a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Test your webcam here to make sure it broadcasts OK - Hit 'Allow' in the top window and check your cam in the left hand panel.
Having proved your cam is working ,you can configure it to WLM (MSN)
CONFIGURE SOFTWARE to MSN Its good practice to disconnect and re-connect your webcam before you start - if you have been using it elsewhere the MSN software may have difficulty in locating it, even if you exited the previous program correctly. The reason being, the webcam software can remain hooked-up to a program and needs to be rebooted. Mine, I just unplug it from the USB and plug it back in to reboot the software. If yours is integral with the computer you will have to re-start the computer, use a keyboard shortcut or disable / enable the webcam from the Device Manager.
Open MSN Click 'Open Menu' From 'Tools', navigate to, and click, 'Audio and Video setup' Set your speakers Click 'Test' - if OK, move on. Set your mic as default Use the slider to set volume and test. Click 'Next' This takes you to the video setup Your webcam should be broadcasting - if not - make sure the webcam is set as default - restart MSN Use 'Webcam Settings'to fine tune the picture. Click 'Finish'
You need to reinstall the driver again.
1. Disconnect camera from USB port
2. Remove driver by: right click on 'My Computer', 'manage', 'device manager', right click on the VX-1000, 'uninstall'....
4. Ignore popup 'do you want to blah blah..'
5. Install driver from driver disk or file
7. Connect camera
8. Test using MSN audio/video tuning wizard
Adjust your browser security setting to allow webcams if you have flash micro media you will see the camra security but if you go to internet setting you can ajust the broswer setting from there .make sure that your firewall allow your webcam .then let me know how you did
you need to also set cam up for msn followAfter you start Windows Live Messenger, expand the view by clicking on the square on top left next to the red X. Then on the Windows Live messenger window on the right side, click on “ “Show Menus.” And then click on “Show the Menu Bar”. Next go to the Menu Bar on right side, click on Action. Go to “TOOLS” and click “Audio and Video Setting and follow the instructions. these instructions
let me know if this helps
Hi, Make sure you are not running the Desktop Icon program first. The camera can only be used by one program at a time. Now login to Messenger, and click Tools > Audio and Video Setup, and click Next past the audio settings, and choose USB Video Device from the list. It should work after a couple of seconds. If that doesn't work, try the other device drivers from the list, waiting a couple of seconds each time, until you can see some output in the window. Then apply and you're ready to go. It's the same deal with Skype, except it's in Tools > Options > Audio Settings.
I know a lot of people are having problems with the acer cam
if you updated msn try going back to your old version
or if you have'nt updated it you can try that.
The only other thing is to uninstall cam and reinstall
I've had to that so many times on my acer crystal eye cam