Question about Philips 42FD9932 42 in. Plasma Television

1 Answer

NO POWER ON PHILIPS 42PF9966/37

I BOUGHT THE PHILIPS 42PF9966/37 MODEL ON SEPT. 05. THE TV WONT POWER BACK ON AGAIN. I AM SO UPSET BECAUSE THE TV IS OUT OF ITS WARRANTY AND ITS GOING TO COST ME AROUND 900.00 TO FIX IT. IS IT WORTH FIXING? THE POWER SUPPLY WENT OUT ON  IT. CAN ANYONE HELP

Posted by on

  • notallbad1 Mar 20, 2009

    Please can you tell me the power board part number, is it FPF10P-DC180A? Trying to source a board for another TV which I believe uses the same P.Supply but need confirmation. Many thanks

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

I had the same problem with a philips 42FD9932 and fixed with a great online tutorial. Just replace 3 capacitors available at Radioshack onthe the board. 2662, 2663, 2664 1 is a 1000uf the others are 100uf. Max Volts need to be over 25. It worked great, check http://dynamicorange.com/2008/06/25/fixing-a-plasma-tv/
for more detail.

Posted on Mar 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tv wont turn on when i press the power button on the tv ?


Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit.Contact any service technician.If you wish to get some details; check the site linked here.Surf the site with patience.Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis.

Aug 03, 2014 | Philips Televison & Video

1 Answer

I have a 42" philips plasma with 8 red blinks


90% of the time this is capacitor related in the power supply, Remove the back and check for capacitors that are domed shaped on top, Replace these and all should be ok.

Mar 05, 2010 | Dell W2600 26 in. LCD Television

3 Answers

Class action lawsuit Philips Defective tvs


Philips TVs **** - whoever said "Just buy a new power board fix ur tv" obviously works for Philips - again, Philips has horrible products that break and no customer service. Everyone that has ever purchased a Philips TV complained about it online. I wish I knew before I bought the piece of broken **** sitting in my living room.

Nov 22, 2009 | Philips 50PFP5332D 50 in. Plasma...

1 Answer

Philips Flat TV locks up on one channel and won't change


hi i need help cause my philips47pfl7704dif7 when i turn on the tv it just turn blue and wont let me change sources or channels . Help me.

Jul 25, 2009 | Philips Televison & Video

2 Answers

Philips tv model id: 19pfl5422d/27 terrible loud sound


The issue is 4 1000uF X 10V on the main board under the shield close to the connector that from the power board. you will see them because they will be FAT( exploded)

Feb 28, 2009 | Televison & Video

1 Answer

Tv wont turn on


Switch off the surge protector for 2-3 minutes then switch back on and TV should work.

Feb 19, 2009 | Philips Magnavox 27MS343S 27" TV

1 Answer

Philips TV Model 32DW6557/05 Screen Problem


hi it sounds like a capacitor in the verticle circuit located on the main board. it is near the verticle ic. the verticle ic also could be bad the cost is around 85 dollars for a tv shop to fix. sometime a cold joint could be found around vert ic. a soldering iron is required with solder.tap the side of tv if picture comes back it is just cold solder joint.

thanks Doctor video

Apr 25, 2008 | Televison & Video

3 Answers

Philips DVDR3570H/05 constantly looping on startup


I had this problem, it was solved by reformatting the hard-drive.

NOTE: if you do this, all settings and all that is saved on the harddrive is lost. But seeing that you can't start it anyway, that is acceptable, right? :)

Anyway, here's how you do it, according to Philips support:

  1. Pull out the power cord from the socket.
  2. Press and hold PREV and STOP (i.e. left and down) on the front panel.
  3. Plug the power cord into the socket again.
  4. Wait until the front panel says "FMT KEY" to let go of the buttons. Wait for it to finish formatting, upon which you will get "-- --" on the panel.
Restart the box and you should now end up at a screen asking you to set the language for the box, as if being started for the first time ever.

Also of note: if you want to restore the firmware to factory settings, Philips support told me to pull the cord, press and hold the STANDBY button, and plug it back in again. For the looping problem though, I didn't need that.

Apr 09, 2008 | Televison & Video

5 Answers

Philips 37 flat screen


U better have it checked by a qaulified tech

Sep 09, 2007 | Initial HDTV-322 32 in. LCD Television

Not finding what you are looking for?
Philips 42FD9932 42 in. Plasma Television Logo

Related Topics:

1,617 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72640 Answers

matt martin
matt martin

Level 3 Expert

1207 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...