Question about Office Equipment & Supplies

1 Answer

Minolta ep3000 service m1 ? and how to reset ? can you help

Minolta ep3000 service m1 ? and how to reset ? can you help.
thanks

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 126 Answers

M1= main motor

1. Does the transport motor (M1) operate during power up?
NO, Ensure the connection of the connector (PJ21A) is secure.
2. Replace the transport motor.
YES, Check if there is excessive load on any of the rollers,gears,etc.
3. Replace PWB-A.

Posted on Jan 24, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have call message service M1 on my bizhub 250.How to clear?


Sir/Mam there is no M-1 on that model are sure? Does it say PC DRUM needs replacing in the upper left of the screen? Or a code like C-0958 (example)

Sep 22, 2014 | Konica Minolta bizhub 250 All-In-One Laser...

1 Answer

I have a Minolta EP3000 it is not getting power. I checked the out let and replaced the cord with no luck. Is there a fuse or reset button?


The main power 220 enter in the main relay.I attach the schematic diagram and the error codes table,hope I can you help.For any other problems please contact me.2_23_2013_1_21_48_pm.jpg2_23_2013_1_21_59_pm.jpg2_23_2013_1_22_15_pm.jpg2_23_2013_1_22_29_pm.jpg2_23_2013_1_22_44_pm.jpg2_23_2013_1_22_59_pm.jpg2_23_2013_1_23_11_pm.jpg2_23_2013_1_23_21_pm.jpg2_23_2013_1_23_34_pm.jpg2_23_2013_1_23_46_pm.jpg2_23_2013_1_23_57_pm.jpg2_23_2013_1_24_11_pm.jpg2_23_2013_1_24_24_pm.jpg

Feb 21, 2013 | Konica Minolta Office Equipment & Supplies

1 Answer

On display showing problem code 500


Sir,
To clear this code requires you to gain access to the System reset. Open front door locate a small panel with one screw to release it in side will find two small black buttons find service and let machine reset if the code persists then your fusers is gone, the EP3000 is a legacy equipment may find a problem in locating spare parts if the thermistor, thermosat or fuser lamp is shot. Ensure machine is on when you attempt above.

Sep 06, 2012 | Minolta Office Equipment & Supplies

1 Answer

Why are my minolta EP3000 copies very dark all the time?


has the optics been cleaned all the mirrors below the big glass how about the drum and developer has it been replaced?

Jun 29, 2012 | Minolta EP1083 CS/PRO Copier

1 Answer

Error co500 cspro ep3000


open front door to your left a small access cover remove the screw press the trouble reset button. if the code comes back have a konicaminolta tech look at it, continue reset may start a fire you are resetting code for the fuser the hot part of the copier

Oct 13, 2011 | Minolta EP4000/5000 CS/PRO Copier

1 Answer

Minolta cs pro EP3000 copier. The copy is too dark even on lightest.thanks


Clean the optical parts:mirrors,lens and the charge and transfer/sepaRATOR CORONAS.

May 13, 2010 | Office Equipment & Supplies

2 Answers

EP3000 error code c0500 will not clear


Sir,
To clear this code requires you to gain access to the System reset. Open front door locate a small panel with one screw to release it in side will find two small black buttons find service and let machine reset if the code persists then your fusers is gone, the EP3000 is a legacy equipment may find a problem in locating spare parts if the thermistor, thermosat or fuser lamp is shot. Ensure machine is on when you attempt above.

Feb 02, 2010 | Konica Minolta DiALTA Di200 Copier

2 Answers

Error message M1


Press Utility / Counter -> {STOP}{0}{0}{STOP}{0}{1}, now you should be in Service Mode. Go to Service Choice - > IU LIFE STOP MODE -> and choose CONTINUOUS.

Mar 19, 2009 | Konica Minolta bizhub 180 All-In-One...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

276 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

k24674

Level 3 Expert

7993 Answers

yadayada
yadayada

Level 3 Expert

71694 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...