Question about Locks & Locksmithing

Open Question

Gatehouse electronic keypad deadbolt skips and won't turn when activated

Electronic keypad deadbolt won't turn when lock button is pushed or when code is entered. It is skipping like its not connected

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: I bought Rona Collections Electronic Deadbolt. My

You must ensure the deadbolt is in the locked position when attaching the control mechanism. The control mechanism must also be set to the locked position. Turn the manual knob to the left then attach the mechanism (with the batteries) to the flat pin. You can do all of this with the door open, so you can enter the codes. My initial install created the same issue. It worked properly out of the package, so that meant that I screwed something up. You don't need to return the item. Just do a little fault finding.

Posted on Dec 28, 2011

Ad
aquaman987
  • 927 Answers

SOURCE: My electronic deadbolt is unlocking

This lock has the capacity for two different codes. Did you program two codes into it? If you did not, there may be a factory code pre-programmed into it and it may be the center button. Make sure you have good batteries and program two codes.
Good luck,
Gary

Posted on Jan 09, 2011

  • 963 Answers

SOURCE: My Kwikset Electronic Deadbolt is

Here's the installation instruction sheet for the 907-15. Pay particular attention to page 6, where it mentions the left or right-hand installation of the lock, and the need to move the jumper to change the function accordingly.

http://s7d5.scene7.com/is/content/BDHHI/40486-02

Posted on Mar 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Shlage keypad dead bolt unlocks when you press the


Does my Schlage BE365-CAM BE365CAM505 have a feature that allows it to automatically lock the deadbolt without having to enter code and turn the dial?
Sort of. The lock has what is called the "turnlock" feature. When enabled, you have to only push the Schlage button, then manually turn the dial. When disabled, you have to enter the user code, then turn the dial.

To enable/disable this feature, enter your Programming Code--press the Schlage button--Press 7.

Each time you do this, you toggle between enabled and disabled.

Videos for installing and programming can be found on this page:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Scroll down and find them under the heading Electronic Security--Keypad deadbolt 365

Aug 31, 2012 | Schlage Camelot Deadbolt Keypad, Satin...

1 Answer

Weiser Power deadbolt works backwards on keypad


I have installed your Powerbolt, but when I push the Lock Button, it unlocks? What should I do?
First remove the cover on the inside of the Powerbolt unit. On the right hand side under the batteries, you will notice that is says "Door Direction Jumper". If the cap is mounted on Prongs 1 & 2, carefully remove it and move it over so that it mounts Prongs 2 & 3. A is right handed, B is left handed.
http://www.weiserlock.com/Support/Faq/50160000000HhmZAAS.aspx

Aug 18, 2012 | Weiser Lock ED1460X3VKD Powerbolt 1000...

1 Answer

Door will unlock without entering code


"Does my Schlage BE365-CAM BE365CAM505 have a feature that allows it to automatically lock the deadbolt without having to enter code and turn the dial? "
Sort of. The lock has what is called the "turnlock" feature. When enabled, you have to only push the Schlage button, then manually turn the dial. When disabled, you have to enter the user code, then turn the dial.

To enable/disable this feature, enter your Programming Code--press the Schlage button--Press 7.

Each time you do this, you toggle between enabled and disabled.

Feb 15, 2012 | Schlage BE365-PLY BE365PLY626 Satin...

1 Answer

Can't push one button to lock anymore


Does my Schlage BE365-CAM BE365CAM505 have a feature that allows it to automatically lock the deadbolt without having to enter code and turn the dial?
Sort of. The lock has what is called the "turnlock" feature. When enabled, you have to only push the Schlage button, then manually turn the "dial". When disabled, you have to enter the user code, then turn the dial. So either way, you still have to turn the dial.

To enable/disable this feature, enter your Programming Code --press Schlage button--press 7

Each time you do this, you toggle between enabled and disabled.

"How can I program my electronic keypad lock when the instructions with the Programming Code have been lost?"
The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

Complete installation & programming instructions can be found here:

http://consumer.schlage.com/Project%20Documents/P515-858.pdf

Notice that the above is a .pdf filetype. That means that you need to have Adobe Reader or similar installed on your computer to view it. So if you are unable to view the file, download (for free) and install Adobe Reader first. You can get it here:

http://get.adobe.com/reader/

Good luck-and please provide feedback if this helps!

Aug 12, 2011 | Schlage BE365-PLY BE365PLY626 Satin...

1 Answer

Does my Schlage BE365-CAM BE365CAM505 have a feature that allows it to automatically lock the deadbolt without having to enter code and turn the dial?


Sort of. The lock has what is called the "turnlock" feature. When enabled, you have to only push the Schlage button, then manually turn the "dial". When disabled, you have to enter the user code, then turn the dial. So either way, you still have to turn the dial.

To enable/disable this feature, enter your Programming Code --press Schlage button--press 7

Each time you do this, you toggle between enabled and disabled.

"How can I program my electronic keypad lock when the instructions with the Programming Code have been lost?"
The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.

Complete installation & programming instructions can be found here:

http://consumer.schlage.com/Project%20Documents/P515-858.pdf

Notice that the above is a .pdf filetype. That means that you need to have Adobe Reader or similar installed on your computer to view it. So if you are unable to view the file, download (for free) and install Adobe Reader first. You can get it here:

http://get.adobe.com/reader/

Videos for installing and programming can be found on this page:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Scroll down and find them under the heading Electronic Security-Keypad Deadbolt BE365

Good luck!

Aug 11, 2011 | Schlage BE365-CAM BE365CAM505 Lifetime...

1 Answer

My keypad won't light up when door is locked whe you push lock won't light up green


To make the keys light up when you want to enter your code, you have to push the lock button on the keypad first. If the keypad light never comes on, open the door and manually lock the interior lock, then press the keypad lock button. The above instructions should then work.

Good luck--and please provide feedback if this helps!

Aug 04, 2011 | Kwikset 909 909-L03 Lifetime Polished...

1 Answer

The number illumination has gone out. How to fix?


My keypad won't light up when door is locked when you push lock won't light up green:

To make the keys light up when you want to enter your code, you have to push the lock button on the keypad first. If the keypad light never comes on, open the door and manually lock the interior lock, then press the keypad lock button. The above instructions should then work.

Jan 07, 2011 | Schlage BE365-PLY BE365PLY626 Satin...

2 Answers

Do you know how to reprogram digital code?? kwikset 907 lock


1) Remove back cover (instructions usually are stuck on the inside of the back plate cover .. if not continue next ...
2) Make sure all batteries are fully secured.
3) Press the square Reprogram button
4) Press the keypads of your code. If you do not hear any sound when pressing the buttons, then it means your batteries are not fully secured.
5) After entering your code, press the middle keypad (lock) once.
6) To double check things are working right, then press the keypad buttons again and then when you see the deadbolt is unlocked, then press the middle keypad (lock) again to ensure the deadbolt comes out to lock.

Recommend periodic lubrication of the deadbolt lock for less strain on the batteries ,,, and lubricate the key lock occasionally as well.

Jan 06, 2011 | Kwikset 907 907-15 Satin Nickel Powerbolt...

1 Answer

I have a BE365 Lock on my door. When I go to lock the door it wants the code punched in and the knob turned. When i unlock it, it just wants the schlage button pushed and knob turned. HELP


How do I enable the alternative setting (Code Turn)? (BE365 Deadbolt only)
1.) Enter your current 6-digit programming code
2.) Push the button
3.) Press 7 on your keypad

Nov 16, 2010 | Schlage BE365-PLY BE365PLY626 Satin...

1 Answer

I need to change my code on a kwikset model 907-l03 asap


Take the cover off on the inside.
A push the program button
B enter the desired 4-8 digit code
C push the lock button to set your code
D enter your code to insure it retracts the deadbolt
To enter a second code push the program button twice and repeat steps B thru D

Jan 24, 2009 | Kwikset 907 907-L03 Lifetime Polished...

Not finding what you are looking for?
Locks & Locksmithing Logo

Related Topics:

2,121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Locks & Locksmithing Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

ray gallant

Level 3 Expert

47720 Answers

Tom Chichester

Level 3 Expert

38003 Answers

Are you a Lock and Locksmithing Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...