery from your cell while it is powered on(if u have an Iphone do a full power cycle) when your phones back up search again enter the pin and it should work.
Posted on Dec 13, 2010
SOURCE: is Blueant ST3 Compatible with
Any bluetooth device should work with the iPhone4. Here is the directions for "pairing" from the BlueAnt website.
Posted on Jan 08, 2011
Step 1: Activate Pairing Mode on the Supertooth 3
Make sure the Supertooth 3 is turned off.
You can tell if the Supertooth 3 is on or off by looking at the light on the front. If the light is on or flashing, then the Supertooth 3 is on: turn it off by holding down the Multi-Function button (the green button) for about 5 seconds, until you hear the voice announce that the Supertooth 3 is powering down.
With the Supertooth 3 off, hold down the Multi-Function button for about 6 seconds, until the light on the front of the unit starts flashing red and blue.
The Supertooth 3 will now prompt you to select your language: press the Multi-Function button when you hear your language spoken.
The Supertooth 3 is now in pairing mode.
Step 2: Apple iPhone
Now you need to use your iPhone to search for Bluetooth devices:
Wait for your phone to search for devices, then select your BlueAnt device from the list.
If you are prompted for a PIN, enter 0000 (four zeros).
Your BlueAnt device is now paired.
Posted on Jul 12, 2011
Tips for a great answer:
Jan 03, 2015 | Apple iPhone 6
Oct 22, 2013 | Apple iPhone Smartphone
Feb 17, 2011 | Cell Phones
Jan 08, 2011 | Blueant Supertooth 3 Bluetooth Handsfree...
Dec 04, 2010 | Blueant Supertooth 3
Dec 04, 2010 | Blueant Z9 Wireless Headset
Sep 07, 2010 | Blueant Blue Ant 091193 Supertooth II...
Jun 11, 2009 | Blueant Blue Ant 091193 Supertooth II...
Jun 07, 2009 | Blueant Blue Ant 091193 Supertooth II...
218 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: